Hi Yixun, On October 2 I tested the K1 reset consumers on OrangePi RV2 and R2S using a combined build that included v2 7/8 from k3/for-next at f4d1c8807a, together with my unposted OrangePi board support:
- OrangePi RV2: SDHCI microSD boot, PCIe NVMe link and scan, USB 3 stick enumeration, EMAC DHCP/ping, and FreeBSD boot. - OrangePi R2S: SDHCI eMMC boot in HS200, USB host start, EMAC DHCP/ping, and FreeBSD boot. PCIe was not exercised by U-Boot on this board. These are historical K1 regression results from that combined build, not a new isolated test of 7/8. K3 hardware paths were not exercised. Tested-by: Dave Klotz <[email protected]>
