Remove the usb_p4_vbus regulator and the xhci4 vbus-supply that uses it.
GPIO 87 does not switch a USB VBUS on these boards; it enables the DSI
panel's VDD rail. USB port 4 has no switchable VBUS, so describing one
only turns the panel supply on whenever the port is powered.
Fixes: 32dd41059c83 ("arm: dts: mediatek: add USB/PHY nodes for Genio 520/720")
Signed-off-by: David Lechner <[email protected]>
---
arch/arm/dts/mt8371-genio-common.dtsi | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/arch/arm/dts/mt8371-genio-common.dtsi
b/arch/arm/dts/mt8371-genio-common.dtsi
index 123133b0eb8..b1ec5aba082 100644
--- a/arch/arm/dts/mt8371-genio-common.dtsi
+++ b/arch/arm/dts/mt8371-genio-common.dtsi
@@ -55,15 +55,6 @@
enable-active-high;
};
- usb_p4_vbus: regulator@4 {
- compatible = "regulator-fixed";
- regulator-name = "p4_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&pio 87 0>;
- enable-active-high;
- };
-
firmware {
optee {
compatible = "linaro,optee-tz";
@@ -401,7 +392,6 @@
};
&xhci4{
- vbus-supply = <&usb_p4_vbus>;
status = "okay";
};
--
2.53.0
