The poll bound is not specific to the split. No functional change.
Signed-off-by: Vincent Jardin <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> --- (no changes since v5) Changes in v5: - New patch, split out of "set SD1 with a table" board/nxp/lx2160a/serdes_split.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/board/nxp/lx2160a/serdes_split.c b/board/nxp/lx2160a/serdes_split.c index 1a5c44e7740..aeae8fbb340 100644 --- a/board/nxp/lx2160a/serdes_split.c +++ b/board/nxp/lx2160a/serdes_split.c @@ -264,7 +264,7 @@ static void print_rcw_view(int sd) #define SPLIT_PCCE 0x00000100 /* E100Ga off, E100Gb on */ #define SPLIT_PCCD 0x11110000 /* E25Ga..E25Gd on */ -#define SPLIT_POLL_US 10000 /* NXP waits ~100 cycles */ +#define SRDS_POLL_US 10000 /* NXP waits ~100 cycles */ static bool srds1_split_state(unsigned long base) { @@ -298,7 +298,7 @@ static bool srds1_is_unsplit(unsigned long base) */ static int poll_clear(unsigned long reg, u32 bit) { - int us = SPLIT_POLL_US; + int us = SRDS_POLL_US; while (us--) { if (!(in_le32((void __iomem *)reg) & bit)) @@ -352,7 +352,7 @@ int lx2160a_serdes1_split(void) if (poll_clear(SRDS_LNmTRSTCTL(base, master), RSTCTL_HLT_REQ) || poll_clear(SRDS_LNmRRSTCTL(base, master), RSTCTL_HLT_REQ)) { printf("lx2160a serdes: LN%c did not halt within %d us, continuing\n", - 'A' + master, SPLIT_POLL_US); + 'A' + master, SRDS_POLL_US); ret = -ETIMEDOUT; } @@ -381,7 +381,7 @@ int lx2160a_serdes1_split(void) if (poll_clear(SRDS_LNmTRSTCTL(base, m), RSTCTL_RST_REQ) || poll_clear(SRDS_LNmRRSTCTL(base, m), RSTCTL_RST_REQ)) { printf("lx2160a serdes: LN%c reset did not complete within %d us\n", - 'A' + m, SPLIT_POLL_US); + 'A' + m, SRDS_POLL_US); ret = -ETIMEDOUT; continue; } -- 2.43.0
