Hi E Shatto, On 02:51 Wed 07 Oct , E Shattow wrote: > On 10/6/26 22:11, Yixun Lan wrote: > > Add the default configuration for SpacemiT K3 boards, using the > > Pico-ITX device tree as the default. > > > > Configure U-Boot to run in RISC-V supervisor mode and enable the > > platform clock, reset, GPIO, pinctrl, I2C, PMIC and regulator drivers. > > Also configure the memory layout, debug UART and basic filesystem > > commands required to boot on the platform. > > > > Reviewed-by: E Shattow <[email protected]> > > Signed-off-by: Yixun Lan <[email protected]> > > --- > > configs/spacemit_k3_defconfig | 51 > > +++++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 51 insertions(+) > > ...
> > On condition of patch dependencies applied as outlined in the cover > letter to provide PINCTRL_SPACEMIT_K1 SPACEMIT_GPIO (implied > RESET_SPACEMIT_K3) CLK_SPACEMIT_K3 ; With that, > Yes, I've checked, it's all correct, no worry > Reviewed-by: E Shattow <[email protected]> -- Yixun Lan (dlan)
