On Wed, 07 Oct 2026 05:11:30 +0000, Yixun Lan wrote:
> Add initial support for SpacemiT K3 Pico-ITX board, the config file
> will enable all basic components which make it able to run into U-Boot
> serial console.
>
> The series actually depend on previous sent patches, I'm not adding
> dependency to this series, but list it here for reference.
>
> [...]
Applied, thanks!
[1/4] board: spacemit: add SpacemiT K3 Pico-ITX
https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit/-/commit/31d3bdb0e37d568e951f6b861999c8e9e7132b40
[2/4] riscv: dts: spacemit: k3: add binman node
https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit/-/commit/262a0267b6635eab951c0070229976ba75aedf2d
[3/4] configs: spacemit: Add K3 default configuration
https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit/-/commit/d56972c3f331de89e19a4c6d21ea2a53416f84db
[4/4] doc: spacemit: k3: Add Pico-ITX board
https://git.u-boot-project.org/u-boot/custodians/u-boot-spacemit/-/commit/ee7bd2529853076ca717a5cf61ec232992fdfa58
Best regards,
--
Yixun Lan <[email protected]>
