Allow the USB hub to work instead of hanging the whole board when attempting to configure the USB controller for HSIC.
The obsolete CONFIG_MXC_USB_OTG_HACTIVE setting is removed; it was unused by the MBa7, as all VBUS enable signals are controlled as regulators. Signed-off-by: Nora Schiffer <[email protected]> --- configs/tqma7_common.config | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/configs/tqma7_common.config b/configs/tqma7_common.config index 9b055849ad1..03ece307974 100644 --- a/configs/tqma7_common.config +++ b/configs/tqma7_common.config @@ -98,13 +98,18 @@ CONFIG_PHY_GIGE=y CONFIG_FEC_MXC=y CONFIG_RGMII=y CONFIG_MII=y +CONFIG_PHY=y +CONFIG_NOP_PHY=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX7=y +CONFIG_POWER_DOMAIN=y +CONFIG_IMX_GPCV2_POWER_DOMAIN=y CONFIG_DM_PMIC=y CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_ANATOP=y CONFIG_DM_RTC=y CONFIG_RTC_DS1307=y CONFIG_CONS_INDEX=5 @@ -114,7 +119,6 @@ CONFIG_SYSRESET=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_IMX_THERMAL=y CONFIG_USB_EHCI_HCD=y -CONFIG_MXC_USB_OTG_HACTIVE=y # CONFIG_WATCHDOG_AUTOSTART is not set CONFIG_IMX_WATCHDOG=y CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y -- 2.55.0
