Le 30/10/2026 à 13:27, Markus Schneider-Pargmann a écrit :
Add a helper to wait for TIFS initialization to be finished. Effectively
this is just a call to get_ti_sci_handle() but I think a separate
function makes the purpose of this call better visible.
get_ti_sci_handle() internally leads to fetching the TIFS version with a
message and response. TIFS only responds once initialization finished.
If a response is not received get_ti_sci_handle() returns after a
timeout.
Tested-by: Richard Genoud <[email protected]> # on j722s HS-FS
Signed-off-by: Markus Schneider-Pargmann <[email protected]>
---
arch/arm/mach-k3/common.c | 10 ++++++++++
arch/arm/mach-k3/common.h | 1 +
2 files changed, 11 insertions(+)
diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
index 6e382efdb3be..480c90cfa65f 100644
--- a/arch/arm/mach-k3/common.c
+++ b/arch/arm/mach-k3/common.c
@@ -54,6 +54,16 @@ struct ti_sci_handle *get_ti_sci_handle(void)
return (struct ti_sci_handle *)ti_sci_get_handle_from_sysfw(dev);
}
+void k3_sysfw_wait_ready(void)
+{
+ /*
+ * Wait for TIFS initialization to finish. This helper is used to make
+ * sure TIFS removed the firewall before U-Boot tries to unlock CTRL_MMR
+ * registers and continues the boot.
+ */
+ get_ti_sci_handle();
+}
+
void k3_sysfw_print_ver(void)
{
struct ti_sci_handle *ti_sci = get_ti_sci_handle();
diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h
index 37ff98d89924..146b986febc6 100644
--- a/arch/arm/mach-k3/common.h
+++ b/arch/arm/mach-k3/common.h
@@ -38,6 +38,7 @@ void disable_linefill_optimization(void);
int remove_fwl_region(struct fwl_data *fwl);
void remove_fwl_configs(struct fwl_data *fwl_data, size_t fwl_data_size);
int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr);
+void k3_sysfw_wait_ready(void);
void k3_sysfw_print_ver(void);
void k3_dm_print_ver(void);
void spl_enable_cache(void);