Don't treat it as HP Jetdirect, instead, use the printer server in lpd/lpr
mode,
and use rm=printername (with IP set in /etc/hosts), and rq=raw or print or
LPT1
depending on the printer server.
Ours works fine that way.
George
PR1|pr1:\
:ml=0:\
:mx=0:\
:sd=/var/spool/lpd/PR1:\
:af=/var/spool/lpd/PR1/PR1.acct:\
:sh:\
:rm=printfast1:\
:rp=PORT1:
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] Behalf Of Brutzman, Bill
>Sent: Wednesday, February 02, 2005 3:07 PM
>To: '[email protected]'
>Subject: [U2] Printronix + HP-Ux + JetDirect
>
>
>We have a legacy Printronix P300 greenbar printer that we would like to
>LAN-connect to our new HP-Ux server via an external HP JetDirect print
>server.
>
>I took a stab at a few of the generic drivers that come bundled with
>HP-Ux... without luck.
>
>Comments would be appreciated.
>
>Regards,
>
>--Bill
>-------
>u2-users mailing list
>[email protected]
>To unsubscribe please visit http://listserver.u2ug.org/
-------
u2-users mailing list
[email protected]
To unsubscribe please visit http://listserver.u2ug.org/
