Looking at your list Dynamic Connect working almost certainly means that you are connecting using telnet - unless you connected serially...
Which sort of makes me wonder about the other aspects as to which telnet client you are using which is not working... I tend to agree that a fresh install may allow you to make substantial progress but I would also suggest that you try breaking down the elements more as I suspect there is one key element which is causing the problem. My view is that the seeming confusion Windows Firewall has about whether it is up or down is where you should focus your attention... -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Tod Sigafoos Sent: 12 August 2005 15:50 To: Robert Paterson Subject: Re[2]: [U2] Connection Problems with Ud6 and UV10 Robert, Friday, August 12, 2005, 1:07:04 AM, you wrote: RP> What problem are we trying to fix at the moment? <snip> This has become 'a' problem. So many tries .. no hits and who knows who is on base So, when i get back to the office on monday I will re-install windows on the laptop and attempt installation with fresh install. As for the problems (and they persist) 1) I can not connect through the Intercall api as it returns with RPC not running. 2) I can not connect through telnet (even after changing ports) The Telnet screen comes up and blinking cursor BUT if I hit return the cursor drops a line and blinks there. 3) UniAdmin would not connect. RPC problem again 4) I could connect through 'Dynamic Connect' i think it was called. It went to the DEMO system so I know the DB is working fine So there you are .. the basic symptoms .. original and persistent. Thanks -- DSig ````` David Tod Sigafoos ( O O ) _______oOOo__( )__oOOo_______ "...our behavior matters more than the beliefs that we profess." Elizabeth Deutsch Earle ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/ This e-mail is for the use of the intended recipient(s) only. If you have received this e-mail in error, please notify the sender immediately and then delete it. If you are not the intended recipient, you must not use, disclose or distribute this e-mail without the author's prior permission. We have taken precautions to minimize the risk of transmitting software viruses, but we advise you to carry out your own virus checks on any attachment to this message. We cannot accept liability for any loss or damage caused by software viruses. ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/
