Hi Mark, I cannot help, but have you tried posting this on the rainingdata forum.
Lots of experienced d3 users on there, no disrespect to the u2 guys here and also the technical staff at RD constantly monitor the forum and answer a lot of questions. Regards andy -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Johnson Sent: 27 November 2005 15:24 To: [email protected] Subject: [U2] USB printer on D3 I have D3 installed on an Windows Xp system. I have a HP 1020 LaserJet printer (USB) that works fine on the windows side. I've properly created the device with 1 page eject. I have the printer folder open and when I send a print-job, I hear the wheels spinning on the printer but nothing comes out. I've appended 2-3 char(12)'s to the end of the job to kick it but to no avail. When I go to windows and print a test page, that job waits until I power-down the printer. The D3 job disappears and the test page comes out. Any suggestions? Thanks in advance. Mark Johnson ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/ ------- u2-users mailing list [email protected] To unsubscribe please visit http://listserver.u2ug.org/
