Kevin, I've found using the ASCII version of the Accuterm transfer to be 'acceptable' regarding speed.
A couple of things: Depending on the version of the FT programs, you may be limited to 10-meg files. A couple of tweaks here and there and that can easily be changed to 100-meg or more. Unfortunately, no control characters, except perhaps the CR/LF are transferred in this method. So you'll have to CONVERT all <tab> to '|' for example, transfer the file and convert them back again. Depending on what you're transferring, this may not be an issue. Sincerely, David Laansma IT Manager Hubbard Supply Co. Direct: 810-342-7143 Office: 810-234-8681 Fax: 810-234-6142 www.hubbardsupply.com "Delivering Products, Services and Innovative Solutions" -----Original Message----- From: u2-users-boun...@listserver.u2ug.org [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Kevin King Sent: Thursday, April 29, 2010 12:32 PM To: U2 Users List Subject: Re: [U2] AccuTerm File Transfer I realize this is an old thread now, but is there any way to improve the speed of the AccuTerm file transfer (preferably using an error correcting protocol)? On SBClient a 25K file takes a couple of seconds, on AccuTerm the same file takes about 30 seconds. _______________________________________________ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users _______________________________________________ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users