Tom,

A very short assessment...

The migration will be relatively straight forward and not complex at all.
Since you are doing a "push" migration to a new system, your fall back plan
is to go back to your original system should you have problems.  (In place
migrations are much more complex and have considerably more risk.)

Given that you are at a pretty current release (UV 10.0.3), the migration
will be easy.  Since UV is object code compatible, there is no need to
recompile anything.

There are three major cycles:
1) Initial machine setup, install of AIX, UV & Application Programs
2) moving the data for end user testing (and the actual end user testing
cycle)
3) moving the data for the actual go live (and post go live support)

You would have to make sure you have all of the GCI subroutines built in to
UV when you migrate.

You may have to run fnuxi against the files if the high order bit is not
the same.  Maybe someone can chime in if this needs to be run.

My personal recommendation is to go to the most current release of the O/S
& UV.  Usually, it is quite some time before someone in your company would
give you authorization to do an upgrade.  It is usually 2-3 years, (unless
there is a problem is discovered that requires an upgrade to do a defect).

Regards & Good Luck!
   Steve

   Stephen M. O'Neal, CDP
   IBM Data Management Solutions
   U2 Professional Services, Special Projects



                                                                                       
                                                       
                      "Downey, Thomas A                                                
                                                       
                      454"                     To:       "'U2 Users Discussion List'" 
<[EMAIL PROTECTED]>                                   
                      <[EMAIL PROTECTED]        cc:                                    
                                                        
                      .com>                    Subject:  RE: U2 hardware conversion 
inquiry                                                   
                      Sent by:                                                         
                                                       
                      u2-users-bounces@                                                
                                                       
                      oliver.com                                                       
                                                       
                                                                                       
                                                       
                                                                                       
                                                       
                      03/08/2004 11:21                                                 
                                                       
                      AM                                                               
                                                       
                      Please respond to                                                
                                                       
                      U2 Users                                                         
                                                       
                      Discussion List                                                  
                                                       
                                                                                       
                                                       




Thanks for the reply,
I didn't believe the hardware would be an issue, I believe it will be to
IBM
AIX.
Tom

             -----Original Message-----
             From:             Jeff Schasny [SMTP:[EMAIL PROTECTED]
             Sent:             Monday, March 08, 2004 1:03 PM
             To:         U2 Users Discussion List
             Subject:          RE: U2 hardware conversion inquiry

             Would that be DEC/COMPACQ/HP Unix to IBM AIX or DEC/COMPAC/HP
             WinNT/2000/3003 to IBM AIX or DEC/COMPAQ/HP WINwhatever to IBM
WINwhatever?

             Hardware isnt really the issue.

             -----Original Message-----
             From: Downey, Thomas A 454 [mailto:[EMAIL PROTECTED]
             Sent: Monday, March 08, 2004 10:01 AM
             To: '[EMAIL PROTECTED]'
             Subject: U2 hardware conversion inquiry



             We are a UniVerse shop that is investigating moving off our
DEC/COMPAQ/HP
             hardware.

             Our company is a heavy user of IBM equipment and I am
inquiring on
folks'
             experience with moving UniVerse from the DEC/COMPAQ/HP to an
IBM
system. I
             am looking for very high level information.

             I know that most of the time, "the devil is in the details"
but I
have
             worked with PICK on various hardware platforms in the past
without
any real
             troubles and just need some general information c/o
DEC/COMPAQ/HP to
IBM to
             present to our team.

             Thanks,

             Tom Downey

             Universe 10.0.3
             Digital UNIX


++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
             CONFIDENTIALITY NOTICE: If you have received this e-mail in
error,
please
             immediately notify the sender by e-mail at the address shown.
This
e-mail
             transmission may contain confidential information.  This
information
is
             intended only for the use of the individual(s) or entity to
whom it
is
             intended even if addressed incorrectly.  Please delete it from
your
files if
             you are not the intended recipient.  Thank you for your
compliance.
             Copyright (c) 2004 CIGNA


++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


             --
             u2-users mailing list
             [EMAIL PROTECTED]
             http://www.oliver.com/mailman/listinfo/u2-users
             --
             u2-users mailing list
             [EMAIL PROTECTED]
             http://www.oliver.com/mailman/listinfo/u2-users


++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
CONFIDENTIALITY NOTICE: If you have received this e-mail in error, please
immediately notify the sender by e-mail at the address shown.  This e-mail
transmission may contain confidential information.  This information is
intended only for the use of the individual(s) or entity to whom it is
intended even if addressed incorrectly.  Please delete it from your files
if you are not the intended recipient.  Thank you for your compliance.
Copyright (c) 2004 CIGNA

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


--
u2-users mailing list
[EMAIL PROTECTED]
http://www.oliver.com/mailman/listinfo/u2-users
-- 
u2-users mailing list
[EMAIL PROTECTED]
http://www.oliver.com/mailman/listinfo/u2-users

Reply via email to