Perhaps something like http://www.digital-loggers.com/poe48.html or http://tycononline.com/midspan-injectors/
On Fri, Oct 24, 2014 at 6:07 PM, Andris Bjornson <[email protected]> wrote: > I've been doing DIN rail style small NEMA enclosures at POPs for a while > now using Packetflux, Mikrotik and other similar equipment, but now I find > myself needing to figure out a similar setup for a rackmount installation. > My input voltage is -48VDC at a telco colocation site. > > I like the gigabit speeds and per-port control of 24V / 48V PoE voltages > on the EdgeSwitch and the Netonix switches - but those of course want AC > input. > > Seems like the straightforward option may be to find a 1U Rackmount, 48V > inverter. Any good brands / suggestions? Would ideally be ethernet > manageable. I'm seeing a lot of high wattage (1000W+) models (Cotek and > UniPower) and would like to find something smaller / less expensive. > > Open to alternate suggestions too, definitely need rackmount and trying to > minimize the number of rack U required. > > Thanks! > ᐧ > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > -- -RickG KyWiFi
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
