I had this happen last night. Finally found Chain 0 blown on nsm5. Reading -82 while Chain 1 -66. Started 4 am on the 11th. Also had false noise floor reading -81. New radio reads -108. Neighbor about 100 yards further away same signal path no problems and radio readings were normal.
Replaced radio and all is well. I think the radio got cranky at -10 degrees and said enough is enough. Sincerely, Jason Pond Grizzly Internet, Inc On Nov 13, 2014 8:52 AM, "Josh Luthman" <[email protected]> wrote: > So I've got this customer that's got a pole at the end of the lane, > installed the radio months/years ago at -67. Worked great. > > Yesterday they called they're having problems. Signal is right around the > same for the last 6 months+. Upgraded from 5.5.2 to 5.5.8 and after that > it was totally screwed. If I block all the other radios from associating > it would kind of work, I could at least log in. Once I have others > associate it was screwed (all other customers are fine). > > This morning replaced the radio and all was well. Is it possible that the > flash was bad and that's what caused both the original issues (the > call/complaint) as well as becoming much worse after writing the new AirOS? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
