I had the same signal for me.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Nov 13, 2014 1:57 PM, "Jason Pond" <[email protected]> wrote:

> I had this happen last night.  Finally found Chain 0 blown on nsm5.
> Reading -82 while Chain 1 -66. Started 4 am on the 11th.  Also had false
> noise floor reading -81. New radio reads -108.   Neighbor about 100 yards
> further away same signal path no problems and radio readings were normal.
>
> Replaced radio and all is well.  I think the radio got cranky at -10
> degrees and said enough is enough.
>
> Sincerely,
>
> Jason Pond
> Grizzly Internet, Inc
> On Nov 13, 2014 8:52 AM, "Josh Luthman" <[email protected]>
> wrote:
>
>> So I've got this customer that's got a pole at the end of the lane,
>> installed the radio months/years ago at -67.  Worked great.
>>
>> Yesterday they called they're having problems.  Signal is right around
>> the same for the last 6 months+.  Upgraded from 5.5.2 to 5.5.8 and after
>> that it was totally screwed.  If I block all the other radios from
>> associating it would kind of work, I could at least log in.  Once I have
>> others associate it was screwed (all other customers are fine).
>>
>> This morning replaced the radio and all was well.  Is it possible that
>> the flash was bad and that's what caused both the original issues (the
>> call/complaint) as well as becoming much worse after writing the new AirOS?
>>
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>>
>> _______________________________________________
>> Ubnt_users mailing list
>> [email protected]
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
> _______________________________________________
> Ubnt_users mailing list
> [email protected]
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users

Reply via email to