My son tells me that if he downloads the firmware straight from Ubiquiti
via the pop up at the lower right instead of manually uploading the
firmware to install it then he does not need to load the firmware
multiple times to get 5.5.10 to work. Hopefully the is helpful.
Mark
------ Original Message ------
From: "Mathew Howard" <mat...@litewire.net>
To: "Ubiquiti Users Group" <ubnt_users@wispa.org>
Sent: 12/8/2014 6:44:05 PM
Subject: Re: [Ubnt_users] Old Rockets, weird problems
I'm thinking more likely, after about the 5th flash, stuff will start
going away again... until eventually the radio will just be completely
disabled. :P
--------------------------------------------------------------------------------
From:ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on
behalf of Mike Hammett [wispaubntus...@ics-il.net]
Sent: Monday, December 08, 2014 5:09 PM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] Old Rockets, weird problems
Per Josh Reynolds's recommendation, I flashed 5.5.10 twice. That let me
choose DFS channels. I flashed it a third time and it let me get
5150.The first and last config files are identical. The one in the
middle is just reverse alphabetical order from the others.
If I just keep flashing can I get 4.9 and all the other bands? Maybe it
becomes a 10GigE radio?
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--------------------------------------------------------------------------------
From: "Josh Luthman" <j...@imaginenetworksllc.com>
To: "Ubiquiti Users Group" <ubnt_users@wispa.org>
Sent: Monday, December 8, 2014 5:06:39 PM
Subject: Re: [Ubnt_users] Old Rockets, weird problems
That makes no sense, how would multiple identical writes get different
results?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Dec 8, 2014 6:02 PM, "Mike Hammett" <wispaubntus...@ics-il.net>
wrote:
UBNT: If at first first your firmware does not succeed, try, try, try,
try, try, try, try again.
I had to flash 5.5.10 three times to get what I'm supposed to be
getting. Well, that I'm aware of. If anything else is missing, I'll
have to go again. ;-)
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--------------------------------------------------------------------------------
From: "Josh Reynolds" <j...@spitwspots.com>
To: "ubnt users" <ubnt_users@wispa.org>
Sent: Monday, December 8, 2014 4:37:08 PM
Subject: Re: [Ubnt_users] Old Rockets, weird problems
And you're on 5.5.10 after double-flashing, right?
josh reynolds :: chief information officer spitwspots ::
www.spitwspots.comOn 12/08/2014 01:16 PM, Mike Hammett wrote:
Nope, no DFS channels after setting US and picking a channel in 5.8.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--------------------------------------------------------------------------------
From: "Mike Hammett" mailto:wispaubntus...@ics-il.net
To: "Ubiquiti Users Group" mailto:ubnt_users@wispa.org
Sent: Monday, December 8, 2014 10:52:50 AM
Subject: Re: [Ubnt_users] Old Rockets, weird problems
Thanks to Josh Reynolds:
XM.v5.5.6# cat /tmp/system.cfg | grep -i dfs
radio.1.dfs.status=enabled
So DFS is enabled. I noticed that the top of 5.8 is only around -80
noise, so maybe I can get a link after all.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--------------------------------------------------------------------------------
From: "Josh Luthman" mailto:j...@imaginenetworksllc.com
To: "Ubiquiti Users Group" mailto:ubnt_users@wispa.org
Sent: Monday, December 8, 2014 10:25:55 AM
Subject: Re: [Ubnt_users] Old Rockets, weird problems
That's what I'm thinking
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Dec 8, 2014 at 11:20 AM, Mathew Howard <mat...@litewire.net>
wrote:
I wonder if there's some kind of a bug with entering the DFS code
when it's in compliance mode.
--------------------------------------------------------------------------------
From:ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on
behalf of Mike Hammett [wispaubntus...@ics-il.net]
Sent: Monday, December 08, 2014 10:19 AM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] Old Rockets, weird problems
On the lower versions mine does not have the checkbox. I assume that
I already entered that DFS information long ago when I received it
from UBNT
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--------------------------------------------------------------------------------
From: "Kees H" <wi...@calbroadband.com>
To: "Ubiquiti Users Group" <ubnt_users@wispa.org>
Sent: Monday, December 8, 2014 10:17:25 AM
Subject: Re: [Ubnt_users] Old Rockets, weird problems
You must have already DFS enabled in that rocket. Mike is talking
about an older rocket before DFS was approved on the rockets.
I ran into the same issue trying to use the 5240. I upgraded
directly to 5.5.10 and no DFS nor 5160-5240 was avalable. I
downgraded checked the uni box entered my codes and voila when I
upgraded to 5.5.10 there was the 5160-5240. (eventhought those are
not DFS :-)
----- Original Message -----
From:Josh Luthman
To:Ubiquiti Users Group
Sent: Sunday, December 07, 2014 5:17 PM
Subject: Re: [Ubnt_users] Old Rockets, weird problems
I just upgraded a pair of Rockets to 5.5.10 and was able to enable
DFS.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Dec 7, 2014 8:11 PM, "Jason Bailey" <j284...@yahoo.com> wrote:
Going back to 5.5.8 and clicking the uni-2 box on the system page
will get you there.
On Sunday, December 7, 2014 8:08 PM, Kees H
<wi...@calbroadband.com> wrote:
You have to downgrade the software ( I think it was 5.5.4 that had
the DFS key) then enter the dfs key and then upgrade.
----- Original Message -----
From:Mike Hammett
To:Ubiquiti Users Group
Sent: Sunday, December 07, 2014 11:00 AM
Subject: Re: [Ubnt_users] Old Rockets, weird problems
I believe that has been done.
Definitely the reboot both sides.
The DFS checkbox\fields are definitely not there.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com/
--------------------------------------------------------------------------------
From: "Josh Luthman" <j...@imaginenetworksllc.com>
To: "Ubiquiti Users Group" <ubnt_users@wispa.org>
Sent: Sunday, December 7, 2014 12:47:46 PM
Subject: Re: [Ubnt_users] Old Rockets, weird problems
Old rocket, plug in DFS credentials for your company, reboot BOTH
SIDES. BOTH.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Dec 7, 2014 1:45 PM, "Mike Hammett"
<wispaubntus...@ics-il.net> wrote:
I have some old Rockets (maybe 5.2.1 vintage?). I upgraded them
as needed throughout the years. The past day or two, performance
in on part of the network has been erratic to say the best of
it.
I noticed that they were in Compliance Test mode, but didn't
have the input boxes for the DFS stuff, so I must have entered
it at one point, but never actually moved over. They were on
5.5.2.
Don't fuck with what works. Well, now it's not working right.
I upgrade to 5.5.4, then 5.5.10. I set the country code to
US.... no DFS channels show up on the AP.
Do I need to reboot it after setting it to US so that I can get
the DFS channels?
A reset to defaults and starting over is kinda out of the
question at the moment.
Any other ideas?
If I have to climb to replace radios, ePMPs are going up
instead.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com/
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
--------------------------------------------------------------------------------
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
--------------------------------------------------------------------------------
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing
list
Ubnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
