The distance is 3.5 miles. The location is Santa Clara Valley south of San Jose, CA.
I like the idea of powering the link from the Netonix although there are Mikrotik CRS125-24Gs located at both ends On 9/23/2016 5:27 PM, Tommy Adams wrote: > We are using a MikroTik ccr1009 on each end and bonding two interfaces. > Using active backup for the mode, arp for link monitoring and layer 2 for > transmit has policy. Fails over instantly; might lose one ping. > > How far is your link going to be? What part of the country? > > Tommy > > > ----------------------------------------------------------- > Tommy Adams > Network Administrator > Digitex.com > > 817.558.6230 Voice > 817.558.1204 Fax > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Roy > Sent: Friday, September 23, 2016 2:06 PM > To: Ubiquiti Users Group <[email protected]> > Subject: [Ubnt_users] Backup radio > > We are putting a plan together for an AirFiber 24 link to our main tower and > will use the existing AirFiber 5X as a backup link. > > The question is the use of STP as a mechanism to switch between the main and > backup links. The switches at each end are Netonix. Is STP on the Netonix > usable for this or do I need to find an alternative? > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > . > _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
