Replaced the AirGrids with an NSM2, works great! ????what??? Hey, there
is no best channel, all are good. AirView, just as useless as ever
Jan V
On 11/10/2016 10:35 AM, [email protected] wrote:
Id suggest running a spectrum analyzer on the AP side find the
cleanest channel. Normally with lopsided rates and a good signal this
fixes that kind of situation for me. Ive never personally been a fan
of the grids though. I think they are not dual pol. so if that doesnt
help swap the grid around. (havent used one in years this may have
changed)
--------- Original Message ---------
Subject: [Ubnt_users] Air Grid M2 to Rocket M2 lousy connection
From: "Jan Van Kort" <[email protected]>
Date: 11/10/16 12:34 pm
To: "Ubiquiti Users Group" <[email protected]>
Got a Rocket M2 with 120sector array as an AP. Cannot seem to get an
Air Grid HP to connect properly. TX/RX will show 6.5Mbps/130Mbps,
pings
will either timeout or give 50-500ms range. (have grid mounted with
wide part being horizontal and device with narrow part vertical,
as per
user guide instructions.) Do I have 2 airgrids out of the box that
are
defective, or do I need to rotate the arrays to get a good connection?
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
