Re: [Ubnt_users] Firmware Releases

Jesse DuPont Tue, 20 Dec 2016 12:03:42 -0800

For those of you who have responded with your experience with v6/v8, would you mind replying again, but also indicating how your SMs are configured (bridged, NAT, routed, etc.). Our experience has been good with 6.0/8.0, all our SMs are bridged. Particularly, those who had to truck-roll to go load older firmware, how are your SM's configured?

Thanks!

Jesse DuPont

Network Architect
email: [email protected]
Celerity Networks LLC

Celerity Broadband LLC
Like us! facebook.com/celeritynetworksllc

Like us! facebook.com/celeritybroadband

On 12/20/16 11:00 AM, RickG wrote:

I had the disconnects/sleep issue up to 5.6.9. Downgraded all the way back to 5.6.5 :(

On Tue, Dec 20, 2016 at 10:43 AM, Kevin Lamothe <[email protected]> wrote:

My experiences so far:

8.0 is stable

6.0 is stable running on 5GHz only. 2.4GHz and 900MHz AP/cpes will
randomly disconnect or goto sleep. Downgrading it back to 5.6.9 fixed it
for us.

Ubiquiti is reviewing some support files I sent em.

On 12/20/2016 10:09, Rory Conaway wrote:
>
> We started deploying RC3 and ran into major issues. Our phones
> exploded with complaint of disconnection and slow service. It took us
> days to put beta 15 and 19 back on and a lot of visits to houses that
> wouldn’t reconnect. I’ll wait until it’s been out for a little while.
>
> Rory
>
> *From:*ubnt_users-bounces@wispa.org
> [mailto:ubnt_users-bounces@wispa.org] *On Behalf Of *Matthew Brendle
> *Sent:* Tuesday, December 20, 2016 7:35 AM
> *To:* 'Ubiquiti Users Group'
> *Subject:* Re: [Ubnt_users] Firmware Releases
>
> I see where they have made some DHCP improvements. Anyone test them
> yet. In the past 8.0 betas I saw DHCP would pull an address from
> tower, but if I clicked on renew it would hang up and DHCPc would stop
> on WLAN.
>
> *From:*ubnt_users-bounces@wispa.org
> <mailto:ubnt_users-bounces@wispa.org>
> [mailto:ubnt_users-bounces@wispa.org] *On Behalf Of *J Portman
> *Sent:* Tuesday, December 20, 2016 11:09 PM
> *To:* Ubiquiti Users Group <[email protected]
> <mailto:[email protected]>>
> *Subject:* Re: [Ubnt_users] Firmware Releases
>
> We've been running 8beta and 6beta for months. Using Rocket-AC Prisms
> as AP with M series clients.
> Very fast, very stable.
>
> JP
> *On Tue, 20 Dec 2016 09:23:25 -0500, Matthew Brendle wrote*
> > So I see that 8.0 and 6.0 have been released in Final version. Are
> they replacing the 5.x and 7.x versions?
> >
> > Matt
> > --
> > This message has been scanned for viruses and dangerous content by
> > *E.F.A. Project* <http://www.efa-project.org/>, and is believed to
> be clean.
>
>
> Joe Portman
> Alamo Broadband Inc.
> www.alamobroadband.com <http://www.alamobroadband.com/>

>
>
>
> _______________________________________________
> Ubnt_users mailing list
> [email protected]
> http://lists.wispa.org/mailman/listinfo/ubnt_users

_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users

--

-RickG KyWiFi
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users

_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Firmware Releases

Reply via email to