STP is default I think... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Jan 25, 2017 7:18 PM, "James Wilson" <[email protected]> wrote: > We didn't have STP enabled on any of the ports. This is strange - these > devices have been working together for a year. > > It's been stable for several minutes now that I turned off loop protection. > > Don't see how I could get a loop in one device. ??? > > Thank for coming to the rescue! :) > > On Wed, Jan 25, 2017 at 7:15 PM, James Wilson <[email protected]> > wrote: > >> I just did some Google searches and turned off Loop Protection in the >> Devices/Configuration page. So far ok... >> >> On Wed, Jan 25, 2017 at 7:12 PM, Josh Luthman < >> [email protected]> wrote: >> >>> If you DEFINITELY don't have a bridge loop (like two backhauls going to >>> this tower, both of which go to the same collision domain) you can disable >>> port 2 from the STP. >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 <(937)%20552-2340> >>> Direct: 937-552-2343 <(937)%20552-2343> >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Wed, Jan 25, 2017 at 7:09 PM, James Wilson <[email protected]> >>> wrote: >>> >>>> I have a very straightforward flat network, no OSPF, etc. >>>> >>>> Tonight I started losing connection and traced it back to a Netonix >>>> switch. The connection is up for a minute then the Netonix switch turns off >>>> the AF5X's port. >>>> >>>> Below is what it's log is saying. I don't understand how the AF 5X >>>> that's connected to the port can cause a loop. Help! Thanks! :) >>>> >>>> >>>> Jan 25 17:39:37 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> Jan 25 17:42:39 Loop protection: re-enabling port 2 >>>> >>>> Jan 25 17:43:38 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> Jan 25 17:46:40 Loop protection: re-enabling port 2 >>>> >>>> Jan 25 18:03:04 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> Jan 25 18:06:05 Loop protection: re-enabling port 2 >>>> >>>> Jan 25 18:06:39 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> Jan 25 18:09:40 Loop protection: re-enabling port 2 >>>> >>>> Jan 25 18:15:17 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> Jan 25 18:18:18 Loop protection: re-enabling port 2 >>>> >>>> Jan 25 18:22:19 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> Jan 25 18:25:21 Loop protection: re-enabling port 2 >>>> >>>> Jan 25 18:25:38 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> Jan 25 18:28:40 Loop protection: re-enabling port 2 >>>> >>>> Jan 25 18:34:13 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> Jan 25 18:37:14 Loop protection: re-enabling port 2 >>>> >>>> Jan 25 18:37:22 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> Jan 25 18:40:24 Loop protection: re-enabling port 2 >>>> >>>> Jan 25 18:41:37 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> Jan 25 18:44:39 Loop protection: re-enabling port 2 >>>> >>>> Jan 25 18:45:37 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> Jan 25 18:48:39 Loop protection: re-enabling port 2 >>>> >>>> Jan 25 18:49:33 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> Jan 25 18:52:35 Loop protection: re-enabling port 2 >>>> >>>> Jan 25 18:53:39 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> Jan 25 18:56:41 Loop protection: re-enabling port 2 >>>> >>>> Jan 25 18:58:36 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> Jan 25 19:00:36 UI: Configuration changed by admin (172.19.3.6) >>>> >>>> Jan 25 19:00:36 UI: Port 2 STP: changed from 'Disabled' to 'Enabled' >>>> >>>> Jan 25 19:01:38 Loop protection: re-enabling port 2 >>>> >>>> Jan 25 19:02:38 Loop protection: detected loop from port 2 to port 2, >>>> disabling port 2 for 180 seconds >>>> >>>> _______________________________________________ >>>> Ubnt_users mailing list >>>> [email protected] >>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>> >>>> >>> >>> _______________________________________________ >>> Ubnt_users mailing list >>> [email protected] >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> >> > > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > >
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
