99.86% sure it's paranoia, but I'd like to know what Mr. WILSON ( sorry I was channeling my inner Dennis ) thinks the customer was setting up.
On Thu, January 26, 2017 12:53 am, RickG wrote: > Ya know, I've always suspected UBNT CPE leaks or am I just paranoid? > > > On Wed, Jan 25, 2017 at 9:41 PM, James Wilson <[email protected]> > wrote: > > >> Looks like a customer with a static public IP was setting up something. >> Even though he is on a routed port of a switch (our CPEs are routed) >> something he did somehow caused a loop. >> >> On Jan 25, 2017 9:04 PM, "Eric Tykwinski" <[email protected]> >> wrote: >> >> >>> I just tested STP on my little home AirRouter running v6. Running >>> RSTP >>> on the Cisco and bridged on the AirRouter with STP enabled, it never >>> went to blocked on either port. I think there might be a bug in v6 >>> for STP. Weird part was switch was still saying rstp, and I think >>> AirOS only >>> supports STP. I might dig a bit further later on… >>> >>> >>> On Jan 25, 2017, at 7:33 PM, Chris Soiles <[email protected]> >>> wrote: >>> >>> >>> Could be some kind of crosstalk and thinking it's a loop >>> >>> >>> I usually turn off STP unless I know there is multipath in that >>> segment >>> >>> Sent from iPhone 6S Plus >>> >>> >>> Chris Soiles >>> Owner >>> Rio Cities >>> [email protected] 505-966-6389 >>> >>> >>> On Jan 25, 2017, at 5:18 PM, James Wilson <[email protected]> >>> wrote: >>> >>> >>> We didn't have STP enabled on any of the ports. This is strange - >>> these devices have been working together for a year. >>> >>> It's been stable for several minutes now that I turned off loop >>> protection. >>> >>> Don't see how I could get a loop in one device. ??? >>> >>> >>> Thank for coming to the rescue! :) >>> >>> >>> On Wed, Jan 25, 2017 at 7:15 PM, James Wilson <[email protected]> >>> wrote: >>> >>> >>>> I just did some Google searches and turned off Loop Protection in >>>> the Devices/Configuration page. So far ok... >>>> >>>> >>>> On Wed, Jan 25, 2017 at 7:12 PM, Josh Luthman < >>>> [email protected]> wrote: >>>> >>>>> If you DEFINITELY don't have a bridge loop (like two backhauls >>>>> going to this tower, both of which go to the same collision >>>>> domain) you can disable port 2 from the STP. >>>>> >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 <(937)%20552-2340> >>>>> Direct: 937-552-2343 <(937)%20552-2343> >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>>> >>>>> On Wed, Jan 25, 2017 at 7:09 PM, James Wilson >>>>> <[email protected]> >>>>> wrote: >>>>> >>>>> >>>>>> I have a very straightforward flat network, no OSPF, etc. >>>>>> >>>>>> >>>>>> Tonight I started losing connection and traced it back to a >>>>>> Netonix >>>>>> switch. The connection is up for a minute then the Netonix >>>>>> switch turns off the AF5X's port. >>>>>> >>>>>> Below is what it's log is saying. I don't understand how the >>>>>> AF 5X >>>>>> that's connected to the port can cause a loop. Help! Thanks! >>>>>> :) >>>>>> >>>>>> >>>>>> >>>>>> Jan 25 17:39:37 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds Jan 25 17:42:39 Loop >>>>>> protection: re-enabling port 2 >>>>>> Jan 25 17:43:38 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds Jan 25 17:46:40 Loop >>>>>> protection: re-enabling port 2 >>>>>> Jan 25 18:03:04 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds Jan 25 18:06:05 Loop >>>>>> protection: re-enabling port 2 >>>>>> Jan 25 18:06:39 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds Jan 25 18:09:40 Loop >>>>>> protection: re-enabling port 2 >>>>>> Jan 25 18:15:17 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds Jan 25 18:18:18 Loop >>>>>> protection: re-enabling port 2 >>>>>> Jan 25 18:22:19 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds Jan 25 18:25:21 Loop >>>>>> protection: re-enabling port 2 >>>>>> Jan 25 18:25:38 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds Jan 25 18:28:40 Loop >>>>>> protection: re-enabling port 2 >>>>>> Jan 25 18:34:13 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds Jan 25 18:37:14 Loop >>>>>> protection: re-enabling port 2 >>>>>> Jan 25 18:37:22 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds Jan 25 18:40:24 Loop >>>>>> protection: re-enabling port 2 >>>>>> Jan 25 18:41:37 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds Jan 25 18:44:39 Loop >>>>>> protection: re-enabling port 2 >>>>>> Jan 25 18:45:37 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds Jan 25 18:48:39 Loop >>>>>> protection: re-enabling port 2 >>>>>> Jan 25 18:49:33 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds Jan 25 18:52:35 Loop >>>>>> protection: re-enabling port 2 >>>>>> Jan 25 18:53:39 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds Jan 25 18:56:41 Loop >>>>>> protection: re-enabling port 2 >>>>>> Jan 25 18:58:36 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds Jan 25 19:00:36 UI: >>>>>> Configuration changed by admin (172.19.3.6) >>>>>> Jan 25 19:00:36 UI: Port 2 STP: changed from 'Disabled' to >>>>>> 'Enabled' >>>>>> Jan 25 19:01:38 Loop protection: re-enabling port 2 >>>>>> Jan 25 19:02:38 Loop protection: detected loop from port 2 to >>>>>> port 2, disabling port 2 for 180 seconds >>>>>> >>>>>> _______________________________________________ >>>>>> Ubnt_users mailing list >>>>>> [email protected] >>>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>>> >>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> Ubnt_users mailing list >>>>> [email protected] >>>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>>>> >>>>> >>>>> >>>> >>> _______________________________________________ >>> Ubnt_users mailing list >>> [email protected] >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> >>> _______________________________________________ >>> Ubnt_users mailing list >>> [email protected] >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> >>> >>> >>> _______________________________________________ >>> Ubnt_users mailing list >>> [email protected] >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> >>> >> _______________________________________________ >> Ubnt_users mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> > > > -- > -RickG KyWiFi > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users > > _______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
