Sort of does on Airfiber links, but you still need to manually adjust.
-------------------------------- Tommy A. Digitex.com 817.558.6230 V 817.558.1204 F > On Jan 30, 2017, at 9:44 PM, Shawn C. Peppers > <[email protected]> wrote: > > It does this on v6.0 in ptp mode > > Shawn C. Peppers > Video Direct Satellite & Entertainment > 866-680-8433 Toll Free > 480-287-9960 Fax > http://www.video-direct.tv > >> On Jan 30, 2017, at 8:56 PM, Tommy Adams <[email protected]> wrote: >> >> EPMP backs off the transmit on the SM automatically. UBNT needs to get on >> the ball with this feature. >> >> >> -------------------------------- >> Tommy A. >> Digitex.com >> >> 817.558.6230 V >> 817.558.1204 F >> >>> On Jan 30, 2017, at 6:20 PM, Jan-OOLLC <[email protected]> wrote: >>> >>> Update, trying to balance the Rx dbm's at the AP first, by decreasing >>> transmit power at the CPE. Noticed that one of the trouble CPEs was >>> connecting to another tower with same name SSID even the the signal was 10 >>> dbm weaker. So I figured if all the CPEs were configured to lock to the AP >>> mac, they would transfer over to a new name for SSID. Ended up doing a lot >>> of driving for orphans. Not one of them accepted the new name, all were >>> set to "lock to AP" mac. I'm pretty sure with older firmware this used to >>> work, is this a bug? >>> Have tried airControl2 in the past, could not figure out how to add new >>> CPEs after initial install. Dude is much easier to use. >>> Jan >>> >>>> On 01/30/2017 12:03 PM, Nick Bright wrote: >>>>> On 1/28/2017 11:43 AM, Chris Soiles wrote: >>>>> I have replaced APs and just named them the same with same security and >>>>> they just connect >>>>> >>>>> I.E.: had rocket with Omni named SSID: radio WPA2: 1234 >>>>> >>>>> Added a new section, installed 4 APs at New top, named all APs SSID: >>>>> radio same WPA2 >>>>> >>>>> Turned off Omni AP >>>>> >>>>> As each CPE connected to new AP >>>>> Login to CPE change SSID to New name for the radio >>>>> >>>>> Once all CPEs gone, change name of AP to New name, they all reconnect >>>> That's what I do too. If things are working well, you could also use >>>> airControl2 to do it by batch, but you need to ensure that all the CPE >>>> have reliable connections and are responding properly first, or they'll >>>> get orphaned. >>>> >>>> -- >>>> ----------------------------------------------- >>>> - Nick Bright - >>>> - Vice President of Technology - >>>> - Valnet -=- We Connect You -=- - >>>> - Tel 888-332-1616 x 315 / Fax 620-331-0789 - >>>> - Web http://www.valnet.net/ - >>>> ----------------------------------------------- >>>> - Are your files safe? - >>>> - Valnet Vault - Secure Cloud Backup - >>>> - More information & 30 day free trial at - >>>> - http://www.valnet.net/services/valnet-vault - >>>> ----------------------------------------------- >>>> >>>> This email message and any attachments are intended solely for the use of >>>> the addressees hereof. This message and any attachments may contain >>>> information that is confidential, privileged and exempt from disclosure >>>> under applicable law. If you are not the intended recipient of this >>>> message, you are prohibited from reading, disclosing, reproducing, >>>> distributing, disseminating or otherwise using this transmission. If you >>>> have received this message in error, please promptly notify the sender by >>>> reply E-mail and immediately delete this message from your system. >>>> >>>> >>>> _______________________________________________ >>>> Ubnt_users mailing list >>>> [email protected] >>>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> _______________________________________________ >>> Ubnt_users mailing list >>> [email protected] >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >> _______________________________________________ >> Ubnt_users mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/ubnt_users > _______________________________________________ > Ubnt_users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
