Is there any idea when these products will be available? Streakwave is out of everything and even Amazon doesn't have the NB19 ac's.
Rory From: [email protected] [mailto:[email protected]] On Behalf Of David Kunat Sent: Tuesday, March 14, 2017 12:56 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Odd noise floor problem They R2AC in closed beta according to the forums and there was a FCC license with pictures a few months ago. On Mar 13, 2017, at 9:01 PM, Chris J. Ruschmann <[email protected]<mailto:[email protected]>> wrote: Rocket 2 AC? From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Jesse DuPont Sent: Monday, March 13, 2017 11:38 AM To: Ubiquiti Users Group <[email protected]<mailto:[email protected]>> Subject: Re: [Ubnt_users] Odd noise floor problem This is purely anecdotal, but I have noticed declined performance on M2 (specifically, Rocket M2s in my case) where noise floor seems higher, CCQ seems lower and customers report decreased download, but upload is fine for them ( we offer 8 Mbps upload and they can almost always get it). All our radios are on 5.6.9 or 6.0, both versions seem to have this issue. I had been chalking it up to increased interference because we've not had an A/B comparison like you've described (replacing the one with the other), but perhaps it's more than that. I'm getting ready to swap one of the M2s with a Rocket 2AC in mixed mode to see if things are any better. Jesse DuPont Network Architect email: [email protected]<mailto:[email protected]> Celerity Networks LLC Celerity Broadband LLC Like us! facebook.com/celeritynetworksllc<http://facebook.com/celeritynetworksllc> Like us! facebook.com/celeritybroadband<http://facebook.com/celeritybroadband> [cid:[email protected]] On 3/13/17 11:30 AM, Nick Bright wrote: Greetings, In several locations, I've replaced Mikrotik AP units with BulletM2 units; to enable AirMAX. This went quite well early in 2016 and the strategy was successful in improving performance at several locations, thanks to enabling TDMA. We converted several sites in early 2017, and almost all of them have been exhibiting symptoms of very poor performance, and awful noise floors. So for example, we would replace an RB433+XR2 with an BulletM2, using the same cables and antenna. The XR2 would be reporting a noise floor in the 'normal' range for us (around -95 to -100dBm). Then the replacement bullet would suddenly be reporting noise floors of -80dBm to -85dBm! Performance suffered along with the severe drop in SNR. Is this possibly a bad batch of radios or something along those lines? I bought them all from the same vendor at the same time. All units, both AP and SM, are running AirOS 5.6.9. Thoughts? _______________________________________________ Ubnt_users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________ Ubnt_users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/ubnt_users
