I have heard March 27?????
On 03/14/2017 07:38 AM, Rory Conaway wrote:
Is there any idea when these products will be available? Streakwave is
out of everything and even Amazon doesn’t have the NB19 ac’s.
Rory
*From:*[email protected]
[mailto:[email protected]] *On Behalf Of *David Kunat
*Sent:* Tuesday, March 14, 2017 12:56 AM
*To:* Ubiquiti Users Group
*Subject:* Re: [Ubnt_users] Odd noise floor problem
They R2AC in closed beta according to the forums and there was a FCC
license with pictures a few months ago.
On Mar 13, 2017, at 9:01 PM, Chris J. Ruschmann <[email protected]
<mailto:[email protected]>> wrote:
Rocket 2 AC?
*From:*[email protected]
<mailto:[email protected]>
[mailto:[email protected]] *On Behalf Of *Jesse DuPont
*Sent:* Monday, March 13, 2017 11:38 AM
*To:* Ubiquiti Users Group <[email protected]
<mailto:[email protected]>>
*Subject:* Re: [Ubnt_users] Odd noise floor problem
This is purely anecdotal, but I have noticed declined performance
on M2 (specifically, Rocket M2s in my case) where noise floor
seems higher, CCQ seems lower and customers report decreased
download, but upload is fine for them ( we offer 8 Mbps upload and
they can almost always get it). All our radios are on 5.6.9 or
6.0, both versions seem to have this issue. I had been chalking it
up to increased interference because we've not had an A/B
comparison like you've described (replacing the one with the
other), but perhaps it's more than that. I'm getting ready to swap
one of the M2s with a Rocket 2AC in mixed mode to see if things
are any better.
*_Jesse DuPont_*
Network Architect
email: [email protected]
<mailto:[email protected]>
Celerity Networks LLC
Celerity Broadband LLC
Like us! facebook.com/celeritynetworksllc
<http://facebook.com/celeritynetworksllc>
Like us! facebook.com/celeritybroadband
<http://facebook.com/celeritybroadband>
On 3/13/17 11:30 AM, Nick Bright wrote:
Greetings,
In several locations, I've replaced Mikrotik AP units with BulletM2
units; to enable AirMAX.
This went quite well early in 2016 and the strategy was successful in
improving performance at several locations, thanks to enabling TDMA.
We converted several sites in early 2017, and almost all of them have
been exhibiting symptoms of very poor performance, and awful noise
floors.
So for example, we would replace an RB433+XR2 with an BulletM2, using
the same cables and antenna. The XR2 would be reporting a noise floor in
the 'normal' range for us (around -95 to -100dBm). Then the replacement
bullet would suddenly be reporting noise floors of -80dBm to -85dBm!
Performance suffered along with the severe drop in SNR.
Is this possibly a bad batch of radios or something along those lines? I
bought them all from the same vendor at the same time.
All units, both AP and SM, are running AirOS 5.6.9.
Thoughts?
_______________________________________________
Ubnt_users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/ubnt_users
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
--
Mitch Koep
A Better Wireless
218-851-8689 cell
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
