I wish there was more transparency in the release notes. I know
they're protecting their intellectual property, but it's difficult
for us to make a decision about a release's improvements and
relevance to our network when the heading of "stability improvement"
clearly involves significant, sometimes numerous, changes to
underlying RF performance and processes.
Jesse DuPont
Network
Architect
email: [email protected]
Celerity Networks LLC
Celerity
Broadband LLC
Like us! facebook.com/celeritynetworksllc
Like us! facebook.com/celeritybroadband
![]()
On 4/14/17 10:28 AM, Nick Bright wrote:
On 4/5/2017 1:20 PM, James Craig via
Ubnt_users wrote:
Thanks for the additional reports guys. I have
forwarded to the devs for review.
If experiencing any trouble/reduced performance when
upgrading to 6.0.3, please grab the AP and STA support
file(before reboot/downgrade) and let me know.
I tested 6.0.3 on a few sites, and noticed that in a significant
number of cases, there were significant reductions in RX signal at
the client side.
The odd thing is, that rolling back the CLIENT side firmware
improved the RECEIVE signal at the client (e.g. it doesn't seem to
be a TX power problem at the AP).
Tested on a RocketM2 and BulletM2 AP, across various mostly XM
clients, some XW clients. Mostly single phase (airgrids, bullets).
Clients with -60 or so would go to around -65, clients around -65
would go to -72 or so, and clients with a -75 would drop to
-90dBm.
--
-----------------------------------------------
- Nick Bright -
- Vice President of Technology -
- Valnet -=- We Connect You -=- -
- Tel 888-332-1616 x 315 / Fax 620-331-0789 -
- Web http://www.valnet.net/ -
-----------------------------------------------
- Are your files safe? -
- Valnet Vault - Secure Cloud Backup -
- More information & 30 day free trial at -
- http://www.valnet.net/services/valnet-vault -
-----------------------------------------------
This email message and any attachments are intended solely for the use of the addressees hereof. This message and any attachments may contain information that is confidential, privileged and exempt from disclosure under applicable law. If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system.
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
|
_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users
