Re: [Ubnt_users] 6.07 upgrade problem

Roy Tue, 10 Oct 2017 12:31:11 -0700

There isn't any UNII button but since it worked on 5.7 Ghz before, it should work now.   When I reboot the radio, it scans for the AP and stops scanning on 5.7Ghz. The AP shows up on the Site Survey so it has no problem with that channel.

The security key is unchanged. If it was a key problem, wouldn't the log have entries showing authentication problems. All the log on the station shows

wireless: ath0     Set Mode:Managed
wireless: ath0     Set Mode:Managed
wireless: ath0     Set Frequency:5.7 GHz (Channel 140)
wireless: ath0     Set Mode:Managed
wireless: ath0     Set Frequency:5.7 GHz (Channel 140)

On 10/10/2017 11:57 AM, Chris Soiles wrote:

Make sure it’s UNII activates

Check the WPA security key

Sent from iPhone 6S Plus

Chris Soiles

Owner

Rio Cities

[email protected]

505-966-6389

On Oct 10, 2017, at 12:55 PM, Josh Luthman <[email protected]> wrote:

Oh if another station works you know it's a station problem. It wouldn't tx until it's associated.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Oct 10, 2017 11:48 AM, "Roy" <[email protected]> wrote:

The AP is definitely sending because it shows up in the site survey and another station is connected to it. Is there a way to check if the XM 6.0.7 Station is transmitting?

On 10/10/2017 11:18 AM, Josh Luthman wrote:

I'd check to see if your AP is actually transmitting.

Also check if 5700 is in the scan list.

Being DFS and Ubnt things get really confusing as to what's supported.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Oct 10, 2017 11:15 AM, "Roy" <[email protected] <mailto:[email protected]>> wrote:

The AP radio is set for 5.700 Ghz with 40Mhz width.

The Station is a Nanobridge and the AP is a Nanostation. Link
distance is probably 100 yards across some parking lots. Power
is -8dbm

The station radio does see the AP as expected. One other station
running XM 6.0.1 is connected to the AP.

I haven't tried a power cycle but I have rebooted several times

On 10/10/2017 11:00 AM, Josh Luthman wrote:

What frequency? That's my only guess.

Josh Luthman
Office: 937-552-2340 <tel:%28937%29%20552-2340>
Direct: 937-552-2343 <tel:%28937%29%20552-2343>
1100 Wayne St
<https://maps.google.com/?q=1100+Wayne+St+%0D+Suite+1337+%0D+Troy,+OH+45373&entry=gmail&source=g>
Suite 1337
Troy, OH 45373

On Tue, Oct 10, 2017 at 1:55 PM, Roy <[email protected]
<mailto:[email protected]>> wrote:

Hi,

I have an XM 6.0.1 station connected to an XM 6.0.1 AP

I upgraded the station to 6.07 and now they won't talk to
each other.
No errors in either log

Any ideas?

I guess I will try going back to the signed copy of 6.04
_______________________________________________
Ubnt_users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>

_______________________________________________
Ubnt_users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>

_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users

_______________________________________________
Ubnt_users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] 6.07 upgrade problem

Reply via email to