I'm seeing similar problems in 8.10. dmesg -nnv shows:
03:02.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g
Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:12f8]
Flags: bus master, fast devsel, latency 64, IRQ 21
Memory at b0204000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
I'm attaching dmesg on a fresh boot.
The card was working fine prior to upgrading to 8.10 from 7.10. Since
then, I have very rarely been able to see any networks with iwlist
(worked once), and haven't been able to connect to any networks at all.
I tried using the b43legacy module instead of b43, which prevented eth1
from even showing up. I tried using the SPROM fix provided by Larry,
changing "SPROM(0x72, Low 16 bits of Boardflags) = 0x3A49" to
"SPROM(0x72, Low 16 bits of Boardflags) = 0x3A48", to no avail.
Thanks,
-Kyle
** Attachment added: "dmesg output"
http://launchpadlibrarian.net/19673028/dmesg.txt
--
bcm4306, bcm4309, bcm4311, bcm4312 with b43 : Authentication with AP doesn't
work.
https://bugs.launchpad.net/bugs/182716
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
