Hi all, Leann Ogasawara Is there possibility of some of the problem might be due to the libata driver
http://ata.wiki.kernel.org/index.php/Software_status [quote] PATA support libata is not specific to Serial ATA. It works for Parallel ATA (a.k.a. IDE) as well. Certain SATA controllers such as Promise and SiS include PATA ports on their SATA controllers. libata has gained full support for PATA, including older chipsets and devices with buggy/problematic designs. Alan Cox has done a lot of work on this. PATA is be fully supported, alongside SATA. libata PATA drivers exist for almost all PATA chipsets. libata PATA drivers will not be turned on by default for a long time, to avoid conflicts with CONFIG_IDE (the traditional IDE driver). [/quote] I got this while I was trying $ sudo hdparm -c1 /dev/sda /dev/sda: setting 32-bit IO_support flag to 1 HDIO_SET_32BIT failed: Invalid argument IO_support = 0 (default) This is how my drive stacks up . This is a seagate 160 GiB $ sudo hdparm -i /dev/sda [sudo] password for shirish: /dev/sda: Model=ST3160021A , FwRev=8.01 , SerialNo=4JS26D4P Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=?16? CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=312581808 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=no WriteCache=enabled Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: ATA/ATAPI-1,2,3,4,5,6 * signifies the current active mode -- poor performance hard disk IDE https://bugs.launchpad.net/bugs/96693 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
