no problem: heres the output for you:
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-9-generic (bui...@rothera) (gcc version
4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008 (Ubuntu
2.6.27-9.19-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to fff0000 @ 7000-d000
[ 0.000000] RAMDISK: 0f80a000 - 0ffdf41a
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP 000F7970, 0014 (r0 VIA694)
[ 0.000000] ACPI: RSDT 0FFF3000, 0028 (r1 VIA694 AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: FACP 0FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: DSDT 0FFF30C0, 2D7D (r1 VIA694 AWRDACPI 1000 MSFT
100000C)
[ 0.000000] ACPI: FACS 0FFF0000, 0040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0fff0000
[ 0.000000] low ram: 00000000 - 0fff0000
[ 0.000000] bootmap 00002000 - 00004000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000
- 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000
- 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000
- 00005c0a20]
[ 0.000000] #4 [000f80a000 - 000ffdf41a] RAMDISK ==> [000f80a000
- 000ffdf41a]
[ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000
- 00005c4000]
[ 0.000000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000
- 0000100000]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000
- 0000009000]
[ 0.000000] #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000
- 0000004000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000fff0
[ 0.000000] HighMem 0x0000fff0 -> 0x0000fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0000fff0
[ 0.000000] On node 0 totalpages: 65424
[ 0.000000] free_area_init_node: node 0, pgdat c048a580, node_mem_map
c1000000
[ 0.000000] DMA zone: 3964 pages, LIFO batch:0
[ 0.000000] Normal zone: 60884 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (01241000)
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
10000000:efff0000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 64848
[ 0.000000] Kernel command line:
root=UUID=118fce2d-50a7-485d-b7f9-868e81eb5474 ro splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 1202.703 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.004000] Memory: 246084k/262080k available (2572k kernel code, 15504k
reserved, 1160k data, 424k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xd0800000 - 0xff3fe000 ( 747 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038335a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038335a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.004021] Calibrating delay loop (skipped), value calculated using timer
frequency.. 2405.40 BogoMIPS (lpj=4810812)
[ 0.004172] Security Framework initialized
[ 0.004239] SELinux: Disabled at boot.
[ 0.004360] AppArmor: AppArmor initialized
[ 0.004427] Mount-cache hash table entries: 512
[ 0.004808] Initializing cgroup subsys ns
[ 0.004869] Initializing cgroup subsys cpuacct
[ 0.004925] Initializing cgroup subsys memory
[ 0.005005] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.005069] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.005152] Checking 'hlt' instruction... OK.
[ 0.020139] SMP alternatives: switching to UP code
[ 0.028064] Freeing SMP alternatives: 11k freed
[ 0.028133] ACPI: Core revision 20080609
[ 0.030419] ACPI: Checking initramfs for custom DSDT
[ 0.603890] ACPI: setting ELCR to 0020 (from 1c20)
[ 0.605545] weird, boot CPU (#0) not listedby the BIOS.
[ 0.605606] SMP motherboard not detected.
[ 0.605663] Local APIC not detected. Using dummy APIC emulation.
[ 0.605721] SMP disabled
[ 0.605936] Brought up 1 CPUs
[ 0.605990] Total of 1 processors activated (2405.40 BogoMIPS).
[ 0.606071] CPU0 attaching sched-domain:
[ 0.606078] domain 0: span 0 level CPU
[ 0.606084] groups: 0
[ 0.606646] net_namespace: 840 bytes
[ 0.606717] Booting paravirtualized kernel on bare hardware
[ 0.607132] Time: 15:36:30 Date: 12/29/08
[ 0.607256] NET: Registered protocol family 16
[ 0.608140] EISA bus registered
[ 0.608224] ACPI: bus type pci registered
[ 0.641186] PCI: PCI BIOS revision 2.10 entry at 0xfb3f0, last bus=1
[ 0.641247] PCI: Using configuration type 1 for base access
[ 0.644256] ACPI: EC: Look up EC in DSDT
[ 0.652082] ACPI: Interpreter enabled
[ 0.652148] ACPI: (supports S0 S1 S4 S5)
[ 0.652371] ACPI: Using PIC for interrupt routing
[ 0.661316] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.661535] PCI: 0000:00:00.0 reg 10 32bit mmio: [d0000000, d3ffffff]
[ 0.661576] pci 0000:00:00.0: Disabling VIA memory write queue (PCI ID 0305,
rev 03): [55] 89 & 1f -> 09
[ 0.661691] pci 0000:00:01.0: supports D1
[ 0.661797] PCI: 0000:00:07.1 reg 20 io port: [a000, a00f]
[ 0.661860] PCI: 0000:00:07.2 reg 20 io port: [a400, a41f]
[ 0.661919] PCI: 0000:00:07.3 reg 20 io port: [a800, a81f]
[ 0.662003] pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686
HW-mon
[ 0.662072] pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB
[ 0.662170] PCI: 0000:00:09.0 reg 10 io port: [ac00, ac1f]
[ 0.662206] pci 0000:00:09.0: supports D1
[ 0.662210] pci 0000:00:09.0: supports D2
[ 0.662236] PCI: 0000:00:09.1 reg 10 io port: [b000, b007]
[ 0.662272] pci 0000:00:09.1: supports D1
[ 0.662275] pci 0000:00:09.1: supports D2
[ 0.662303] PCI: 0000:00:0d.0 reg 10 io port: [b800, b87f]
[ 0.662311] PCI: 0000:00:0d.0 reg 14 32bit mmio: [db001000, db00107f]
[ 0.662335] PCI: 0000:00:0d.0 reg 30 32bit mmio: [0, 3ffff]
[ 0.662367] PCI: 0000:00:0e.0 reg 10 io port: [bc00, bc07]
[ 0.662376] PCI: 0000:00:0e.0 reg 14 io port: [c000, c003]
[ 0.662384] PCI: 0000:00:0e.0 reg 18 io port: [c400, c407]
[ 0.662392] PCI: 0000:00:0e.0 reg 1c io port: [c800, c803]
[ 0.662400] PCI: 0000:00:0e.0 reg 20 io port: [cc00, ccff]
[ 0.662412] PCI: 0000:00:0e.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.662487] PCI: 0000:01:00.0 reg 10 32bit mmio: [d4000000, d7ffffff]
[ 0.662496] PCI: 0000:01:00.0 reg 14 io port: [9000, 90ff]
[ 0.662506] PCI: 0000:01:00.0 reg 18 32bit mmio: [d9000000, d9003fff]
[ 0.662528] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.662548] pci 0000:01:00.0: supports D1
[ 0.662583] PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
[ 0.662589] PCI: bridge 0000:00:01.0 32bit mmio: [d8000000, d9ffffff]
[ 0.662597] PCI: bridge 0000:00:01.0 32bit mmio pref: [d4000000, d7ffffff]
[ 0.662606] bus 00 -> node 0
[ 0.662619] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.693676] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 *12 14
15)
[ 0.694549] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14
15)
[ 0.695373] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[ 0.696347] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14
15)
[ 0.697180] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.697315] pnp: PnP ACPI init
[ 0.697383] ACPI: bus type pnp registered
[ 0.703709] pnp: PnP ACPI: found 12 devices
[ 0.703775] ACPI: ACPI bus type pnp unregistered
[ 0.703835] PnPBIOS: Disabled by ACPI PNP
[ 0.704910] PCI: Using ACPI for IRQ routing
[ 0.705193] NET: Registered protocol family 8
[ 0.705193] NET: Registered protocol family 20
[ 0.705193] NetLabel: Initializing
[ 0.705193] NetLabel: domain hash size = 128
[ 0.705193] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.705193] NetLabel: unlabeled traffic allowed by default
[ 0.705193] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.705193] actual entries 65620
[ 0.705605] AppArmor: AppArmor Filesystem Enabled
[ 0.705720] system 00:00: iomem range 0xcb000-0xcbfff has been reserved
[ 0.705720] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.705720] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.705720] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.705720] system 00:00: iomem range 0xfff0000-0xfffffff could not be
reserved
[ 0.705720] system 00:00: iomem range 0xffff0000-0xffffffff could not be
reserved
[ 0.705720] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.705720] system 00:00: iomem range 0x100000-0xffeffff could not be
reserved
[ 0.705720] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.705720] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.743733] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.743797] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.743858] pci 0000:00:01.0: MEM window: 0xd8000000-0xd9ffffff
[ 0.743920] pci 0000:00:01.0: PREFETCH window:
0x000000d4000000-0x000000d7ffffff
[ 0.744008] pci 0000:00:01.0: setting latency timer to 64
[ 0.744015] bus: 00 index 0 io port: [0, ffff]
[ 0.744084] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.744140] bus: 01 index 0 io port: [9000, 9fff]
[ 0.744196] bus: 01 index 1 mmio: [d8000000, d9ffffff]
[ 0.744254] bus: 01 index 2 mmio: [d4000000, d7ffffff]
[ 0.744310] bus: 01 index 3 mmio: [0, 0]
[ 0.744386] NET: Registered protocol family 2
[ 0.744702] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.745200] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.745527] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.745839] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.745900] TCP reno registered
[ 0.746095] NET: Registered protocol family 1
[ 0.746413] checking if image is initramfs...<7>Switched to high resolution
mode on CPU 0
[ 1.313082] it is
[ 2.052990] Freeing initrd memory: 8021k freed
[ 2.054826] audit: initializing netlink socket (disabled)
[ 2.054922] type=2000 audit(1230564991.052:1): initialized
[ 2.065841] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.071479] VFS: Disk quotas dquot_6.5.1
[ 2.071770] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.072949] msgmni has been set to 496
[ 2.073364] io scheduler noop registered
[ 2.073422] io scheduler anticipatory registered
[ 2.073478] io scheduler deadline registered
[ 2.073558] io scheduler cfq registered (default)
[ 2.073645] pci 0000:00:00.0: Applying VIA southbridge workaround
[ 2.073711] PCI: VIA PCI bridge detected.Disabling DAC.
[ 2.074738] pci 0000:00:07.0: Disabling VIA external APIC routing
[ 2.074844] pci 0000:01:00.0: Boot video device
[ 2.075600] isapnp: Scanning for PnP cards...
[ 2.429820] isapnp: No Plug & Play device found
[ 2.526297] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.526608] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.527034] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.528679] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.529623] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.534071] brd: module loaded
[ 2.534325] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 2.534691] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.534754] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 2.535112] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.536501] mice: PS/2 mouse device common for all mice
[ 2.536966] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.537060] rtc0: alarms up to one year, y3k
[ 2.537427] EISA: Probing bus 0 at eisa.0
[ 2.537508] Cannot allocate resource for EISA slot 4
[ 2.537566] Cannot allocate resource for EISA slot 5
[ 2.537623] Cannot allocate resource for EISA slot 6
[ 2.537688] EISA: Detected 0 cards.
[ 2.537745] cpuidle: using governor ladder
[ 2.537800] cpuidle: using governor menu
[ 2.538898] TCP cubic registered
[ 2.539010] Using IPI No-Shortcut mode
[ 2.539666] registered taskstats version 1
[ 2.539925] Magic number: 4:389:640
[ 2.540405] rtc_cmos 00:04: setting system clock to 2008-12-29 15:36:31 UTC
(1230564991)
[ 2.540479] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.540548] EDD information not available.
[ 2.541696] Freeing unused kernel memory: 424k freed
[ 2.541869] Write protecting the kernel text: 2576k
[ 2.542008] Write protecting the kernel read-only data: 936k
[ 2.559882] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 2.938185] fuse init (API version 7.9)
[ 3.043948] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 3.044141] processor ACPI0007:00: registered as cooling_device0
[ 3.044150] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 4.084638] No dock devices found.
[ 4.308304] SCSI subsystem initialized
[ 4.376675] usbcore: registered new interface driver usbfs
[ 4.376741] usbcore: registered new interface driver hub
[ 4.392427] Linux Tulip driver version 1.1.15 (Feb 27, 2007)
[ 4.427953] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 4.427969] PCI: setting IRQ 10 as level-triggered
[ 4.427981] tulip 0000:00:0d.0: PCI INT A -> Link[LNKD] -> GSI 10 (level,
low) -> IRQ 10
[ 4.432103] tulip0: EEPROM default media type Autosense.
[ 4.432112] tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY
(1) block.
[ 4.438187] tulip0: MII transceiver #0 config 1000 status 782d advertising
01e1.
[ 4.438738] eth0: Digital DS21140 Tulip rev 34 at Port 0xb800,
00:80:c8:e2:92:df, IRQ 10.
[ 4.445788] usbcore: registered new device driver usb
[ 4.489406] USB Universal Host Controller Interface driver v3.0
[ 4.489557] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level,
low) -> IRQ 10
[ 4.489579] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 4.489693] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus
number 1
[ 4.489734] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000a400
[ 4.490136] usb usb1: configuration #1 chosen from 1 choice
[ 4.490195] hub 1-0:1.0: USB hub found
[ 4.490218] hub 1-0:1.0: 2 ports detected
[ 4.498736] libata version 3.00 loaded.
[ 4.696855] uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKD] -> GSI 10 (level,
low) -> IRQ 10
[ 4.696885] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 4.696936] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus
number 2
[ 4.696974] uhci_hcd 0000:00:07.3: irq 10, io base 0x0000a800
[ 4.697186] usb usb2: configuration #1 chosen from 1 choice
[ 4.697257] hub 2-0:1.0: USB hub found
[ 4.697280] hub 2-0:1.0: 2 ports detected
[ 4.808118] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 4.905807] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 4.905822] PCI: setting IRQ 11 as level-triggered
[ 4.905833] pata_hpt366 0000:00:0e.0: PCI INT A -> Link[LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 4.905847] pata_hpt366 0000:00:0e.0: PCI INT A disabled
[ 4.916904] pata_via 0000:00:07.1: version 0.3.3
[ 4.921589] scsi0 : pata_via
[ 4.928281] scsi1 : pata_via
[ 4.932583] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xa000 irq 14
[ 4.932591] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xa008 irq 15
[ 4.974195] usb 1-2: configuration #1 chosen from 1 choice
[ 5.096639] ata1.00: ATA-5: ST340016A, 3.05, max UDMA/100
[ 5.096652] ata1.00: 78165360 sectors, multi 16: LBA
[ 5.104684] ata1.00: configured for UDMA/100
[ 5.436948] ata2.00: ATAPI: LG DVD-ROM DRD-8160B, 1.00, max UDMA/33
[ 5.436985] ata2.01: ATAPI: LITE-ON LTR-40125S, ZS0J, max UDMA/33
[ 5.444687] ata2.00: configured for UDMA/33
[ 5.460551] ata2.01: configured for UDMA/33
[ 5.460881] scsi 0:0:0:0: Direct-Access ATA ST340016A 3.05
PQ: 0 ANSI: 5
[ 5.461631] scsi 1:0:0:0: CD-ROM LG DVD-ROM DRD8160B 1.00
PQ: 0 ANSI: 5
[ 5.467306] scsi 1:0:1:0: CD-ROM LITE-ON LTR-40125S ZS0J
PQ: 0 ANSI: 5
[ 5.467669] pata_hpt37x 0000:00:0e.0: PCI INT A -> Link[LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 5.467688] pata_hpt37x: BIOS has not set timing clocks.
[ 5.469812] pata_hpt37x: HPT370A using 33MHz bus clock.
[ 5.470104] scsi2 : pata_hpt37x
[ 5.479161] scsi3 : pata_hpt37x
[ 5.479316] ata3: PATA max UDMA/100 cmd 0xbc00 ctl 0xc000 bmdma 0xcc00 irq 11
[ 5.479324] ata4: PATA max UDMA/100 cmd 0xc400 ctl 0xc800 bmdma 0xcc08 irq 11
[ 6.174119] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.174215] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.174300] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 6.267252] usbcore: registered new interface driver hiddev
[ 6.287342] input: HID 1241:1111 as
/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0/input/input2
[ 6.292576] Driver 'sd' needs updating - please use bus_type methods
[ 6.294250] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[ 6.294299] sd 0:0:0:0: [sda] Write Protect is off
[ 6.294307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.294370] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.294554] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[ 6.294589] sd 0:0:0:0: [sda] Write Protect is off
[ 6.294595] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.294654] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 6.294666] sda:<6>input,hidraw0: USB HID v1.00 Mouse [HID 1241:1111] on
usb-0000:00:07.2-2
[ 6.296583] usbcore: registered new interface driver usbhid
[ 6.296592] usbhid: v2.6:USB HID core driver
[ 6.320503] sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type
methods
[ 6.344313] sda5 >
[ 6.344693] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.358082] sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
[ 6.358098] Uniform CD-ROM driver Revision: 3.20
[ 6.358335] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.409169] sr1: scsi3-mmc drive: 91x/48x writer cd/rw xa/form2 cdda tray
[ 6.409429] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 6.535814] Marking TSC unstable due to TSC halts in idle
[ 6.797279] PM: Starting manual resume from disk
[ 6.797293] PM: Resume from partition 8:5
[ 6.797297] PM: Checking hibernation image.
[ 6.797720] PM: Resume from disk failed.
[ 6.881099] kjournald starting. Commit interval 5 seconds
[ 6.881143] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.856914] udevd version 124 started
[ 13.208210] Linux agpgart interface v0.103
[ 13.273136] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[ 13.319851] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
[ 13.427655] parport_pc: VIA 686A/8231 detected
[ 13.427663] parport_pc: probing current configuration
[ 13.427686] parport_pc: Current parallel port base: 0x378
[ 13.427738] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 13.430215] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.491331] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.524380] parport_pc: VIA parallel port: io=0x378, irq=7
[ 13.856469] gameport: EMU10K1 is pci0000:00:09.1/gameport0, io 0xb000, speed
1242kHz
[ 14.167610] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 14.182822] ACPI: Power Button (FF) [PWRF]
[ 14.183131] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 14.192110] ACPI: Power Button (CM) [PWRB]
[ 14.331184] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 17.666168] EMU10K1_Audigy 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 11
(level, low) -> IRQ 11
[ 21.810863] lp0: using parport0 (interrupt-driven).
[ 22.245935] Adding 738948k swap on /dev/sda5. Priority:-1 extents:1
across:738948k
[ 22.932842] EXT3 FS on sda1, internal journal
[ 24.728211] type=1505 audit(1230565014.179:2): operation="profile_load"
name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3778
[ 24.729035] type=1505 audit(1230565014.179:3): operation="profile_load"
name="/usr/sbin/cupsd" name2="default" pid=3778
[ 24.951057] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.058170] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[ 25.058529] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase
use
[ 25.058535] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module
option or
[ 25.058540] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 25.257010] NET: Registered protocol family 10
[ 25.258092] lo: Disabled Privacy Extensions
[ 25.277833] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 27.085801] ACPI: WMI: Mapper loaded
[ 27.742168] powernow: No powernow capabilities detected
[ 29.236191] warning: `avahi-daemon' uses 32-bit capabilities (legacy support
in use)
[ 29.347528] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 29.347549] apm: overridden by ACPI.
[ 29.599214] ppdev: user-space parallel port driver
[ 38.045617] NET: Registered protocol family 17
[ 38.150261] [drm] Initialized drm 1.1.0 20060810
[ 38.173546] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12
[ 38.173568] PCI: setting IRQ 12 as level-triggered
[ 38.173580] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 12 (level, low)
-> IRQ 12
[ 38.179818] [drm] Initialized r128 2.5.0 20030725 on minor 0
[ 38.183302] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[ 38.183355] agpgart-via 0000:00:00.0: putting AGP V2 device into 1x mode
[ 38.183410] pci 0000:01:00.0: putting AGP V2 device into 1x mode
[ 40.361175] eth0: Setting full-duplex based on MII#0 link partner capability
of 41e1.
[ 47.508064] eth0: no IPv6 routers present
[ 141.996423] ppdev0: registered pardevice
[ 142.044117] ppdev0: unregistered pardevice
[ 144.256936] ppdev0: registered pardevice
[ 144.305033] ppdev0: unregistered pardevice
[ 145.632629] ppdev0: registered pardevice
[ 145.681285] ppdev0: unregistered pardevice
[ 1369.616081] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 1369.821395] usb 1-1: configuration #1 chosen from 1 choice
$ uname -a
Linux bryns 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686
GNU/Linux
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 8.10
Release: 8.10
Codename: intrepid
$ lsusb -v
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 001 Device 003: ID 040a:058c Kodak Co. C330
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 16
idVendor 0x040a Kodak Co.
idProduct 0x058c C330
bcdDevice 1.00
iManufacturer 1 Eastman Kodak Company
iProduct 2 KODAK EasyShare C330 Zoom Digital Camera
iSerial 3 C33031282267
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 6 Imaging
bInterfaceSubClass 1 Still Image Capture
bInterfaceProtocol 1 Picture Transfer Protocol (PIMA 15470)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 16
Device Status: 0x0001
Self Powered
Bus 001 Device 002: ID 1241:1111 Belkin Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1241 Belkin
idProduct 0x1111 Mouse
bcdDevice 1.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 52
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 8
cannot read device status, Operation not permitted (1)
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
"No group of professionals meets except to conspire against the public at
large."
-- Mark Twain
________________________________
From: Charlie Kravetz <[email protected]>
To: [email protected]
Sent: Monday, 29 December, 2008 15:10:08
Subject: [Bug 207887] Re: Camera conected, but not mount automaticaly - 2
Please attach the following from mothers system:
* Initiate the problem situation, then quickly get the output of dmesg
* Output of uname -a
* Output of lsb_release -a
* Output of lsusb -v
--
Camera conected, but not mount automaticaly - 2
https://bugs.launchpad.net/bugs/207887
You received this bug notification because you are a direct subscriber
of the bug.
Status in “gnome-mount” source package in Ubuntu: Incomplete
Bug description:
I plug my camera in USB port (Bus 001 Device 003: ID 040a:0579 Kodak Co.
CX7220). It is not automaticaly mounted, only when i do click in menu
Places/Kodak Co. CX7220. Then is mounted and show icon on Desktop.
Is this normal or not?
--
Camera conected, but not mount automaticaly - 2
https://bugs.launchpad.net/bugs/207887
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
