Greetings, I also have a Sansa Clip, firmware v01.01.29A, and I am having the same symptoms described in this bug report. I am running Hardy 8.04 (kernel 2.6.24-22-generic).
I found a message on the Sansa forums talking about this problem and a proposed work around of unloading the ehci_hcd module. Also mentioned in this report. http://forums.sandisk.com/sansa/board/message?board.id=clip&thread.id=8674 This will leave you with only USB1 speed as explained above in this report. I have found another solution for me that gives USB2 (480Mbps) every time without unloading the ehci_hcd module. This is not optimal, but works: * I plug in the Sansa Clip * Sansa powers up and acts like it connects * Hardy does not "see" it * I hold the power off button on the Sansa until it powers off * I release the power button then it powers up and connects at USB2 (480Mbps) This process works every time for me. I am willing to help and provide any information I can to resolve this problem. Reading on the Sansa forums, the opinion seemed to be a timing problem with the firmware. I can't speak to that issue, but I'll help test any way I can here. -- usb connect problems https://bugs.launchpad.net/bugs/231049 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
