xorg.0.log after switching to console and back (calibration is off now):
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux sascha-laptop 2.6.28-11-generic #42-Ubuntu SMP
Fri Apr 17 01:57:59 UTC 2009 i686
Build Date: 09 April 2009 02:10:02AM
xorg-server 2:1.6.0-0ubuntu14 (bui...@rothera.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 17 14:48:19 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable
AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0...@0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express
Integrated Graphics Controller rev 3, Mem @ 0xee100000/524288,
0xd0000000/268435456, 0xee200000/262144, I/O @ 0x00001800/8
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's
supported by the drivers
(II) Matched intel from file name intel.ids
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 0...@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xEE100000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at
address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LEN", prod id 16389
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): EDID vendor "LEN", prod id 16389
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1400x1050
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to
0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000202 to
0x80000242
(WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS
VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS
LBLC_EVENT_STATUS VBLANK_INT_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 746496 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 2985980 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card1
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card2
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card3
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card4
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card5
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card6
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card7
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card8
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card9
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card10
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card11
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card12
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card13
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card14
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmGetBusid returned ''
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
(EE) intel(0): Failed to set tiling on back buffer: rejected by kernel
(EE) intel(0): Failed to set tiling on depth buffer: rejected by kernel
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xee100000
(II) intel(0): [dri] visual configs initialized
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 34406400 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d924000 (pgoffset 55588)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB,
0x00000000bf800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB,
0x00000000bfe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x00000000bfe01000
physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB,
0x00000000bfe0b000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0d923fff: DRI memory manager (214420 kB)
(II) intel(0): 0x0d924000-0x0f9f3fff: exa offscreen (33600 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x01000000-0x01ffffff: depth buffer (16384 kB)
(II) intel(0): 0x02000000-0x02ffffff: back buffer (16384 kB)
(II) intel(0): 0x03000000-0x03ffffff: front buffer (16384 kB)
(II) intel(0): 0x0d924000: end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(WW) intel(0): Hardware claims pipe A is on while software believes it is off
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): [drm] mapped front buffer at 0xd3000000, handle = 0xd3000000
(II) intel(0): [drm] mapped back buffer at 0xd2000000, handle = 0xd2000000
(II) intel(0): [drm] mapped depth buffer at 0xd1000000, handle = 0xd1000000
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 245 x 184
(II) config/hal: Adding input device ThinkPad Extra Buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event7"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) ThinkPad Extra Buttons: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) ThinkPad Extra Buttons: xkb_model: "pc105"
(**) Option "xkb_layout" "de"
(**) ThinkPad Extra Buttons: xkb_layout: "de"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "de"
(**) AT Translated Set 2 keyboard: xkb_layout: "de"
(II) config/hal: Adding input device stylus
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.2-1 $
(**) stylus: always reports core events
(**) stylus device is /dev/ttyS0
(**) stylus (stylus) is not a pad
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) /dev/ttyS0: Tablet PC buttons are on
(**) Option "Button2" "3"
(**) stylus: button2 assigned to 3
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(**) Option "Device" "/dev/ttyS0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432
maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol
X=2540 resol Y=2540
(II) config/hal: Adding input device eraser
(**) eraser: always reports core events
(**) eraser device is /dev/ttyS0
(**) eraser (eraser) is not a pad
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) eraser: threshold = 15
(**) eraser: max x = 24576
(**) eraser: max y = 18432
(**) eraser: max z = 255
(**) /dev/ttyS0: Tablet PC buttons are on
(**) Option "Button2" "3"
(**) eraser: button2 assigned to 3
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(==) Wacom device "eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol
X=2540 resol Y=2540
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "de"
(**) Video Bus: xkb_layout: "de"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation"
(type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) intel(0): EDID vendor "LEN", prod id 16389
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1400x1050"x0.0 84.80 1400 1420 1536 1600 1050 1052
1057 1060 -hsync -vsync (53.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16389
(II) intel(0): EDID vendor "LEN", prod id 16389
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1400x1050"x0.0 84.80 1400 1420 1536 1600 1050 1052
1057 1060 -hsync -vsync (53.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16389
(II) intel(0): EDID vendor "LEN", prod id 16389
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1400x1050"x0.0 84.80 1400 1420 1536 1600 1050 1052
1057 1060 -hsync -vsync (53.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16389
xf86WcmSerialValidate: bad magic at 3 v=a0 l=9
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d924000 (pgoffset 55588)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB,
0x00000000bf800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB,
0x00000000bfe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x00000000bfe01000
physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB,
0x00000000bfe0b000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0d923fff: DRI memory manager (214420 kB)
(II) intel(0): 0x0d924000-0x0f9f3fff: exa offscreen (33600 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x01000000-0x01ffffff: depth buffer (16384 kB)
(II) intel(0): 0x02000000-0x02ffffff: back buffer (16384 kB)
(II) intel(0): 0x03000000-0x03ffffff: front buffer (16384 kB)
(II) intel(0): 0x0d924000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): [drm] mapped front buffer at 0xd3000000, handle = 0x2a600000
usbDetect: can not ioctl version
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432
maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "stylus" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol
X=2540 resol Y=2540
(==) Wacom device "eraser" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol
X=2540 resol Y=2540
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
xf86WcmSerialValidate: bad magic at 3 v=a0 l=9
(II) intel(0): EDID vendor "LEN", prod id 16389
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1400x1050"x0.0 84.80 1400 1420 1536 1600 1050 1052
1057 1060 -hsync -vsync (53.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525
-hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025
1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16389
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d924000 (pgoffset 55588)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB,
0x00000000bf800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB,
0x00000000bfe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x00000000bfe01000
physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB,
0x00000000bfe0b000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0d923fff: DRI memory manager (214420 kB)
(II) intel(0): 0x0d924000-0x0f9f3fff: exa offscreen (33600 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x01000000-0x01ffffff: depth buffer (16384 kB)
(II) intel(0): 0x02000000-0x02ffffff: back buffer (16384 kB)
(II) intel(0): 0x03000000-0x03ffffff: front buffer (16384 kB)
(II) intel(0): 0x0d924000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): [drm] mapped front buffer at 0xd3000000, handle = 0x2a601000
usbDetect: can not ioctl version
(==) Wacom General ISDV4 tablet speed=9600 (19200) maxX=24576 maxY=18432
maxZ=255 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "18432"
(**) Option "BottomY" "24576"
(==) Wacom device "stylus" top X=0 top Y=0 bottom X=18432 bottom Y=24576 resol
X=2540 resol Y=2540
(**) Option "BottomX" "18432"
(**) Option "BottomY" "24576"
(==) Wacom device "eraser" top X=0 top Y=0 bottom X=18432 bottom Y=24576 resol
X=2540 resol Y=2540
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
xf86WcmSerialValidate: bad magic at 3 v=a0 l=9
--
wacom loosing calibration after suspend or console
https://bugs.launchpad.net/bugs/375384
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
