Some issues with Ubuntu 10.04 (64bit) on a Fujitsu-Siemens Lifebook S7210. For some time after bootup the network just doesn't work, apparently until the connection speed is reduced to 100Mbps.
lspci: Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 14) ethtool -i eth0: driver: sky2 version: 1.25 firmware-version: N/A bus-info: 0000:04:00.0 uname -r: 2.6.32-22-generic dmesg: (lots of lines like this) [ 965.596662] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 966.029133] sky2 eth0: Link is down. [ 968.782951] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 969.387122] sky2 eth0: Link is down. [ 971.949581] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 972.999410] sky2 eth0: Link is down. [ 975.662757] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 976.008737] sky2 eth0: Link is down. [ 988.121189] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both -- Sky2 ethernet failing randomly with Marvell 88E8056 gigabit https://bugs.launchpad.net/bugs/138611 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
