Unfortunately this new driver did not fix the problem. The problem is still
there and there is no behavior change with this new driver.
This new driver work only ONCE and it's when it's used IMMEDIATELY after the
proprietary nVidia driver from the company nVidia.
In all other circumstance it fails like described above.
I proved I installed the driver like this;
$ dpkg -i xserver-xorg-video-nv_2.0.0-0ubuntu3.1_i386.deb
I proved I used this new driver;
$ diff /usr/lib/xorg/modules/drivers/nv_drv.so nv_drv.so.bak
Binary files /usr/lib/xorg/modules/drivers/nv_drv.so and nv_drv.so.bak differ
The diff below shows the /var/log/Xorg.0.log difference when the new
"nv" driver worked after being invoked after nVidia proprietary driver
ran (attached file: Xorg.0.log_nvafternvidia.txt). The other file is
after "nv" was relaunched after "nv" ran once, in this scenario the "nv"
didn't found the Analog device port A and found the wrong CRTC (attached
file: Xorg.0.log_nvafternv.txt).
You can see that the file Xorg.0.log_nvafternv.txt is showing you that
the driver failed to find "analog device on output A" and it was
mistaken by finding there was a monitor CRTC 1. I have only one monitor
attached to port 0 as it's detected when "nv" had detected when it
worked (after running after nvidia driver). When "nv" ran without
problem it found "analog device on output A" and found monitor 0 "Using
CRT on CRTC 0".
$ diff -Nur Xorg.0.log_nvafternvidia.txt Xorg.0.log_nvafternv.txt
--- Xorg.0.log_nvafternvidia.txt 2007-04-12 20:21:05.000000000 -0400
+++ Xorg.0.log_nvafternv.txt 2007-04-12 20:21:46.000000000 -0400
@@ -11,7 +11,7 @@
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
-(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 12 20:19:44 2007
+(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 12 20:21:21 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
@@ -428,7 +428,7 @@
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
-(--) NV(0): ...found one
+(--) NV(0): ...can't find one
(II) NV(0): Probing for analog device on output B...
(--) NV(0): ...found one
(II) NV(0): Probing for EDID on I2C bus A...
@@ -495,8 +495,8 @@
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): ... none found
-(--) NV(0): CRTC 0 appears to have a CRT attached
-(II) NV(0): Using CRT on CRTC 0
+(--) NV(0): CRTC 1 appears to have a CRT attached
+(II) NV(0): Using CRT on CRTC 1
(II) NV(0): Using hsync ranges from config file
(II) NV(0): Using vrefresh ranges from config file
(II) NV(0): Printing DDC gathered Modelines:
@@ -848,5 +848,3 @@
Could not init font path element /usr/X11R6/lib/X11/fonts/misc, removing from
list!
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from
list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from
list!
-(II) Open ACPI successful (/var/run/acpid.socket)
-(II) Configured Mouse: ps2EnableDataReporting: succeeded
Is there another driver you want me to test?
thanks very much
P.S. I attach the two new log files;
** Attachment added: "Xorg.0.log_nvafternvidia.txt"
http://librarian.launchpad.net/7315304/Xorg.0.log_nvafternvidia.txt
--
xorg won't start on nvida 6600 card due to nv driver not supporting 6600's
https://bugs.launchpad.net/bugs/102683
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[EMAIL PROTECTED]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
