@Colin
In my early troubleshooting efforts I set the performance mode
and if I recall there was no problem. When I set powersave it crashed
few seconds later.
Here are the last lines from the log shortly before crash:
------------------------------------------------------------------------------------------------------------------------------------
kernel: [ 126.610093] No probe response from AP 00:16:01:af:aa:7c after 500ms,
disconnecting.
kernel: [ 127.110065] iwlagn 0000:05:00.0: Error sending REPLY_RXON: time out
after 500ms.
kernel: [ 127.110079] iwlagn 0000:05:00.0: Error setting new RXON (-110)
kernel: [ 127.610087] iwlagn 0000:05:00.0: Error sending REPLY_REMOVE_STA: time
out after 500ms.
kernel: [ 127.610103] iwlagn 0000:05:00.0: Error removing station
00:16:01:af:aa:7c
kernel: [ 127.662743] cfg80211: All devices are disconnected, going to restore
regulatory settings
kernel: [ 127.662763] cfg80211: Restoring regulatory settings
kernel: [ 127.662773] cfg80211: Calling CRDA to update world regulatory domain
kernel: [ 127.675943] cfg80211: World regulatory domain updated:
kernel: [ 127.675953] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
kernel: [ 127.675961] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000
mBm)
kernel: [ 127.675968] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000
mBm)
kernel: [ 127.675975] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000
mBm)
kernel: [ 127.675983] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000
mBm)
kernel: [ 127.675989] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000
mBm)
kernel: [ 127.873202] iwlagn 0000:05:00.0: HARDWARE GONE?? INTA == 0xffffffff
kernel: [ 127.873202] iwlagn 0000:05:00.0: HARDWARE GONE?? INTA == 0xffffffff
kernel: [ 128.466123] iwlagn 0000:05:00.0: Error sending REPLY_SCAN_CMD: time
out after 500ms.
kernel: [ 128.960078] iwlagn 0000:05:00.0: Error sending
REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
I also found something interesting in the pm-powersave.log:
Running hook /usr/lib/pm-utils/power.d/wireless false:
Turning powersave for wlan0 off...Error for wireless request "Set Power
Management" (8B2C) :
SET failed on device wlan0 ; Operation not supported.
Failed.
/usr/lib/pm-utils/power.d/wireless false: success.
---------------------------------------------------------------------------------------------------------------------------------------------------------
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/656745
Title:
notebook always crashes if on battery (dell vostro 3700 and others)
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
