Public bug reported: After upgrade of ubuntu-server from maveric to oneiric, a bond link failed to automatically get up on system startup.
The network is configured as follows and the configuration was not changed: root@srv2:/etc/network/if-pre-up.d# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto bond0 iface bond0 inet manual slaves eth0 eth1 bond_mode 4 bond_miimon 100 bond_downdelay 200 bond_updelay 200 bond_lacp_rate 1 auto bond0.904 iface bond0.904 inet manual auto vmbr0 iface vmbr0 inet static bridge_ports bond0.904 bridge_stp off address 192.168.220.2 netmask 255.255.255.0 network 192.168.220.0 broadcast 192.168.220.255 gateway 192.168.220.254 The simple solution is to change line order of "enslave_slaves" in /etc/network/if-pre-up.d/ifenslave -- se attached diff ** Affects: ifenslave-2.6 (Ubuntu) Importance: Undecided Status: New ** Tags: bonding ifenslave network -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/881379 Title: ifenslave fails to bring up bond link To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ifenslave-2.6/+bug/881379/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs