** Summary changed: - USB hard drive (iPod) I/O errors on read. Works fine in Feisty LiveCD + USB hard drive (iPod) I/O errors on read
** Description changed: Binary package hint: linux-source-2.6.20 I'm getting I/O errors when trying to read from a USB drive (iPod, 4th gen, 20 GB) on a fresh Feisty install. - -The USB drive (iPod) works fine while booted up to a Feisty LiveCD -The USB drive (iPod) works fine in Windows XP - -I have a second, identical, iPod that acts the same way (I/O errors while reading on a fresh Feisty install but works fine with the LiveCD and Windows XP) + -I have a second, identical, iPod that acts the same way Kernel: 2.6.20-15-generic /var/log/messages [ 81.186626] usb 4-2: new high speed USB device using ehci_hcd and address 3 [ 81.319663] usb 4-2: configuration #1 chosen from 1 choice [ 81.320018] scsi1 : SCSI emulation for USB Mass Storage devices [ 86.323066] scsi 1:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0 [ 86.326962] SCSI device sdb: 39063023 512-byte hdwr sectors (20000 MB) [ 86.327854] sdb: Write Protect is off [ 86.329474] SCSI device sdb: 39063023 512-byte hdwr sectors (20000 MB) [ 86.330351] sdb: Write Protect is off [ 86.330362] sdb: sdb1 sdb2 [ 86.401917] sd 1:0:0:0: Attached scsi removable disk sdb [ 86.402002] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 102.963876] usb 4-2: reset high speed USB device using ehci_hcd and address 3 [ 133.204025] usb 4-2: reset high speed USB device using ehci_hcd and address 3 [ 143.446733] usb 4-2: reset high speed USB device using ehci_hcd and address 3 [ 159.792681] usb 4-2: reset high speed USB device using ehci_hcd and address 3 [ 160.040649] usb 4-2: reset high speed USB device using ehci_hcd and address 3 [ 170.283313] usb 4-2: reset high speed USB device using ehci_hcd and address 3 [ 170.416509] sd 1:0:0:0: scsi: Device offlined - not ready after error recovery [ 170.416532] sd 1:0:0:0: SCSI error: return code = 0x00050000 [ 170.416536] end_request: I/O error, dev sdb, sector 11072029 [ 170.416595] lost page write due to I/O error on sdb2 [ 170.416610] lost page write due to I/O error on sdb2 [ 170.416625] lost page write due to I/O error on sdb2 [ 170.416633] lost page write due to I/O error on sdb2 [ 170.416646] lost page write due to I/O error on sdb2 [ 170.416654] lost page write due to I/O error on sdb2 [ 170.416661] lost page write due to I/O error on sdb2 [ 170.416668] lost page write due to I/O error on sdb2 [ 176.519551] lost page write due to I/O error on sdb2 [ 176.519567] lost page write due to I/O error on sdb2 [ 210.206268] usb 4-2: USB disconnect, address 3 /var/log/dmesg [ 26.397583] usb 1-1: new full speed USB device using uhci_hcd and address 3 [ 26.567620] usb 1-1: configuration #1 chosen from 1 choice [ 26.572573] hub 1-1:1.0: USB hub found [ 26.574518] hub 1-1:1.0: 3 ports detected [ 26.845607] hdc: LTN526D, ATAPI CD/DVD-ROM drive [ 26.887371] usb 1-1.1: new full speed USB device using uhci_hcd and address 4 [ 27.031437] usb 1-1.1: configuration #1 chosen from 1 choice [ 27.247224] usb 1-1.2: new full speed USB device using uhci_hcd and address 5 [ 27.392287] usb 1-1.2: configuration #1 chosen from 1 choice [ 27.599068] usb 1-1.3: new full speed USB device using uhci_hcd and address 6 [ 27.629510] hdd: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive [ 27.685829] ide1 at 0x170-0x177,0x376 on irq 15 [ 27.697154] SCSI subsystem initialized [ 27.704343] libata version 2.20 loaded. [ 27.716512] hda: max request size: 128KiB [ 27.724969] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) [ 27.724982] hda: cache flushes not supported [ 27.725065] hda: hda1 hda2 <<6>usb 1-1.3: configuration #1 chosen from 1 choice [ 27.768828] usbcore: registered new interface driver libusual [ 27.775215] Initializing USB Mass Storage driver... [ 27.779032] hda5 > [ 27.779760] hdb: max request size: 128KiB [ 27.785634] hdb: 8421840 sectors (4311 MB) w/256KiB Cache, CHS=8912/15/63, UDMA(66) [ 27.785646] hdb: cache flushes not supported [ 27.785710] hdb:<6>scsi0 : SCSI emulation for USB Mass Storage devices [ 27.786890] usbcore: registered new interface driver usb-storage [ 27.786896] USB Mass Storage support registered. [ 27.787045] usb-storage: device found at 6 [ 27.787049] usb-storage: waiting for device to settle before scanning [ 27.820845] hdb1 [ 27.832704] hdc: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33) [ 27.832717] Uniform CD-ROM driver Revision: 3.20 [ 27.872893] hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA [ 28.354832] Attempting manual resume [ 28.354838] swsusp: Resume From Partition 3:5 [ 28.354841] PM: Checking swsusp image. [ 28.355024] PM: Resume from disk failed. [ 28.390346] kjournald starting. Commit interval 5 seconds [ 28.390365] EXT3-fs: mounted filesystem with ordered data mode. [ 32.836978] usb-storage: device scan complete [ 32.983904] scsi 0:0:0:0: Direct-Access OEI-USB CF/SM/SD/MS 2.4 PQ: 0 ANSI: 0 -- USB hard drive (iPod) I/O errors on read https://bugs.launchpad.net/bugs/116440 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
