Hello,
My installation has similar issues. Specifically, the wpc11 card works with
the Live-CD but not after installing it to the hard drive.
System info:
Toshiba Satellite 4090xdvd P2 400Mhz
Linksys wpc11
results from lspci, dmesg and cat /proc/version results with the live CD
session follow:
[EMAIL PROTECTED]:~$ lspci
0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (AGP disabled) (rev 03)
0000:00:02.0 CardBus bridge: Toshiba America Info Systems ToPIC97 (rev 05)
0000:00:02.1 CardBus bridge: Toshiba America Info Systems ToPIC97 (rev 05)
0000:00:04.0 VGA compatible controller: Trident Microsystems Cyber 9525 (rev 49)
0000:00:05.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:05.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:05.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:05.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:07.0 Communication controller: Agere Systems 56k WinModem (rev 01)
0000:00:0a.0 Communication controller: Toshiba America Info Systems FIR Port
(rev 23)
0000:00:0c.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev
10)
[EMAIL PROTECTED]:~$ dmesg
[17179569.184000] Linux version 2.6.15-26-386 ([EMAIL PROTECTED]) (gcc version
4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 0000000005fe0000 (usable)
[17179569.184000] BIOS-e820: 0000000005fe0000 - 0000000005ff0000 (ACPI
data)[17179569.184000] BIOS-e820: 0000000005ff0000 - 0000000006000000
(reserved)
[17179569.184000] BIOS-e820: 00000000100a0000 - 00000000100b6e00 (reserved)
[17179569.184000] BIOS-e820: 00000000100b6e00 - 00000000100b7000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000100b7000 - 0000000010100000 (reserved)
[17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 95MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 24544
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 20448 pages, LIFO batch:3
[17179569.184000] HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.1 present.
[17179569.184000] ACPI: RSDP (v000 TOSHIB ) @
0x000f0160
[17179569.184000] ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000)
@ 0x05fe0000
[17179569.184000] ACPI: FADT (v001 TOSHIB 750 0x00970814 TASM 0x04010000)
@ 0x05fe0054
[17179569.184000] ACPI: DSDT (v001 TOSHIB 4030 0x19991112 MSFT 0x0100000a)
@ 0x00000000
[17179569.184000] ACPI: BIOS age (1999) fails cutoff (2000), acpi=force is
required to enable ACPI
[17179569.184000] ACPI: Disabling ACPI support
[17179569.184000] Allocating PCI resources starting at 20000000 (gap:
10100000:efe80000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz
preseed/file=/cdrom/preseed/xubuntu.seed boot=casper initrd=/casper/initrd.gz
ramdisk_size=1048576 root=/dev/ram rw quiet splash --
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable
it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (010c1000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 512 (order: 9, 8192 bytes)
[ 0.000000] Detected 399.983 MHz processor.
[ 28.217217] Using tsc for high-res timesource
[ 28.219992] Console: colour VGA+ 80x25
[ 28.220518] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)[
28.220909] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 28.236227] Memory: 86720k/98176k available (1976k kernel code, 11004k
reserved, 606k data, 288k init, 0k highmem)
[ 28.236246] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 28.313934] Calibrating delay using timer specific routine.. 801.18 BogoMIPS
(lpj=1602374)
[ 28.314064] Security Framework v1.0.0 initialized
[ 28.314095] SELinux: Disabled at boot.
[ 28.314153] Mount-cache hash table entries: 512
[ 28.314529] CPU: After generic identify, caps: 0183f9ff 00000000 00000000
00000000 00000000 00000000 00000000
[ 28.314563] CPU: After vendor identify, caps: 0183f9ff 00000000 00000000
00000000 00000000 00000000 00000000
[ 28.314601] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 28.314613] CPU: L2 cache: 128K
[ 28.314624] CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040
00000000 00000000 00000000
[ 28.314689] mtrr: v2.0 (20020519)
[ 28.314708] CPU: Intel Celeron (Mendocino) stepping 0a
[ 28.314725] Enabling fast FPU save and restore... done.
[ 28.314742] Checking 'hlt' instruction... OK.
[ 28.330544] checking if image is initramfs... it is
[ 32.254800] Freeing initrd memory: 6843k freed
[ 32.310170] NET: Registered protocol family 16
[ 32.310303] EISA bus registered
[ 32.312478] PCI: PCI BIOS revision 2.10 entry at 0xfedcd, last bus=21
[ 32.312503] PCI: Using configuration type 1
[ 32.313422] ACPI: Subsystem revision 20051216
[ 32.313433] ACPI: Interpreter disabled.
[ 32.313447] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 32.313511] pnp: PnP ACPI: disabled
[ 32.313527] PnPBIOS: Scanning system for PnP BIOS support...
[ 32.313668] PnPBIOS: Found PnP BIOS installation structure at 0xc00f8ed0
[ 32.313685] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x933a, dseg 0x0
[ 32.373636] PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
[ 32.373711] PCI: Probing PCI hardware
[ 32.373729] PCI: Probing PCI hardware (bus 00)
[ 32.374194] Boot video device is 0000:00:04.0
[ 32.374536] PCI quirk: region fe00-fe3f claimed by PIIX4 ACPI
[ 32.374551] PCI quirk: region fe70-fe7f claimed by PIIX4 SMB
[ 32.374567] PIIX4 devres B PIO at 006c-006f
[ 32.377812] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:05.0
[ 32.377849] PCI: IRQ 0 for device 0000:00:02.0 doesn't match PIRQ mask - try
pci=usepirqmask
[ 32.377866] PCI: Found IRQ 11 for device 0000:00:02.0
[ 32.377886] PCI: Sharing IRQ 11 with 0000:00:04.0
[ 32.377917] PCI: IRQ 0 for device 0000:00:02.1 doesn't match PIRQ mask - try
pci=usepirqmask
[ 32.377932] PCI: Found IRQ 11 for device 0000:00:02.1
[ 32.377965] PCI: Sharing IRQ 11 with 0000:00:0c.0
[ 32.390164] PCI: Bus 1, cardbus bridge: 0000:00:02.0
[ 32.390182] IO window: 00001000-000010ff
[ 32.390196] IO window: 00001400-000014ff
[ 32.390211] PREFETCH window: 20000000-21ffffff
[ 32.390226] MEM window: 22000000-23ffffff
[ 32.390240] PCI: Bus 5, cardbus bridge: 0000:00:02.1
[ 32.390251] IO window: 00001800-000018ff
[ 32.390264] IO window: 00002000-000020ff
[ 32.390279] PREFETCH window: 24000000-25ffffff
[ 32.390294] MEM window: 26000000-27ffffff
[ 32.390324] PCI: Found IRQ 11 for device 0000:00:02.0
[ 32.390344] PCI: Sharing IRQ 11 with 0000:00:04.0
[ 32.390377] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 32.390401] PCI: Found IRQ 11 for device 0000:00:02.1
[ 32.390436] PCI: Sharing IRQ 11 with 0000:00:0c.0
[ 32.390451] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 32.392617] audit: initializing netlink socket (disabled)
[ 32.392663] audit(1182446648.100:1): initialized
[ 32.393124] VFS: Disk quotas dquot_6.5.1
[ 32.393221] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 32.393501] Initializing Cryptographic API
[ 32.393524] io scheduler noop registered
[ 32.393550] io scheduler anticipatory registered
[ 32.393580] io scheduler deadline registered
[ 32.393620] io scheduler cfq registered
[ 32.393637] Limiting direct PCI/PCI transfers.
[ 32.394368] isapnp: Scanning for PnP cards...
[ 32.747803] isapnp: No Plug & Play device found
[ 32.834166] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 32.836748] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 32.837004] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 32.837211] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ
sharing enabled
[ 32.837657] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 32.848723] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 32.851444] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024
blocksize
[ 32.851672] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 32.851691] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 32.852291] mice: PS/2 mouse device common for all mice
[ 32.853080] EISA: Probing bus 0 at eisa.0
[ 32.853105] Cannot allocate resource for EISA slot 1
[ 32.853118] Cannot allocate resource for EISA slot 2
[ 32.853162] EISA: Detected 0 cards.
[ 32.853448] NET: Registered protocol family 2
[ 32.877089] input: AT Translated Set 2 keyboard as /class/input/input0
[ 32.897518] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)[
32.898037] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 32.898126] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 32.898210] TCP: Hash tables configured (established 4096 bind 4096)
[ 32.898222] TCP reno registered
[ 32.898558] TCP bic registered
[ 32.898591] NET: Registered protocol family 1
[ 32.898618] NET: Registered protocol family 8
[ 32.898628] NET: Registered protocol family 20
[ 32.898704] Using IPI Shortcut mode
[ 32.898860] Freeing unused kernel memory: 288k freed
[ 33.160173] vga16fb: initializing
[ 33.160196] vga16fb: mapped to 0xc00a0000
[ 33.229023] Console: switching to colour frame buffer device 80x25
[ 33.229052] fb0: VGA16 VGA frame buffer device
[ 34.546826] Capability LSM initialized
[ 37.049009] PIIX4: IDE controller at PCI slot 0000:00:05.1
[ 37.049062] PIIX4: chipset revision 1
[ 37.049073] PIIX4: not 100% native mode: will probe irqs later
[ 37.049102] ide0: BM-DMA at 0xfe60-0xfe67, BIOS settings: hda:DMA,
hdb:pio
[ 37.049148] ide1: BM-DMA at 0xfe68-0xfe6f, BIOS settings: hdc:DMA,
hdd:pio
[ 37.049182] Probing IDE interface ide0...
[ 37.336856] hda: TOSHIBA MK6411MAT, ATA DISK drive
[ 38.008824] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 38.009482] Probing IDE interface ide1...
[ 38.744651] hdc: TOSHIBA DVD-ROM SD-C2102, ATAPI CD/DVD-ROM drive
[ 39.416648] ide1 at 0x170-0x177,0x376 on irq 15
[ 39.448235] hda: max request size: 128KiB
[ 40.059300] hda: 12685680 sectors (6495 MB), CHS=13424/15/63, UDMA(33)
[ 40.059329] hda: cache flushes not supported
[ 40.059939] hda: hda1 hda2 < hda5 >
[ 40.096781] hdc: ATAPI 20X DVD-ROM drive, 128kB Cache, DMA
[ 40.096812] Uniform CD-ROM driver Revision: 3.20
[ 41.203317] usbcore: registered new driver usbfs
[ 41.204808] usbcore: registered new driver hub
[ 41.214311] USB Universal Host Controller Interface driver v2.3
[ 41.215869] PCI: Found IRQ 11 for device 0000:00:05.2
[ 41.215940] uhci_hcd 0000:00:05.2: UHCI Host Controller
[ 41.217515] uhci_hcd 0000:00:05.2: new USB bus registered, assigned bus
number 1
[ 41.217553] uhci_hcd 0000:00:05.2: irq 11, io base 0x0000ffe0
[ 41.218914] hub 1-0:1.0: USB hub found
[ 41.218973] hub 1-0:1.0: 2 ports detected
[ 41.560138] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 42.572740] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 42.643308] ISO 9660 Extensions: RRIP_1991A
[ 42.726965] loop: loaded (max 8 devices)
[ 42.780300] Registering unionfs 1.1.2
[ 42.901092] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
[ 163.245218] piix4_smbus 0000:00:05.3: Found 0000:00:05.3 device
[ 163.318523] ltmodem: module license 'Proprietary' taints kernel.
[ 163.323843] Loading Lucent Modem Controller driver version 8.26-alk-8
[ 163.342454] PCI: Found IRQ 11 for device 0000:00:02.0
[ 163.342484] PCI: Sharing IRQ 11 with 0000:00:04.0
[ 163.342532] Yenta: CardBus bridge found at 0000:00:02.0 [1179:0001]
[ 163.347106] PCI: Hardcoded IRQ 15 for device 0000:00:07.0
[ 163.347167] Detected Parameters Irq=3 BaseAddress=0x1c00 ComAddress=0x2f8
[ 163.347255] ttyLTM0 at I/O 0x1c00 (irq = 3) is a Lucent/Agere Modem
[ 163.467966] Yenta: ISA IRQ mask 0x04b0, PCI irq 11
[ 163.467984] Socket status: 30000007
[ 163.468972] PCI: Found IRQ 11 for device 0000:00:02.1
[ 163.469019] PCI: Sharing IRQ 11 with 0000:00:0c.0
[ 163.469059] Yenta: CardBus bridge found at 0000:00:02.1 [1179:0001]
[ 163.596000] Yenta: ISA IRQ mask 0x04b0, PCI irq 11
[ 163.596019] Socket status: 30000011
[ 164.287153] pccard: PCMCIA card inserted into slot 1
[ 165.711152] input: PS/2 Generic Mouse as /class/input/input1
[ 165.945387] Real Time Clock Driver v1.12
[ 166.487066] irda_init()
[ 166.487132] NET: Registered protocol family 23
[ 166.664950] PCI: Found IRQ 11 for device 0000:00:0a.0
[ 166.666128] IrDA: Registered device irda0
[ 166.666145] toshoboe: Using multiple tasks, version $Id: donauboe.c V2.18
ven jan 10 03:14:16 2003$
[ 167.135228] Floppy drive(s): fd0 is 1.44M
[ 167.221172] FDC 0 is an 8272A
[ 167.252203] Linux video capture interface: v1.00
[ 167.623125] parport: PnPBIOS parport detected.
[ 167.623195] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 168.093036] quickcam: QuickCam USB camera found (driver version QuickCam USB
0.6.3 $Date: 2005/04/15 19:32:49 $)
[ 168.093072] quickcam: Kernel:2.6.15-26-386 bus:1 class:FF subclass:FF
vendor:046D product:0870
[ 168.171775] quickcam: Sensor HDCS-1000/1100 detected
[ 168.175513] quickcam: Registered device: /dev/video0
[ 168.175574] usbcore: registered new driver quickcam
[ 168.476187] input: PC Speaker as /class/input/input2
[ 168.954358] ts: Compaq touchscreen protocol output
[ 170.106683] PCI: Found IRQ 11 for device 0000:00:0c.0
[ 170.106713] PCI: Sharing IRQ 11 with 0000:00:02.1
[ 170.383573] cs: IO port probe 0x100-0x3af: clean.
[ 170.384758] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 170.385330] cs: IO port probe 0x820-0x8ff: clean.
[ 170.385824] cs: IO port probe 0xc00-0xcf7: clean.
[ 170.386874] cs: IO port probe 0xa00-0xaff: clean.
[ 170.391404] cs: IO port probe 0x100-0x3af: clean.
[ 170.392552] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 170.393117] cs: IO port probe 0x820-0x8ff: clean.
[ 170.393604] cs: IO port probe 0xc00-0xcf7: clean.
[ 170.394568] cs: IO port probe 0xa00-0xaff: clean.
[ 170.395118] cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 170.407969] pcmcia: registering new device pcmcia1.0
[ 170.777123] orinoco 0.15rc3 (David Gibson <[EMAIL PROTECTED]>, Pavel Roskin
<[EMAIL PROTECTED]>, et al)
[ 170.790197] es1968: clocking to 48000
[ 170.832002] orinoco_cs 0.15rc3 (David Gibson <[EMAIL PROTECTED]>, Pavel
Roskin <[EMAIL PROTECTED]>, et al)
[ 170.980352] eth0: Hardware identity 8002:0000:0001:0000
[ 170.980498] eth0: Station identity 001f:0003:0000:0008
[ 170.980512] eth0: Firmware determined as Intersil 0.8.3
[ 170.980523] eth0: Ad-hoc demo mode supported
[ 170.980533] eth0: IEEE standard IBSS ad-hoc mode supported
[ 170.980543] eth0: WEP supported, 104-bit key
[ 170.980637] eth0: MAC address 00:04:5A:0D:9B:99
[ 170.980745] eth0: Station name "Prism I"
[ 170.981268] eth0: ready
[ 170.982336] eth0: index 0x01: Vcc 5.0, irq 4, io 0x0100-0x013f
[ 171.146775] ieee80211_crypt: registered algorithm 'NULL'
[ 171.365868] hostap_cs: 0.4.4-kernel (Jouni Malinen <[EMAIL PROTECTED]>)
[ 174.802867] eth0: New link status: Connected (0001)
[ 175.748273] NET: Registered protocol family 17
[ 176.330779] Adding 265032k swap on /dev/hda5. Priority:-1 extents:1
across:265032k
[ 177.057621] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 177.057640] md: bitmap version 4.39
[ 177.183631] eth0: New link status: AP Out of Range (0004)
[ 178.711657] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL
PROTECTED]
[ 221.272698] eth0: New link status: AP In Range (0005)
[ 223.509504] eth0: New link status: AP Out of Range (0004)
[ 256.082400] eth0: New link status: AP In Range (0005)
[ 258.318001] eth0: New link status: AP Out of Range (0004)
[ 271.239963] lp0: using parport0 (interrupt-driven).
[ 271.348382] ppdev: user-space parallel port driver
[ 273.087233] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[ 280.830390] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 280.830418] hdc: drive_cmd: error=0x04 { AbortedCommand }
[ 280.830431] ide: failed opcode was: 0xec
[ 305.839274] eth0: New link status: AP In Range (0005)
[ 308.075131] eth0: New link status: AP Out of Range (0004)
[ 309.525008] eth0: New link status: AP In Range (0005)
[ 311.807205] eth0: New link status: AP Out of Range (0004)
[ 325.292438] eth0: New link status: AP In Range (0005)
[ 327.528403] eth0: New link status: AP Out of Range (0004)
[ 352.115401] eth0: New link status: AP In Range (0005)
[ 354.351764] eth0: New link status: AP Out of Range (0004)
[ 355.903619] eth0: New link status: AP In Range (0005)
[ 358.141085] eth0: New link status: AP Out of Range (0004)
[ 368.804029] eth0: New link status: AP In Range (0005)
[ 371.056751] eth0: New link status: AP Out of Range (0004)
[ 371.527025] eth0: New link status: AP In Range (0005)
[ 373.764667] eth0: New link status: AP Out of Range (0004)
[ 376.584407] eth0: New link status: AP In Range (0005)
[ 378.821134] eth0: New link status: AP Out of Range (0004)
[ 409.346239] eth0: New link status: AP In Range (0005)
[ 411.581988] eth0: New link status: AP Out of Range (0004)
[ 414.670031] eth0: New link status: AP In Range (0005)
[ 416.905911] eth0: New link status: AP Out of Range (0004)
[ 419.584360] eth0: New link status: AP In Range (0005)
[ 421.820637] eth0: New link status: AP Out of Range (0004)
[ 429.515219] eth0: New link status: AP In Range (0005)
[ 431.752969] eth0: New link status: AP Out of Range (0004)
[ 459.615141] eth0: New link status: AP In Range (0005)
[ 461.850935] eth0: New link status: AP Out of Range (0004)
[ 469.443688] eth0: New link status: AP In Range (0005)
[ 471.798772] eth0: New link status: AP Out of Range (0004)
[ 475.791298] eth0: New link status: AP In Range (0005)
[ 478.073470] eth0: New link status: AP Out of Range (0004)
[ 649.736622] eth0: New link status: AP In Range (0005)
[ 652.074822] eth0: New link status: AP Out of Range (0004)
[ 652.500299] eth0: New link status: AP In Range (0005)
[ 654.737981] eth0: New link status: AP Out of Range (0004)
[ 655.469864] eth0: New link status: AP In Range (0005)
[ 657.706417] eth0: New link status: AP Out of Range (0004)
[ 661.816943] eth0: New link status: AP In Range (0005)
[ 664.069353] eth0: New link status: AP Out of Range (0004)
[ 698.059703] eth0: New link status: AP In Range (0005)
[ 700.295933] eth0: New link status: AP Out of Range (0004)
[ 705.431649] eth0: New link status: AP In Range (0005)
[ 707.668270] eth0: New link status: AP Out of Range (0004)
[ 709.116815] eth0: New link status: AP In Range (0005)
[ 711.353602] eth0: New link status: AP Out of Range (0004)
[ 711.784705] eth0: New link status: AP In Range (0005)
[ 714.114922] eth0: New link status: AP Out of Range (0004)
[ 717.921545] eth0: New link status: AP In Range (0005)
[ 720.159947] eth0: New link status: AP Out of Range (0004)
[ 726.009622] eth0: New link status: AP In Range (0005)
[ 728.245772] eth0: New link status: AP Out of Range (0004)
[ 728.667986] eth0: New link status: AP In Range (0005)
[ 752.013072] NET: Registered protocol family 10
[ 752.013694] lo: Disabled Privacy Extensions
[ 752.013919] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 752.014053] IPv6 over IPv4 tunneling driver
[ 864.299262] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1476.985864] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1477.413979] eth0: New link status: Connected (0001)
[ 1477.414187] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1487.915351] eth0: no IPv6 routers present
[ 1500.042011] eth0: New link status: AP Changed (0003)
[EMAIL PROTECTED]:~$ cat /proc/version
Linux version 2.6.15-26-386 ([EMAIL PROTECTED]) (gcc version 4.0.3 (Ubuntu
4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
--
xubuntu--wireless is detected in live cd, but fails to install
https://bugs.launchpad.net/bugs/68248
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
