SO, i noticed that usblp is removed when i print: Nov 17 23:14:52 salzburg kernel: [ 138.202412] usb 3-2: USB disconnect, device number 2 Nov 17 23:14:52 salzburg kernel: [ 138.202676] usblp0: removed Nov 17 23:14:52 salzburg udev-configure-printer: remove /devices/pci0000:00/0000:00:14.0/usb3/3-2 Nov 17 23:15:53 salzburg kernel: [ 199.778423] usb 3-2: new high-speed USB device number 3 using xhci_hcd Nov 17 23:15:53 salzburg kernel: [ 199.827091] usb 3-2: New USB device found, idVendor=04b8, idProduct=0007 Nov 17 23:15:53 salzburg kernel: [ 199.827098] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 17 23:15:53 salzburg kernel: [ 199.827102] usb 3-2: Product: USB2.0 Printer (Hi-speed) Nov 17 23:15:53 salzburg kernel: [ 199.827105] usb 3-2: Manufacturer: EPSON Nov 17 23:15:53 salzburg kernel: [ 199.827108] usb 3-2: SerialNumber: HN0100912251742080 Nov 17 23:15:53 salzburg kernel: [ 199.827494] usb 3-2: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes Nov 17 23:15:53 salzburg kernel: [ 199.827506] usb 3-2: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes Nov 17 23:15:53 salzburg kernel: [ 199.827747] usb 3-2: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes Nov 17 23:15:53 salzburg kernel: [ 199.827761] usb 3-2: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes Nov 17 23:15:53 salzburg kernel: [ 199.836932] usblp 3-2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0007 Nov 17 23:15:53 salzburg mtp-probe: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2" Nov 17 23:15:53 salzburg mtp-probe: bus: 3, device: 3 was not an MTP device Nov 17 23:15:53 salzburg udev-configure-printer: add /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0 Nov 17 23:15:53 salzburg udev-configure-printer: device devpath is /devices/pci0000:00/0000:00:14.0/usb3/3-2 Nov 17 23:15:53 salzburg udev-configure-printer: MFG:EPSON MDL:Stylus Photo R800 SERN:- serial:HN0100912251742080 Nov 17 23:15:54 salzburg kernel: [ 200.954811] usblp0: removed Nov 17 23:15:55 salzburg kernel: [ 200.965745] usb 3-2: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes Nov 17 23:15:55 salzburg kernel: [ 200.965757] usb 3-2: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes Nov 17 23:15:55 salzburg kernel: [ 200.975036] usblp 3-2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0007 Nov 17 23:15:55 salzburg udev-configure-printer: URI contains USB serial number Nov 17 23:15:55 salzburg udev-configure-printer: URI match: usb://EPSON/Stylus%20Photo%20R800?serial=HN0100912251742080 Nov 17 23:15:55 salzburg udev-configure-printer: URI of detected printer: usb://EPSON/Stylus%20Photo%20R800?serial=HN0100912251742080, normalized: epson stylus photo r800 serial hn0100912251742080 Nov 17 23:15:55 salzburg udev-configure-printer: Consider also queues with "/usb/lp0" or "/usblp0" in their URIs as matching Nov 17 23:15:55 salzburg udev-configure-printer: URI of print queue: usb://EPSON/Stylus%20Photo%20R800?serial=HN0100912251742080, normalized: epson stylus photo r800 serial hn0100912251742080 Nov 17 23:15:55 salzburg udev-configure-printer: Queue ipp://localhost:631/printers/Stylus-Photo-R800 has matching device URI Nov 17 23:15:55 salzburg udev-configure-printer: Re-enabled printer ipp://localhost:631/printers/Stylus-Photo-R800
<i print here> Nov 17 23:16:12 salzburg kernel: [ 218.524526] usblp0: removed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1074759 Title: epson stylus photo r800 fails print after 12.10 Quantal Quetzal upgrade To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1074759/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
