Hello installing kernel 3.6 self compiled resolved this issue. Try to install the new kernel compiling from source and then let me know. Giuseppe Il giorno 10/dic/2012 22:41, "Hubert FONGARNAND" <[email protected]> ha scritto:
> I've exactly the same problem. I have an COMPAQ CQ58 130SF > I am running ubuntu 12.10 64bit. I've upgraded to mainline kernel to test > if the bug persits... it persits... > > The log when the connection drop : > Dec 10 22:17:08 hubert-Presario-CQ58-Notebook-PC kernel: [ 1098.293443] > ath: phy0: Failed to wakeup in 500us > Dec 10 22:17:08 hubert-Presario-CQ58-Notebook-PC kernel: [ 1098.342506] > ath: phy0: Failed to wakeup in 500us > Dec 10 22:17:08 hubert-Presario-CQ58-Notebook-PC kernel: [ 1098.458411] > ath: phy0: Failed to wakeup in 500us > Dec 10 22:17:09 hubert-Presario-CQ58-Notebook-PC kernel: [ 1098.574446] > ath: phy0: Failed to wakeup in 500us > Dec 10 22:17:09 hubert-Presario-CQ58-Notebook-PC kernel: [ 1098.591914] > ath: phy0: Failed to wakeup in 500us > Dec 10 22:17:09 hubert-Presario-CQ58-Notebook-PC kernel: [ 1098.603343] > ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff > AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff > Dec 10 22:17:09 hubert-Presario-CQ58-Notebook-PC kernel: [ 1098.603385] > ath: phy0: Could not stop RX, we could be confusing the DMA engine when we > start RX up > Dec 10 22:17:09 hubert-Presario-CQ58-Notebook-PC kernel: [ 1098.667323] > ath: phy0: Failed to stop TX DMA, queues=0x10f! > Dec 10 22:17:09 hubert-Presario-CQ58-Notebook-PC kernel: [ 1098.786952] > ath: phy0: Chip reset failed > Dec 10 22:17:09 hubert-Presario-CQ58-Notebook-PC kernel: [ 1098.786959] > ath: phy0: Unable to reset channel, reset status -22 > Dec 10 22:17:10 hubert-Presario-CQ58-Notebook-PC kernel: [ 1099.954232] > ath: phy0: Failed to wakeup in 500us > Dec 10 22:17:10 hubert-Presario-CQ58-Notebook-PC kernel: [ 1100.494169] > ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff > AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff > Dec 10 22:17:10 hubert-Presario-CQ58-Notebook-PC kernel: [ 1100.494186] > ath: phy0: Could not stop RX, we could be confusing the DMA engine when we > start RX up > Dec 10 22:17:10 hubert-Presario-CQ58-Notebook-PC kernel: [ 1100.564164] > ath: phy0: Failed to stop TX DMA, queues=0x10f! > Dec 10 22:17:11 hubert-Presario-CQ58-Notebook-PC kernel: [ 1100.680471] > ath: phy0: Chip reset failed > Dec 10 22:17:11 hubert-Presario-CQ58-Notebook-PC kernel: [ 1100.680481] > ath: phy0: Unable to reset channel, reset status -22 > Dec 10 22:17:11 hubert-Presario-CQ58-Notebook-PC kernel: [ 1100.680521] > ath: phy0: Unable to set channel > > > The only way to recover is to reboot the PC... > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1016181 > > Title: > ath chip reset failed > > Status in “linux” package in Ubuntu: > Confirmed > > Bug description: > Since upgrading to U 12.04 i experience wireless lan drops. Sometimes > just a few minutes after system startup, sometimes after hours of > using my system. > > ProblemType: Bug > DistroRelease: Ubuntu 12.04 > Package: network-manager 0.9.4.0-0ubuntu4.1 > ProcVersionSignature: Ubuntu 3.2.0-25.40-generic-pae 3.2.18 > Uname: Linux 3.2.0-25-generic-pae i686 > ApportVersion: 2.0.1-0ubuntu8 > Architecture: i386 > Date: Thu Jun 21 20:09:45 2012 > EcryptfsInUse: Yes > IfupdownConfig: > auto lo > iface lo inet loopback > InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Beta i386 > (20120328) > IpRoute: > default via 192.168.0.1 dev wlan0 proto static > 169.254.0.0/16 dev wlan0 scope link metric 1000 > 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.107 > metric 2 > NetworkManager.state: > [main] > NetworkingEnabled=true > WirelessEnabled=true > WWANEnabled=true > WimaxEnabled=true > ProcEnviron: > PATH=(custom, no user) > LANG=nl_NL.UTF-8 > SHELL=/bin/bash > RfKill: > 0: phy0: Wireless LAN > Soft blocked: no > Hard blocked: no > SourcePackage: network-manager > UpgradeStatus: No upgrade log present (probably fresh install) > nmcli-dev: > DEVICE TYPE STATE DBUS-PATH > eth0 802-3-ethernet unavailable > /org/freedesktop/NetworkManager/Devices/1 > wlan0 802-11-wireless connected > /org/freedesktop/NetworkManager/Devices/0 > nmcli-nm: > RUNNING VERSION STATE NET-ENABLED WIFI-HARDWARE > WIFI WWAN-HARDWARE WWAN > running 0.9.4.0 connected enabled enabled > enabled enabled disabled > --- > AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. > ApportVersion: 2.0.1-0ubuntu8 > Architecture: i386 > ArecordDevices: > **** List of CAPTURE Hardware Devices **** > card 0: SB [HDA ATI SB], device 0: ALC663 Analog [ALC663 Analog] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > AudioDevicesInUse: > USER PID ACCESS COMMAND > /dev/snd/controlC1: evertjan 2007 F.... pulseaudio > /dev/snd/controlC0: evertjan 2007 F.... pulseaudio > /dev/snd/pcmC0D0p: evertjan 2007 F...m pulseaudio > Card0.Amixer.info: > Card hw:0 'SB'/'HDA ATI SB at 0xfdaf4000 irq 16' > Mixer name : 'Realtek ALC663' > Components : 'HDA:10ec0663,104319d3,00100001 > HDA:11c11040,10431636,00100200' > Controls : 22 > Simple ctrls : 11 > Card1.Amixer.info: > Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfddec000 irq 46' > Mixer name : 'ATI R6xx HDMI' > Components : 'HDA:1002aa01,00aa0100,00100000' > Controls : 6 > Simple ctrls : 1 > Card1.Amixer.values: > Simple mixer control 'IEC958',0 > Capabilities: pswitch pswitch-joined penum > Playback channels: Mono > Mono: Playback [on] > DistroRelease: Ubuntu 12.04 > EcryptfsInUse: Yes > InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Beta i386 > (20120328) > MachineType: ASUSTeK Computer Inc. M51Tr > Package: linux (not installed) > ProcEnviron: > TERM=xterm > PATH=(custom, no user) > LANG=nl_NL.UTF-8 > SHELL=/bin/bash > ProcFB: > 0 radeondrmfb > 1 radeondrmfb > ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-25-generic-pae > root=UUID=6fe2c425-9ea3-46b9-b691-7f524e3e02e6 ro quiet splash vt.handoff=7 > ProcVersionSignature: Ubuntu 3.2.0-25.40-generic-pae 3.2.18 > RelatedPackageVersions: > linux-restricted-modules-3.2.0-25-generic-pae N/A > linux-backports-modules-3.2.0-25-generic-pae N/A > linux-firmware 1.79 > RfKill: > 0: phy0: Wireless LAN > Soft blocked: no > Hard blocked: no > SourcePackage: linux > Tags: precise precise > Uname: Linux 3.2.0-25-generic-pae i686 > UpgradeStatus: No upgrade log present (probably fresh install) > UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo > dmi.bios.date: 03/11/2009 > dmi.bios.vendor: American Megatrends Inc. > dmi.bios.version: 208 > dmi.board.asset.tag: ATN12345678901234567 > dmi.board.name: M51Tr > dmi.board.vendor: PEGATRON CORPORATION > dmi.board.version: 1.0 > dmi.chassis.type: 10 > dmi.chassis.vendor: ASUSTeK Computer Inc. > dmi.modalias: > dmi:bvnAmericanMegatrendsInc.:bvr208:bd03/11/2009:svnASUSTeKComputerInc.:pnM51Tr:pvr1.0:rvnPEGATRONCORPORATION:rnM51Tr:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr: > dmi.product.name: M51Tr > dmi.product.version: 1.0 > dmi.sys.vendor: ASUSTeK Computer Inc. > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1016181/+subscriptions > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1016181 Title: ath chip reset failed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1016181/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
