Hi all, My configuration: MacBook Pro 15" late 2011 (8,2), ubuntu 12.04 32bit. Sd card tested: sandisk extreme 32gb 45mb/s (sdhc I).
Kernels tried: 3.2 - does not work (1.8 voltage error as first post..) 3.5 - does not work as above 3.10.17: it worked the first time (after a couple of second, as in comment #28), but never worked again, with the following in dmesg: [ 67.912335] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 67.920017] mmcblk0: mmc0:aaaa SU32G 29.7 GiB [ 77.940120] mmc0: Timeout waiting for hardware interrupt. [ 77.940160] ------------[ cut here ]------------ [ 77.940176] WARNING: CPU: 6 PID: 0 at /home/apw/COD/linux/drivers/mmc/host/sdhci.c:990 sdhci_send_command+0x1c3/0x200 [sdhci]() [ 77.940177] Modules linked in: mmc_block(+) hid_magicmouse hidp ip6table_filter ip6_tables iptable_filter ip_tables x_tables pci_stub vboxpci(OF) vboxnetadp(OF) vboxnetflt(OF) vboxdrv(OF) bnep rfcomm parport_pc ppdev snd_hda_codec_hdmi uvcvideo lib80211_crypt_tkip snd_hda_codec_cirrus videobuf2_core joydev videodev videobuf2_vmalloc btusb bcm5974 snd_hda_intel videobuf2_memops bluetooth snd_hda_codec fglrx(POF) snd_seq_midi hid_appleir snd_hwdep wl(POF) snd_rawmidi snd_pcm snd_seq_midi_event applesmc snd_seq input_polldev snd_timer snd_seq_device dm_multipath scsi_dh cfg80211 binfmt_misc snd soundcore snd_page_alloc mei_me lpc_ich lib80211 mei apple_gmux apple_bl mac_hid lp parport dm_mirror dm_region_hash dm_log hid_generic hid_apple usbhid hid tg3 firewire_ohci firewire_core sdhci_pci ptp crc_itu_t sdhci pps_core video [ 77.940219] CPU: 6 PID: 0 Comm: swapper/6 Tainted: PF O 3.11.6-031106-generic #201310181453 [ 77.940221] Hardware name: Apple Inc. MacBookPro8,2/Mac-94245A3940C91C80, BIOS MBP81.88Z.0047.B27.1201241646 01/24/12 [ 77.940223] 00000000 00000000 f771fe8c c164ccef f84653a8 f771febc c10554f4 c1843314 [ 77.940228] 00000006 00000000 f84653a8 000003de f8463e23 f8463e23 f6e78300 ecaba4c4 [ 77.940234] ecaba490 f771fecc c1055532 00000009 00000000 f771feec f8463e23 f6c94864 [ 77.940239] Call Trace: [ 77.940245] [<c164ccef>] dump_stack+0x41/0x52 [ 77.940251] [<c10554f4>] warn_slowpath_common+0x84/0xa0 [ 77.940257] [<f8463e23>] ? sdhci_send_command+0x1c3/0x200 [sdhci] [ 77.940261] [<f8463e23>] ? sdhci_send_command+0x1c3/0x200 [sdhci] [ 77.940264] [<c1055532>] warn_slowpath_null+0x22/0x30 [ 77.940269] [<f8463e23>] sdhci_send_command+0x1c3/0x200 [sdhci] [ 77.940273] [<f8463f19>] sdhci_finish_data+0xb9/0x130 [sdhci] [ 77.940278] [<f846400f>] sdhci_timeout_timer+0x7f/0xc0 [sdhci] [ 77.940283] [<c10610af>] call_timer_fn+0x2f/0x110 [ 77.940287] [<f8463f90>] ? sdhci_finish_data+0x130/0x130 [sdhci] [ 77.940290] [<c1061f31>] run_timer_softirq+0x1e1/0x210 [ 77.940295] [<c108e8a9>] ? rebalance_domains+0x89/0x150 [ 77.940300] [<f8463f90>] ? sdhci_finish_data+0x130/0x130 [sdhci] [ 77.940303] [<c1059d90>] ? local_bh_enable_ip+0x90/0x90 [ 77.940306] [<c1059e39>] __do_softirq+0xa9/0x200 [ 77.940309] [<c1059d90>] ? local_bh_enable_ip+0x90/0x90 [ 77.940310] <IRQ> [<c105a0d6>] ? irq_exit+0x76/0xa0 [ 77.940316] [<c165f0e8>] ? smp_apic_timer_interrupt+0x38/0x50 [ 77.940319] [<c16574ec>] ? apic_timer_interrupt+0x34/0x3c [ 77.940323] [<c15244b9>] ? cpuidle_enter_state+0x49/0x100 [ 77.940326] [<c152460b>] ? cpuidle_idle_call+0x9b/0x1e0 [ 77.940329] [<c101811d>] ? arch_cpu_idle+0xd/0x30 [ 77.940332] [<c10a4bc6>] ? cpu_idle_loop+0x46/0x1f0 [ 77.940335] [<c10a4dce>] ? cpu_startup_entry+0x5e/0x60 [ 77.940339] [<c103a057>] ? start_secondary+0xd7/0xf0 [ 77.940341] ---[ end trace 84052d66dc5d28fb ]--- [ 87.951622] mmc0: Timeout waiting for hardware interrupt. [ 97.963063] mmc0: Timeout waiting for hardware interrupt. [ 97.963199] mmcblk0: error -110 sending status command, retrying [ 107.974527] mmc0: Timeout waiting for hardware interrupt. [ 107.974713] mmcblk0: error -110 sending status command, retrying [ 117.985956] mmc0: Timeout waiting for hardware interrupt. [ 117.986109] mmcblk0: error -110 sending status command, aborting [ 117.986123] end_request: I/O error, dev mmcblk0, sector 0 [ 117.986129] quiet_error: 66 callbacks suppressed [ 117.986136] Buffer I/O error on device mmcblk0, logical block 0 [ 127.997439] mmc0: Timeout waiting for hardware interrupt. 3.11.6: same as before, but NOW, after many many tries, I got the sd card recognized, but not mounted. dmesg: [ 1262.395124] mmc0: Skipping voltage switch [ 1264.087094] mmc0: new high speed SDHC card at address aaaa [ 1264.087377] mmcblk0: mmc0:aaaa SU32G 29.7 GiB [ 1264.098012] mmcblk0: p1 I see the card in nautilus, but if I click on it, it doesn't mount it (and it doesn't give any sort of error). any help appreciated. thanks! mic -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1101883 Title: 14e4:16bc Sandisk Extreme 32GB Class 10 45MB/s not readable in Acer Aspire V3-571G-9686 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1101883/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
