Also, could you enable the following (will reset on reboot) echo 'module dvb_core +p' | sudo tee /sys/kernel/debug/dynamic_debug/control
this enables debugging of dvb_core, you will notice that dmesg says many things more regarding dvb that could help Am Dienstag, 14. Januar 2014, 18:31:08 schrieben Sie: > Sure I can do that: > > dmesg log: > [ 15.894763] usb 2-1.1: new low-speed USB device number 7 using ehci-pci > [ 15.994984] usb 2-1.1: New USB device found, idVendor=045e, > idProduct=00e1 [ 15.994996] usb 2-1.1: New USB device strings: Mfr=1, > Product=2, SerialNumber=0 [ 15.995005] usb 2-1.1: Product: Microsoft > Notebook Receiver v2.0 [ 15.995013] usb 2-1.1: Manufacturer: Microsoft > [ 16.007331] input: Microsoft Microsoft Notebook Receiver v2.0 as > /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input17 [ > 16.007703] hid-generic 0003:045E:00E1.0003: input,hidraw2: USB HID v1.11 > Mouse [Microsoft Microsoft Notebook Receiver v2.0] on > usb-0000:00:1d.0-1.1/input0 [ 213.223678] usb 2-1.3: new high-speed USB > device number 8 using ehci-pci [ 213.316395] usb 2-1.3: New USB device > found, idVendor=1554, idProduct=5010 [ 213.316404] usb 2-1.3: New USB > device strings: Mfr=1, Product=2, SerialNumber=3 [ 213.316410] usb 2-1.3: > Product: STK807X > [ 213.316414] usb 2-1.3: Manufacturer: DiBcom > [ 213.316419] usb 2-1.3: SerialNumber: 016 > [ 213.410882] dvb-usb: found a 'Prolink Pixelview SBTVD' in cold state, > will try to load a firmware [ 213.411448] dvb-usb: downloading firmware > from file 'dvb-usb-dib0700-1.20.fw' [ 213.613677] dib0700: firmware > started successfully. > [ 214.116168] dvb-usb: found a 'Prolink Pixelview SBTVD' in warm state. > [ 214.116273] dvb-usb: will pass the complete MPEG2 transport stream to the > software demuxer. [ 214.116463] DVB: registering new adapter (Prolink > Pixelview SBTVD) [ 214.378670] usb 2-1.3: DVB: registering adapter 0 > frontend 0 (DiBcom 8000 ISDB-T)... [ 214.611976] DiB0070: successfully > identified > [ 214.639941] Registered IR keymap rc-dib0700-nec > [ 214.640122] input: IR-receiver inside an USB DVB receiver as > /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/rc/rc0/input18 [ > 214.640249] rc0: IR-receiver inside an USB DVB receiver as > /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/rc/rc0 [ 214.640478] > dvb-usb: schedule remote query interval to 50 msecs. [ 214.640487] > dvb-usb: Prolink Pixelview SBTVD successfully initialized and connected. [ > 214.640792] usbcore: registered new interface driver dvb_usb_dib0700 > > I started Kaffeine from a terminal, and I got the following logs when I > tried to scan channels. Kaffeine output: > kaffeine(4116) DvbLinuxDevice::tune: ioctl FE_SET_FRONTEND failed for > frontend "/dev/dvb/adapter0/frontend0" kaffeine(4116) DvbLinuxDevice::tune: > ioctl FE_SET_FRONTEND failed for frontend "/dev/dvb/adapter0/frontend0" > kaffeine(4116) DvbLinuxDevice::tune: ioctl FE_SET_FRONTEND failed for > frontend "/dev/dvb/adapter0/frontend0" kaffeine(4116) DvbLinuxDevice::tune: > ioctl FE_SET_FRONTEND failed for frontend "/dev/dvb/adapter0/frontend0" > > And also for each message that I received on the terminal, I got one of this > on syslog: usb 2-1.3: dtv_property_cache_sync: doesn't know how to handle a > DVBv3 call to delivery system 0 > > If you need something else, let me know. I will be happy to assist you. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1241842 Title: scanning with dvb s/s2 card broken To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/kaffeine/+bug/1241842/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
