after I enabled the debug parameters I got this on dmesg: [ 300.732288] usb 2-1.3: new high-speed USB device number 8 using ehci-pci [ 300.825132] usb 2-1.3: New USB device found, idVendor=1554, idProduct=5010 [ 300.825141] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 300.825146] usb 2-1.3: Product: STK807X [ 300.825151] usb 2-1.3: Manufacturer: DiBcom [ 300.825156] usb 2-1.3: SerialNumber: 016 [ 300.912446] dvb-usb: found a 'Prolink Pixelview SBTVD' in cold state, will try to load a firmware [ 300.912962] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 301.116022] dib0700: firmware started successfully. [ 301.616674] dvb-usb: found a 'Prolink Pixelview SBTVD' in warm state. [ 301.616799] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 301.616912] DVB: registering new adapter (Prolink Pixelview SBTVD) [ 301.617400] DVB: register adapter0/demux0 @ minor: 0 (0x00) [ 301.617529] DVB: register adapter0/dvr0 @ minor: 1 (0x01) [ 301.617656] DVB: register adapter0/net0 @ minor: 2 (0x02) [ 301.879000] usb 2-1.3: DVB: registering adapter 0 frontend 0 (DiBcom 8000 ISDB-T)... [ 301.879246] DVB: register adapter0/frontend0 @ minor: 3 (0x03) [ 302.112536] DiB0070: successfully identified [ 302.144490] Registered IR keymap rc-dib0700-nec [ 302.144706] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/rc/rc0/input18 [ 302.144921] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/rc/rc0 [ 302.145219] dvb-usb: schedule remote query interval to 50 msecs. [ 302.145228] dvb-usb: Prolink Pixelview SBTVD successfully initialized and connected. [ 302.145643] usbcore: registered new interface driver dvb_usb_dib0700 [ 370.381316] function : dvb_dvr_open [ 370.419020] usb 2-1.3: dtv_property_cache_sync: doesn't know how to handle a DVBv3 call to delivery system 0 [ 370.422835] usb 2-1.3: dtv_property_cache_sync: doesn't know how to handle a DVBv3 call to delivery system 0 [ 370.426003] usb 2-1.3: dtv_property_cache_sync: doesn't know how to handle a DVBv3 call to delivery system 0 [ 370.430621] usb 2-1.3: dtv_property_cache_sync: doesn't know how to handle a DVBv3 call to delivery system 0 [ 370.434731] usb 2-1.3: dtv_property_cache_sync: doesn't know how to handle a DVBv3 call to delivery system 0
the debugfs was already mounted here, which file do you need from that folder? -- You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to kaffeine in Ubuntu. https://bugs.launchpad.net/bugs/1241842 Title: scanning with dvb s/s2 card broken To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/kaffeine/+bug/1241842/+subscriptions -- kubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
