Hello, Thanks for your prompt response and analysis.
I will try getting some DVD-R instead of +R and see if that works. The burner is about eight years old, it has been great, maybe it's finally giving out. Thank you again RFD On Jul 5, 2016 6:35 AM, "Thomas Schmitt" <[email protected]> wrote: > Hi, > > > growisofs > > ... > > :-[ WRITE@LBA=220h failed with SK=3h/WRITE ERROR]: Input/output error > > Regrettably it does not tell the additional info numbers ASC and ASCQ. > But SK=3 means that the drive cannot write to the medium because of > unexpected problems. I.e. not because the DVD would not be writable by > its type and state. > > "220h" means that the drive raised protest after growisofs sent it the > first 544 blocks = 1,114,112 bytes. This is well within the size of the > drive buffer. So one may assume that the drive was not able to write > any data with sufficient quality. > > If other burn programs (e.g. my libburn) yield better success, then this > would either be because mere luck, or because a different write method was > used. Write methods depend on the DVD type, e.g. DVD-R offers DAO and > Incremental, DVD+R offers writing with or without track reservation. > The growisofs run did not require DAO. But it is not obvious whether DVD-R > or DVD+R was in use. > > Whatever, a first try of remedy would be to buy some new DVD media of > the other type as the one used before. E.g. DVD-R if your failure was with > DVD+R. If this helps, try newly bought DVD of the type and manufacturer > that failed before. > > If not the failing old DVD media turn out to be just bad while all newly > bought DVD work fine, then it is time to consider replacing the burner > drive. > > Have a nice day :) > > Thomas > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1598868 > > Title: > growisofs bug > > Status in dvd+rw-tools package in Ubuntu: > New > > Bug description: > I am using K3b to burn data DVD's. I have been using the program for > years with no problems. But now, the program will not burn data > DVk3bD's. It claims to be 'flushing the cache' which I have never seen > before. it then cancels without writing anything. > > Here is the debugging report: > > Burned media > ----------------------- > DVD+R > > Devices > ----------------------- > ASUS SDRW-08D1S-U 1.02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, > DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, > DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW > Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, > CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, > RAW/R96R, Restricted Overwrite, Layer Jump] [%7] > > K3b::IsoImager > ----------------------- > mkisofs print size result: 789478 (1616850944 bytes) > > System > ----------------------- > K3b Version: 2.0.2 > KDE Version: 4.13.3 > QT Version: 4.8.6 > Kernel: 3.19.0-64-generic > > Used versions > ----------------------- > mkisofs: 1.1.11 > growisofs: 7.1 > > growisofs > ----------------------- > Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0' > /dev/sr0: "Current Write Speed" is 8.2x1352KBps. > :-[ WRITE@LBA=220h failed with SK=3h/WRITE ERROR]: Input/output error > :-( write failed: Input/output error > /dev/sr0: flushing cache > > growisofs command: > ----------------------- > /usr/bin/growisofs -Z /dev/sr0=/dev/fd/0 -use-the-force-luke=notray > -use-the-force-luke=tty -use-the-force-luke=4gms > -use-the-force-luke=tracksize:789478 -speed=8 > -use-the-force-luke=bufsize:32m > > mkisofs > ----------------------- > 789478 > I: -input-charset not specified, using utf-8 (detected in locale > settings) > 0.06% done, estimate finish Mon Jul 4 10:22:18 2016 > 0.13% done, estimate finish Mon Jul 4 10:22:18 2016 > 0.19% done, estimate finish Mon Jul 4 10:22:18 2016 > 0.25% done, estimate finish Mon Jul 4 10:22:18 2016 > 0.32% done, estimate finish Mon Jul 4 10:22:18 2016 > 0.38% done, estimate finish Mon Jul 4 10:22:18 2016 > 0.44% done, estimate finish Mon Jul 4 10:22:18 2016 > 0.51% done, estimate finish Mon Jul 4 10:22:18 2016 > 0.57% done, estimate finish Mon Jul 4 10:22:18 2016 > 0.63% done, estimate finish Mon Jul 4 10:22:18 2016 > 0.70% done, estimate finish Mon Jul 4 10:22:18 2016 > 0.76% done, estimate finish Mon Jul 4 10:22:18 2016 > 0.82% done, estimate finish Mon Jul 4 10:22:18 2016 > 0.89% done, estimate finish Mon Jul 4 10:22:18 2016 > 0.95% done, estimate finish Mon Jul 4 10:22:18 2016 > 1.01% done, estimate finish Mon Jul 4 10:22:18 2016 > 1.08% done, estimate finish Mon Jul 4 10:23:50 2016 > 1.14% done, estimate finish Mon Jul 4 10:23:45 2016 > 1.20% done, estimate finish Mon Jul 4 10:23:41 2016 > 1.27% done, estimate finish Mon Jul 4 10:23:36 2016 > 1.33% done, estimate finish Mon Jul 4 10:23:33 2016 > 1.39% done, estimate finish Mon Jul 4 10:23:29 2016 > 1.46% done, estimate finish Mon Jul 4 10:23:26 2016 > 1.52% done, estimate finish Mon Jul 4 10:23:23 2016 > 1.58% done, estimate finish Mon Jul 4 10:23:21 2016 > 1.65% done, estimate finish Mon Jul 4 10:23:18 2016 > 1.71% done, estimate finish Mon Jul 4 10:23:16 2016 > 1.77% done, estimate finish Mon Jul 4 10:23:14 2016 > 1.84% done, estimate finish Mon Jul 4 10:23:12 2016 > 1.90% done, estimate finish Mon Jul 4 10:23:10 2016 > 1.96% done, estimate finish Mon Jul 4 10:23:08 2016 > 2.03% done, estimate finish Mon Jul 4 10:23:07 2016 > 2.09% done, estimate finish Mon Jul 4 10:23:05 2016 > > mkisofs calculate size command: > ----------------------- > /usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid K3b > data project -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN > TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 > -volset-seqno 1 -sort /tmp/kde-robert/k3bcF2851.tmp -rational-rock > -hide-list /tmp/kde-robert/k3bcS2851.tmp -joliet -joliet-long > -hide-joliet-list /tmp/kde-robert/k3bVs2851.tmp -no-cache-inodes > -full-iso9660-filenames -iso-level 3 -path-list > /tmp/kde-robert/k3baq2851.tmp > > mkisofs command: > ----------------------- > /usr/bin/genisoimage -gui -graft-points -volid K3b data project -volset > -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK > -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort > /tmp/kde-robert/k3bGS2851.tmp -rational-rock -hide-list > /tmp/kde-robert/k3btQ2851.tmp -joliet -joliet-long -hide-joliet-list > /tmp/kde-robert/k3bmn2851.tmp -no-cache-inodes -full-iso9660-filenames > -iso-level 3 -path-list /tmp/kde-robert/k3bbh2851.tmp > > I believe the problem lies in the growisofs program, for I have tried > other burning programs and the same thing occurs > > To manage notifications about this bug go to: > > https://bugs.launchpad.net/ubuntu/+source/dvd+rw-tools/+bug/1598868/+subscriptions > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1598868 Title: growisofs bug To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dvd+rw-tools/+bug/1598868/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
