Perhaps this is a new bug. Touchpad freeze after wakeup. Mouse works Here is a
copy of the syslog & dmesg
user-meir@adminmeir-Inspiron-3180:~$ dmesg
[ 0.000000] Linux version 5.3.0-25-generic (buildd@lgw01-amd64-036) (gcc
version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #27-Ubuntu SMP Wed Dec 4
13:36:32 UTC 2019 (Ubuntu 5.3.0-25.27-generic 5.3.13)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-25-generic
root=UUID=8b17e198-3430-4a53-9e4a-1da7d792458b ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes,
using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000086fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000087000-0x0000000000087fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d64b5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d64b6000-0x00000000d6db5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d6db6000-0x00000000e6fbefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e6fbf000-0x00000000e71befff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000e71bf000-0x00000000e78befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e78bf000-0x00000000e7bbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000e7bbf000-0x00000000e7bfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000e7bff000-0x00000000e7bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e7c00000-0x00000000e7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0800000-0x00000000f08fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000111ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000112000000-0x0000000116ffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by Dell Inc.
[ 0.000000] efi: ACPI 2.0=0xe7bfe014 SMBIOS=0xe726e000 SMBIOS
3.0=0xe726c000 ESRT=0xe726f718 MEMATTR=0xe4e06018
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: Dell Inc. Inspiron 3180/0918N8, BIOS 1.3.0 03/09/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1597.180 MHz processor
[ 0.000038] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000041] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000050] last_pfn = 0x112000 max_arch_pfn = 0x400000000
[ 0.000057] MTRR default type: uncachable
[ 0.000059] MTRR fixed ranges enabled:
[ 0.000060] 00000-9FFFF write-back
[ 0.000062] A0000-BFFFF uncachable
[ 0.000063] C0000-FFFFF write-through
[ 0.000064] MTRR variable ranges enabled:
[ 0.000066] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000068] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000070] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000071] 3 base 0000E0000000 mask FFFFF8000000 write-back
[ 0.000072] 4 base 0000FF800000 mask FFFFFF800000 write-protect
[ 0.000073] 5 disabled
[ 0.000074] 6 disabled
[ 0.000074] 7 disabled
[ 0.000076] TOM2: 0000000117000000 aka 4464M
[ 0.000378] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000507] last_pfn = 0xe7c00 max_arch_pfn = 0x400000000
[ 0.007596] esrt: Reserving ESRT space from 0x00000000e726f718 to
0x00000000e726f750.
[ 0.007611] check: Scanning 1 areas for low memory corruption
[ 0.007617] Using GB pages for direct mapping
[ 0.007620] BRK [0x57a01000, 0x57a01fff] PGTABLE
[ 0.007623] BRK [0x57a02000, 0x57a02fff] PGTABLE
[ 0.007624] BRK [0x57a03000, 0x57a03fff] PGTABLE
[ 0.007676] BRK [0x57a04000, 0x57a04fff] PGTABLE
[ 0.007678] BRK [0x57a05000, 0x57a05fff] PGTABLE
[ 0.007843] BRK [0x57a06000, 0x57a06fff] PGTABLE
[ 0.007897] BRK [0x57a07000, 0x57a07fff] PGTABLE
[ 0.007968] BRK [0x57a08000, 0x57a08fff] PGTABLE
[ 0.008086] BRK [0x57a09000, 0x57a09fff] PGTABLE
[ 0.008198] BRK [0x57a0a000, 0x57a0afff] PGTABLE
[ 0.008419] RAMDISK: [mem 0x324b7000-0x35252fff]
[ 0.008431] ACPI: Early table checksum verification disabled
[ 0.008436] ACPI: RSDP 0x00000000E7BFE014 000024 (v02 DELL )
[ 0.008441] ACPI: XSDT 0x00000000E7BCD188 0000EC (v01 DELL WN09
00000001 01000013)
[ 0.008450] ACPI: FACP 0x00000000E7BF8000 00010C (v05 DELL WN09
00000001 ASL 00040000)
[ 0.008458] ACPI: DSDT 0x00000000E7BE9000 00815D (v01 DELL WN09
00040000 ASL 00040000)
[ 0.008462] ACPI: FACS 0x00000000E7B83000 000040
[ 0.008465] ACPI: UEFI 0x00000000E7BFD000 000236 (v01 DELL WN09
00000001 ASL 00040000)
[ 0.008469] ACPI: SLIC 0x00000000E7BFC000 000176 (v01 DELL WN09
00000001 ASL 00040000)
[ 0.008473] ACPI: MSDM 0x00000000E7BFB000 000055 (v03 DELL WN09
00000001 ASL 00040000)
[ 0.008477] ACPI: ASF! 0x00000000E7BFA000 0000A5 (v32 DELL WN09
00000001 ASL 00040000)
[ 0.008480] ACPI: BOOT 0x00000000E7BF9000 000028 (v01 DELL WN09
00000001 ASL 00040000)
[ 0.008484] ACPI: HPET 0x00000000E7BF7000 000038 (v01 DELL WN09
00000001 ASL 00040000)
[ 0.008488] ACPI: APIC 0x00000000E7BF6000 000090 (v03 DELL WN09
00000001 ASL 00040000)
[ 0.008491] ACPI: MCFG 0x00000000E7BF5000 00003C (v01 DELL WN09
00000001 ASL 00040000)
[ 0.008494] ACPI: SLIC 0x00000000E7BF4000 000176 (v01 DELL WN09
00000001 ASL 00040000)
[ 0.008498] ACPI: WDAT 0x00000000E7BF3000 00017C (v01 DELL WN09
00000001 ASL 00040000)
[ 0.008502] ACPI: WDRT 0x00000000E7BF2000 000047 (v01 DELL WN09
00000000 ASL 00040000)
[ 0.008505] ACPI: UEFI 0x00000000E7BE8000 000042 (v01 DELL WN09
00000000 ASL 00040000)
[ 0.008508] ACPI: SSDT 0x00000000E7BE7000 00043C (v01 AMD Jadeite
00000001 ACPI 00040000)
[ 0.008512] ACPI: SSDT 0x00000000E7BE2000 004B5B (v02 AMD Jadeite
00000002 ACPI 00040000)
[ 0.008516] ACPI: IVRS 0x00000000E7BE1000 0000D0 (v02 DELL WN09
00000001 ASL 00040000)
[ 0.008520] ACPI: CRAT 0x00000000E7BE0000 0002E8 (v01 DELL WN09
00000001 ASL 00040000)
[ 0.008523] ACPI: VFCT 0x00000000E7BD0000 00FC84 (v01 DELL WN09
00000001 ASL 00040000)
[ 0.008527] ACPI: SSDT 0x00000000E7BCF000 000482 (v01 AMD Jadeite
00001000 ACPI 00040000)
[ 0.008530] ACPI: TPM2 0x00000000E7BCE000 000038 (v03 DELL WN09
00000002 ASL 00040000)
[ 0.008534] ACPI: SSDT 0x00000000E7BCC000 000174 (v01 AMD Jadeite
00000001 ACPI 00040000)
[ 0.008537] ACPI: SSDT 0x00000000E7BCA000 0015C5 (v01 AMD Jadeite
00000001 ACPI 00040000)
[ 0.008541] ACPI: SSDT 0x00000000E7BC8000 00165E (v01 AMD Jadeite
00000001 ACPI 00040000)
[ 0.008545] ACPI: FPDT 0x00000000E7BC7000 000044 (v01 DELL WN09
00000002 ASL 00040000)
[ 0.008548] ACPI: BGRT 0x00000000E7BC6000 000038 (v01 DELL WN09
00000001 ASL 00040000)
[ 0.008564] ACPI: Local APIC address 0xfee00000
[ 0.008717] No NUMA configuration found
[ 0.008718] Faking a node at [mem 0x0000000000000000-0x0000000111ffffff]
[ 0.008733] NODE_DATA(0) allocated [mem 0x111fd5000-0x111ffffff]
[ 0.009068] Zone ranges:
[ 0.009069] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.009071] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.009072] Normal [mem 0x0000000100000000-0x0000000111ffffff]
[ 0.009073] Device empty
[ 0.009074] Movable zone start for each node
[ 0.009077] Early memory node ranges
[ 0.009078] node 0: [mem 0x0000000000001000-0x0000000000086fff]
[ 0.009080] node 0: [mem 0x0000000000088000-0x000000000009ffff]
[ 0.009081] node 0: [mem 0x0000000000100000-0x00000000d64b5fff]
[ 0.009082] node 0: [mem 0x00000000d6db6000-0x00000000e6fbefff]
[ 0.009083] node 0: [mem 0x00000000e7bff000-0x00000000e7bfffff]
[ 0.009084] node 0: [mem 0x0000000100000000-0x0000000111ffffff]
[ 0.009159] Zeroed struct page in unavailable ranges: 6562 pages
[ 0.009162] Initmem setup node 0 [mem 0x0000000000001000-0x0000000111ffffff]
[ 0.009165] On node 0 totalpages: 1017438
[ 0.009166] DMA zone: 64 pages used for memmap
[ 0.009167] DMA zone: 23 pages reserved
[ 0.009168] DMA zone: 3998 pages, LIFO batch:0
[ 0.009245] DMA32 zone: 14683 pages used for memmap
[ 0.009246] DMA32 zone: 939712 pages, LIFO batch:63
[ 0.027371] Normal zone: 1152 pages used for memmap
[ 0.027372] Normal zone: 73728 pages, LIFO batch:15
[ 0.028799] ACPI: PM-Timer IO Port: 0x408
[ 0.028801] ACPI: Local APIC address 0xfee00000
[ 0.028810] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.028811] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.028812] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.028813] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.028822] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.028826] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[ 0.028829] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.028831] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.028833] ACPI: IRQ0 used by override.
[ 0.028834] ACPI: IRQ9 used by override.
[ 0.028836] Using ACPI (MADT) for SMP configuration information
[ 0.028838] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.028847] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.028879] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.028882] PM: Registered nosave memory: [mem 0x00087000-0x00087fff]
[ 0.028884] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.028885] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.028887] PM: Registered nosave memory: [mem 0xd64b6000-0xd6db5fff]
[ 0.028889] PM: Registered nosave memory: [mem 0xe6fbf000-0xe71befff]
[ 0.028890] PM: Registered nosave memory: [mem 0xe71bf000-0xe78befff]
[ 0.028891] PM: Registered nosave memory: [mem 0xe78bf000-0xe7bbefff]
[ 0.028892] PM: Registered nosave memory: [mem 0xe7bbf000-0xe7bfefff]
[ 0.028894] PM: Registered nosave memory: [mem 0xe7c00000-0xe7ffffff]
[ 0.028894] PM: Registered nosave memory: [mem 0xe8000000-0xf07fffff]
[ 0.028895] PM: Registered nosave memory: [mem 0xf0800000-0xf08fffff]
[ 0.028896] PM: Registered nosave memory: [mem 0xf0900000-0xf7ffffff]
[ 0.028897] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.028897] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.028898] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.028899] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.028900] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.028900] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[ 0.028901] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.028902] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[ 0.028902] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.028903] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.028904] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.028906] [mem 0xe8000000-0xf07fffff] available for PCI devices
[ 0.028908] Booting paravirtualized kernel on bare hardware
[ 0.028912] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.028921] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4
nr_node_ids:1
[ 0.029678] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.029688] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.029689] pcpu-alloc: [0] 0 1 2 3
[ 0.029732] Built 1 zonelists, mobility grouping on. Total pages: 1001516
[ 0.029733] Policy zone: Normal
[ 0.029735] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-25-generic
root=UUID=8b17e198-3430-4a53-9e4a-1da7d792458b ro quiet splash vt.handoff=7
[ 0.030820] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes, linear)
[ 0.031314] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes,
linear)
[ 0.031351] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.047385] Calgary: detecting Calgary via BIOS EBDA area
[ 0.047386] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.066182] Memory: 3814652K/4069752K available (14339K kernel code, 2388K
rwdata, 4728K rodata, 2668K init, 5056K bss, 255100K reserved, 0K cma-reserved)
[ 0.066481] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.066504] ftrace: allocating 43225 entries in 169 pages
[ 0.093175] rcu: Hierarchical RCU implementation.
[ 0.093179] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.093180] Tasks RCU enabled.
[ 0.093181] rcu: RCU calculated value of scheduler-enlistment delay is 25
jiffies.
[ 0.093182] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.097914] NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16
[ 0.098274] random: crng done (trusting CPU's manufacturer)
[ 0.098318] vt handoff: transparent VT on vt#7
[ 0.098328] Console: colour dummy device 80x25
[ 0.098334] printk: console [tty0] enabled
[ 0.098364] ACPI: Core revision 20190703
[ 0.098662] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 133484873504 ns
[ 0.098683] APIC: Switch to symmetric I/O mode setup
[ 0.122776] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.142680] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles:
0x1705bcf01d2, max_idle_ns: 440795214020 ns
[ 0.142688] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3194.36 BogoMIPS (lpj=6388720)
[ 0.142692] pid_max: default: 32768 minimum: 301
[ 0.146771] LSM: Security Framework initializing
[ 0.146787] Yama: becoming mindful.
[ 0.146833] AppArmor: AppArmor initialized
[ 0.146899] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes,
linear)
[ 0.146910] Mountpoint-cache hash table entries: 8192 (order: 4, 65536
bytes, linear)
[ 0.147139] *** VALIDATE proc ***
[ 0.147208] *** VALIDATE cgroup1 ***
[ 0.147210] *** VALIDATE cgroup2 ***
[ 0.147259] BIOS may not properly restore RDRAND after suspend, hiding
RDRAND via CPUID. Use rdrand=force to reenable.
[ 0.147327] LVT offset 1 assigned for vector 0xf9
[ 0.147337] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.147339] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.147344] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user
pointer sanitization
[ 0.147346] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.147347] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on
context switch
[ 0.147349] Speculative Store Bypass: Mitigation: Speculative Store Bypass
disabled via prctl and seccomp
[ 0.147591] Freeing SMP alternatives memory: 36K
[ 0.263385] smpboot: CPU0: AMD A6-9220e RADEON R4, 5 COMPUTE CORES 2C+3G
(family: 0x15, model: 0x70, stepping: 0x0)
[ 0.263588] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.263593] ... version: 0
[ 0.263594] ... bit width: 48
[ 0.263595] ... generic registers: 6
[ 0.263596] ... value mask: 0000ffffffffffff
[ 0.263597] ... max period: 00007fffffffffff
[ 0.263597] ... fixed-purpose events: 0
[ 0.263598] ... event mask: 000000000000003f
[ 0.263653] rcu: Hierarchical SRCU implementation.
[ 0.264480] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.264589] smp: Bringing up secondary CPUs ...
[ 0.264758] x86: Booting SMP configuration:
[ 0.264759] .... node #0, CPUs: #1
[ 0.266684] smp: Brought up 1 node, 2 CPUs
[ 0.266684] smpboot: Max logical packages: 2
[ 0.266684] smpboot: Total of 2 processors activated (6388.72 BogoMIPS)
[ 0.266978] devtmpfs: initialized
[ 0.266978] x86/mm: Memory block size: 128MB
[ 0.267358] PM: Registering ACPI NVS region [mem 0xe78bf000-0xe7bbefff]
(3145728 bytes)
[ 0.267358] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.267358] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.267358] pinctrl core: initialized pinctrl subsystem
[ 0.267358] PM: RTC time: 17:28:19, date: 2019-12-05
[ 0.267358] NET: Registered protocol family 16
[ 0.267358] audit: initializing netlink subsys (disabled)
[ 0.267358] audit: type=2000 audit(1575566898.148:1): state=initialized
audit_enabled=0 res=1
[ 0.267358] EISA bus registered
[ 0.267358] cpuidle: using governor ladder
[ 0.267358] cpuidle: using governor menu
[ 0.267358] Simple Boot Flag at 0x44 set to 0x80
[ 0.267358] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.267358] ACPI: bus type PCI registered
[ 0.267358] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.267358] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.267358] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.267358] PCI: Using configuration type 1 for base access
[ 0.271310] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.271310] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.274826] ACPI: Added _OSI(Module Device)
[ 0.274827] ACPI: Added _OSI(Processor Device)
[ 0.274828] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.274829] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.274830] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.274831] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.274833] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.286457] ACPI Warning: Type override - [EC0_] had invalid type (Integer)
for Scope operator, changed to type ANY (20190703/dswload2-192)
[ 0.287345] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.303076] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.435037] ACPI: Interpreter enabled
[ 0.435071] ACPI: (supports S0 S3 S4 S5)
[ 0.435073] ACPI: Using IOAPIC for interrupt routing
[ 0.435338] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.483123] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 0.489418] ACPI: Power Resource [P0U2] (off)
[ 0.489466] ACPI: Power Resource [P3U2] (off)
[ 0.489466] ACPI: Power Resource [P0U3] (off)
[ 0.489466] ACPI: Power Resource [P3U3] (off)
[ 0.543247] ACPI: Power Resource [P0ST] (on)
[ 0.543304] ACPI: Power Resource [P3ST] (on)
[ 0.544169] ACPI: Power Resource [P0SD] (off)
[ 0.544217] ACPI: Power Resource [P3SD] (off)
[ 0.616775] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.616784] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI HPX-Type3]
[ 0.617063] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug
LTR]
[ 0.617323] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER
PCIeCapability]
[ 0.617324] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS
configuration
[ 0.617344] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus
00-3f] only partially covers this bridge
[ 0.617743] PCI host bridge to bus 0000:00
[ 0.617745] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.617747] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.617749] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.617750] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff
window]
[ 0.617752] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff
window]
[ 0.617753] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff
window]
[ 0.617755] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff
window]
[ 0.617756] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff
window]
[ 0.617757] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff
window]
[ 0.617759] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff
window]
[ 0.617760] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff
window]
[ 0.617761] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff
window]
[ 0.617763] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff
window]
[ 0.617764] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff
window]
[ 0.617766] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff
window]
[ 0.617767] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xf7ffffff
window]
[ 0.617768] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff
window]
[ 0.617770] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.617782] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
[ 0.617901] pci 0000:00:00.2: [1022:1577] type 00 class 0x080600
[ 0.618030] pci 0000:00:01.0: [1002:98e4] type 00 class 0x030000
[ 0.618049] pci 0000:00:01.0: reg 0x10: [mem 0xe8000000-0xefffffff 64bit
pref]
[ 0.618057] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit
pref]
[ 0.618063] pci 0000:00:01.0: reg 0x20: [io 0x2000-0x20ff]
[ 0.618069] pci 0000:00:01.0: reg 0x24: [mem 0xf0b00000-0xf0b3ffff]
[ 0.618075] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.618079] pci 0000:00:01.0: enabling Extended Tags
[ 0.618089] pci 0000:00:01.0: BAR 0: assigned to efifb
[ 0.618122] pci 0000:00:01.0: supports D1 D2
[ 0.618123] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.618235] pci 0000:00:01.1: [1002:15b3] type 00 class 0x040300
[ 0.618250] pci 0000:00:01.1: reg 0x10: [mem 0xf0b60000-0xf0b63fff 64bit]
[ 0.618274] pci 0000:00:01.1: enabling Extended Tags
[ 0.618306] pci 0000:00:01.1: supports D1 D2
[ 0.618395] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
[ 0.618506] pci 0000:00:02.5: [1022:157c] type 01 class 0x060400
[ 0.618699] pci 0000:00:02.5: enabling Extended Tags
[ 0.618743] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
[ 0.618849] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
[ 0.618964] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
[ 0.618978] pci 0000:00:08.0: reg 0x10: [mem 0xf0b40000-0xf0b5ffff 64bit
pref]
[ 0.618983] pci 0000:00:08.0: reg 0x18: [mem 0xf0900000-0xf09fffff]
[ 0.618988] pci 0000:00:08.0: reg 0x1c: [mem 0xf0b6f000-0xf0b6ffff]
[ 0.618996] pci 0000:00:08.0: reg 0x24: [mem 0xf0b6a000-0xf0b6bfff]
[ 0.619112] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
[ 0.619214] pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
[ 0.619226] pci 0000:00:09.2: reg 0x10: [mem 0xf0b64000-0xf0b67fff]
[ 0.619265] pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
[ 0.619375] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
[ 0.619404] pci 0000:00:10.0: reg 0x10: [mem 0xf0b68000-0xf0b69fff 64bit]
[ 0.619514] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.619628] pci 0000:00:11.0: [1022:7901] type 00 class 0x010601
[ 0.619648] pci 0000:00:11.0: reg 0x10: [io 0x2118-0x211f]
[ 0.619657] pci 0000:00:11.0: reg 0x14: [io 0x2124-0x2127]
[ 0.619666] pci 0000:00:11.0: reg 0x18: [io 0x2110-0x2117]
[ 0.619675] pci 0000:00:11.0: reg 0x1c: [io 0x2120-0x2123]
[ 0.619683] pci 0000:00:11.0: reg 0x20: [io 0x2100-0x210f]
[ 0.619692] pci 0000:00:11.0: reg 0x24: [mem 0xf0b6c000-0xf0b6c3ff]
[ 0.619732] pci 0000:00:11.0: PME# supported from D3hot
[ 0.619829] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
[ 0.620674] pci 0000:00:12.0: reg 0x10: [mem 0xf0b6d000-0xf0b6d0ff]
[ 0.623137] pci 0000:00:12.0: supports D1 D2
[ 0.623138] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.623235] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.623383] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.623538] pci 0000:00:18.0: [1022:15b0] type 00 class 0x060000
[ 0.623633] pci 0000:00:18.1: [1022:15b1] type 00 class 0x060000
[ 0.623721] pci 0000:00:18.2: [1022:15b2] type 00 class 0x060000
[ 0.623817] pci 0000:00:18.3: [1022:15b3] type 00 class 0x060000
[ 0.623909] pci 0000:00:18.4: [1022:15b4] type 00 class 0x060000
[ 0.623994] pci 0000:00:18.5: [1022:15b5] type 00 class 0x060000
[ 0.624144] pci 0000:01:00.0: [168c:0036] type 00 class 0x028000
[ 0.624173] pci 0000:01:00.0: reg 0x10: [mem 0xf0a00000-0xf0a7ffff 64bit]
[ 0.624216] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.624283] pci 0000:01:00.0: supports D1 D2
[ 0.624284] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.624384] pci 0000:00:02.5: PCI bridge to [bus 01]
[ 0.624390] pci 0000:00:02.5: bridge window [mem 0xf0a00000-0xf0afffff]
[ 0.625307] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.625429] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.625525] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.625643] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.625751] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.625839] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.625927] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.626015] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 6 10 11) *0, disabled.
[ 0.658944] SCSI subsystem initialized
[ 0.658963] libata version 3.00 loaded.
[ 0.658963] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.658963] pci 0000:00:01.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.658963] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.658963] vgaarb: loaded
[ 0.658963] ACPI: bus type USB registered
[ 0.658963] usbcore: registered new interface driver usbfs
[ 0.658963] usbcore: registered new interface driver hub
[ 0.658963] usbcore: registered new device driver usb
[ 0.707383] pps_core: LinuxPPS API ver. 1 registered
[ 0.707385] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 0.707389] PTP clock support registered
[ 0.707467] EDAC MC: Ver: 3.0.0
[ 0.707467] Registered efivars operations
[ 0.707467] PCI: Using ACPI for IRQ routing
[ 0.708718] PCI: pci_cache_line_size set to 64 bytes
[ 0.708767] e820: reserve RAM buffer [mem 0x00087000-0x0008ffff]
[ 0.708769] e820: reserve RAM buffer [mem 0xd64b6000-0xd7ffffff]
[ 0.708770] e820: reserve RAM buffer [mem 0xe6fbf000-0xe7ffffff]
[ 0.708772] e820: reserve RAM buffer [mem 0xe7c00000-0xe7ffffff]
[ 0.708773] e820: reserve RAM buffer [mem 0x112000000-0x113ffffff]
[ 0.708907] NetLabel: Initializing
[ 0.708908] NetLabel: domain hash size = 128
[ 0.708909] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.708934] NetLabel: unlabeled traffic allowed by default
[ 0.708966] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.708966] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.711712] clocksource: Switched to clocksource tsc-early
[ 0.730246] VFS: Disk quotas dquot_6.6.0
[ 0.730273] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.730314] *** VALIDATE hugetlbfs ***
[ 0.730444] AppArmor: AppArmor Filesystem Enabled
[ 0.730486] pnp: PnP ACPI init
[ 0.730784] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[ 0.730787] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.730789] system 00:00: [mem 0xf0800000-0xf08fffff] has been reserved
[ 0.730796] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.730986] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.731024] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.731050] pnp 00:03: Plug and Play ACPI device, IDs DLL087e PNP0f13
(active)
[ 0.731103] system 00:04: [io 0x0400-0x04cf] has been reserved
[ 0.731105] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.731107] system 00:04: [io 0x04d6] has been reserved
[ 0.731109] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.731110] system 00:04: [io 0x0c14] has been reserved
[ 0.731112] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.731114] system 00:04: [io 0x0c6c] has been reserved
[ 0.731116] system 00:04: [io 0x0c6f] has been reserved
[ 0.731117] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 0.731122] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.731221] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.731224] system 00:05: [mem 0xff800000-0xffffffff] has been reserved
[ 0.731228] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.753799] pnp: PnP ACPI: found 6 devices
[ 0.755704] thermal_sys: Registered thermal governor 'fair_share'
[ 0.755705] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.755706] thermal_sys: Registered thermal governor 'step_wise'
[ 0.755707] thermal_sys: Registered thermal governor 'user_space'
[ 0.755708] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.760221] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.760270] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff
pref]: no compatible bridge window
[ 0.760274] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff
pref]: no compatible bridge window
[ 0.760298] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0b80000-0xf0b9ffff
pref]
[ 0.760301] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0a80000-0xf0a8ffff
pref]
[ 0.760304] pci 0000:00:02.5: PCI bridge to [bus 01]
[ 0.760310] pci 0000:00:02.5: bridge window [mem 0xf0a00000-0xf0afffff]
[ 0.760319] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.760321] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.760322] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.760324] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.760325] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.760327] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.760328] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.760330] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.760331] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.760332] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.760334] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.760335] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.760336] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.760338] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.760339] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.760341] pci_bus 0000:00: resource 19 [mem 0xe8000000-0xf7ffffff window]
[ 0.760342] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff window]
[ 0.760344] pci_bus 0000:01: resource 1 [mem 0xf0a00000-0xf0afffff]
[ 0.760469] NET: Registered protocol family 2
[ 0.760681] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3,
32768 bytes, linear)
[ 0.760753] TCP established hash table entries: 32768 (order: 6, 262144
bytes, linear)
[ 0.760903] TCP bind hash table entries: 32768 (order: 7, 524288 bytes,
linear)
[ 0.760962] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.761043] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.761093] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.761242] NET: Registered protocol family 1
[ 0.761252] NET: Registered protocol family 44
[ 0.761268] pci 0000:00:01.0: disabling ATS (broken on this device)
[ 0.761276] pci 0000:00:01.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.761285] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[ 0.772569] pci 0000:00:10.0: quirk_usb_early_handoff+0x0/0x662 took 10991
usecs
[ 0.772571] pci 0000:00:10.0: PME# does not work under D0, disabling it
[ 0.789289] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x662 took 16307
usecs
[ 0.789317] PCI: CLS 64 bytes, default 64
[ 0.789393] Trying to unpack rootfs image as initramfs...
[ 0.992456] Freeing initrd memory: 46704K
[ 0.992508] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.992705] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.992707] pci 0000:00:00.2: PCI INT A: not connected
[ 0.992960] pci 0000:00:01.0: Adding to iommu group 0
[ 0.992980] pci 0000:00:01.0: Using iommu direct mapping
[ 0.992997] pci 0000:00:01.1: Adding to iommu group 0
[ 0.993049] pci 0000:00:02.0: Adding to iommu group 1
[ 0.993083] pci 0000:00:02.5: Adding to iommu group 1
[ 0.993158] pci 0000:00:03.0: Adding to iommu group 2
[ 0.993252] pci 0000:00:08.0: Adding to iommu group 3
[ 0.993333] pci 0000:00:09.0: Adding to iommu group 4
[ 0.993350] pci 0000:00:09.2: Adding to iommu group 4
[ 0.993439] pci 0000:00:10.0: Adding to iommu group 5
[ 0.993527] pci 0000:00:11.0: Adding to iommu group 6
[ 0.993595] pci 0000:00:12.0: Adding to iommu group 7
[ 0.993696] pci 0000:00:14.0: Adding to iommu group 8
[ 0.993715] pci 0000:00:14.3: Adding to iommu group 8
[ 0.993817] pci 0000:00:18.0: Adding to iommu group 9
[ 0.993839] pci 0000:00:18.1: Adding to iommu group 9
[ 0.993859] pci 0000:00:18.2: Adding to iommu group 9
[ 0.993877] pci 0000:00:18.3: Adding to iommu group 9
[ 0.993896] pci 0000:00:18.4: Adding to iommu group 9
[ 0.993914] pci 0000:00:18.5: Adding to iommu group 9
[ 0.993930] pci 0000:01:00.0: Adding to iommu group 1
[ 0.994512] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 0.994514] pci 0000:00:00.2: AMD-Vi: Extended features (0x37ef22294ada):
[ 0.994516] PPR NX GT IA GA PC GA_vAPIC
[ 0.994520] AMD-Vi: Interrupt remapping enabled
[ 0.994521] AMD-Vi: Virtual APIC enabled
[ 0.994688] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.996838] LVT offset 0 assigned for vector 0x400
[ 0.996882] perf: AMD IBS detected (0x000007ff)
[ 0.996888] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.996964] check: Scanning for low memory corruption every 60 seconds
[ 0.999694] Initialise system trusted keyrings
[ 0.999707] Key type blacklist registered
[ 0.999776] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.001622] zbud: loaded
[ 1.002141] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.002375] fuse: init (API version 7.31)
[ 1.002527] Platform Keyring initialized
[ 1.009862] Key type asymmetric registered
[ 1.009865] Asymmetric key parser 'x509' registered
[ 1.009888] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
244)
[ 1.009958] io scheduler mq-deadline registered
[ 1.010795] pcieport 0000:00:02.5: PME: Signaling with IRQ 26
[ 1.010883] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.010969] efifb: probing for efifb
[ 1.010996] efifb: showing boot graphics
[ 1.012092] efifb: framebuffer at 0xe8000000, using 4224k, total 4224k
[ 1.012094] efifb: mode is 1366x768x32, linelength=5632, pages=1
[ 1.012094] efifb: scrolling: redraw
[ 1.012096] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.012161] fbcon: Deferring console take-over
[ 1.012162] fb0: EFI VGA frame buffer device
[ 1.012606] ACPI: AC Adapter [AC] (on-line)
[ 1.012666] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.012676] ACPI: Power Button [PWRB]
[ 1.012733] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.012752] ACPI: Lid Switch [LID]
[ 1.012791] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.012800] ACPI: Sleep Button [SBTN]
[ 1.012839] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.012848] ACPI: Power Button [PWRF]
[ 1.097345] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.097348] ACPI: Thermal Zone [THM] (43 C)
[ 1.097660] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.099861] Linux agpgart interface v0.103
[ 1.100026] tpm_crb MSFT0101:00: can't request region for resource [mem
0xe7bba000-0xe7bbdfff]
[ 1.100031] tpm_crb: probe of MSFT0101:00 failed with error -16
[ 1.102511] loop: module loaded
[ 1.102848] libphy: Fixed MDIO Bus: probed
[ 1.102849] tun: Universal TUN/TAP device driver, 1.6
[ 1.102893] PPP generic driver version 2.4.2
[ 1.102946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.102949] ehci-pci: EHCI PCI platform driver
[ 1.103202] ehci-pci 0000:00:12.0: EHCI Host Controller
[ 1.103209] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus
number 1
[ 1.103223] ehci-pci 0000:00:12.0: debug port 2
[ 1.103288] ehci-pci 0000:00:12.0: irq 18, io mem 0xf0b6d000
[ 1.117099] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[ 1.117193] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 5.03
[ 1.117195] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.117197] usb usb1: Product: EHCI Host Controller
[ 1.117198] usb usb1: Manufacturer: Linux 5.3.0-25-generic ehci_hcd
[ 1.117199] usb usb1: SerialNumber: 0000:00:12.0
[ 1.117382] hub 1-0:1.0: USB hub found
[ 1.117391] hub 1-0:1.0: 2 ports detected
[ 1.117566] ehci-platform: EHCI generic platform driver
[ 1.117591] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.117594] ohci-pci: OHCI PCI platform driver
[ 1.117608] ohci-platform: OHCI generic platform driver
[ 1.117618] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.117811] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.117820] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 2
[ 1.118021] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100
quirks 0x0000000000000410
[ 1.118311] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 5.03
[ 1.118313] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.118315] usb usb2: Product: xHCI Host Controller
[ 1.118316] usb usb2: Manufacturer: Linux 5.3.0-25-generic xhci-hcd
[ 1.118317] usb usb2: SerialNumber: 0000:00:10.0
[ 1.118444] hub 2-0:1.0: USB hub found
[ 1.118455] hub 2-0:1.0: 4 ports detected
[ 1.119241] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.119246] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 3
[ 1.119249] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 1.124928] usb usb3: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 1.124957] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 5.03
[ 1.124959] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.124961] usb usb3: Product: xHCI Host Controller
[ 1.124962] usb usb3: Manufacturer: Linux 5.3.0-25-generic xhci-hcd
[ 1.124963] usb usb3: SerialNumber: 0000:00:10.0
[ 1.125080] hub 3-0:1.0: USB hub found
[ 1.125093] hub 3-0:1.0: 4 ports detected
[ 1.127085] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.131986] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.131992] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.132143] mousedev: PS/2 mouse device common for all mice
[ 1.132357] rtc_cmos 00:01: RTC can wake from S4
[ 1.132485] rtc_cmos 00:01: registered as rtc0
[ 1.132505] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet
irqs
[ 1.132513] i2c /dev entries driver
[ 1.132601] device-mapper: uevent: version 1.0.3
[ 1.132672] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised:
dm-de...@redhat.com
[ 1.132701] platform eisa.0: Probing EISA bus 0
[ 1.132704] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.132706] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.132708] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.132710] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.132711] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.132713] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.132715] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.132716] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.132718] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.132719] platform eisa.0: EISA: Detected 0 cards
[ 1.132750] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.132753] EFI Variables Facility v0.08 2004-May-17
[ 1.138133] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.159838] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
[ 1.164590] x86/pm: family 0x15 cpu detected, MSR saving is needed during
suspending.
[ 1.164849] NET: Registered protocol family 10
[ 1.177098] Segment Routing with IPv6
[ 1.177147] NET: Registered protocol family 17
[ 1.177219] Key type dns_resolver registered
[ 1.177466] RAS: Correctable Errors collector initialized.
[ 1.177514] microcode: CPU0: patch_level=0x06006704
[ 1.177520] microcode: CPU1: patch_level=0x06006704
[ 1.177560] microcode: Microcode Update Driver: v2.2.
[ 1.177575] sched_clock: Marking stable (1156979796, 20575791)->(2331707135,
-1154151548)
[ 1.177750] registered taskstats version 1
[ 1.177769] Loading compiled-in X.509 certificates
[ 1.180868] Loaded X.509 cert 'Build time autogenerated kernel key:
966974acebafded043609281d261309390895462'
[ 1.180925] zswap: loaded using pool lzo/zbud
[ 1.192931] Key type big_key registered
[ 1.198804] Key type encrypted registered
[ 1.198813] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.201148] ima: No TPM chip found, activating TPM-bypass!
[ 1.201157] ima: Allocated hash algorithm: sha1
[ 1.201166] No architecture policies found
[ 1.201188] evm: Initialising EVM extended attributes:
[ 1.201189] evm: security.selinux
[ 1.201190] evm: security.SMACK64
[ 1.201190] evm: security.SMACK64EXEC
[ 1.201191] evm: security.SMACK64TRANSMUTE
[ 1.201191] evm: security.SMACK64MMAP
[ 1.201192] evm: security.apparmor
[ 1.201192] evm: security.ima
[ 1.201193] evm: security.capability
[ 1.201194] evm: HMAC attrs: 0x1
[ 1.201616] PM: Magic number: 15:142:491
[ 1.201732] rtc_cmos 00:01: setting system clock to 2019-12-05T17:28:20 UTC
(1575566900)
[ 1.201946] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.204505] Freeing unused decrypted memory: 2040K
[ 1.205439] Freeing unused kernel image memory: 2668K
[ 1.226878] Write protecting the kernel read-only data: 22528k
[ 1.227701] Freeing unused kernel image memory: 2008K
[ 1.228241] Freeing unused kernel image memory: 1416K
[ 1.241457] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.241462] Run /init as init process
[ 1.354112] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.361231] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.361730] acpi device:00: registered as cooling_device2
[ 1.361801] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.364395] i2c_hid i2c-DELL087E:00: i2c-DELL087E:00 supply vdd not found,
using dummy regulator
[ 1.364424] i2c_hid i2c-DELL087E:00: i2c-DELL087E:00 supply vddl not found,
using dummy regulator
[ 1.395792] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method
not found
[ 1.396623] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 1.396626] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port
selection
[ 1.398830] ahci 0000:00:11.0: version 3.0
[ 1.399116] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x2
impl SATA mode
[ 1.399120] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs
pio slum part
[ 1.404451] scsi host0: ahci
[ 1.410587] scsi host1: ahci
[ 1.410732] ata1: DUMMY
[ 1.410736] ata2: SATA max UDMA/133 abar m1024@0xf0b6c000 port 0xf0b6c180
irq 19
[ 1.450726] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.450754] usb 2-2: new full-speed USB device number 2 using xhci_hcd
[ 1.456224] input: DELL087E:00 04F3:3082 Mouse as
/devices/platform/AMD0010:00/i2c-0/i2c-DELL087E:00/0018:04F3:3082.0001/input/input8
[ 1.456368] input: DELL087E:00 04F3:3082 Touchpad as
/devices/platform/AMD0010:00/i2c-0/i2c-DELL087E:00/0018:04F3:3082.0001/input/input9
[ 1.456490] hid-generic 0018:04F3:3082.0001: input,hidraw0: I2C HID v1.00
Mouse [DELL087E:00 04F3:3082] on i2c-DELL087E:00
[ 1.607187] usb 1-1: New USB device found, idVendor=0438, idProduct=7900,
bcdDevice= 0.18
[ 1.607191] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.607467] hub 1-1:1.0: USB hub found
[ 1.607554] hub 1-1:1.0: 4 ports detected
[ 1.617069] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x83 has
wMaxPacketSize 0, skipping
[ 1.617073] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x3 has
wMaxPacketSize 0, skipping
[ 1.617080] usb 2-2: New USB device found, idVendor=0cf3, idProduct=e005,
bcdDevice= 0.01
[ 1.617082] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.886916] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.887187] ata2.00: ATA-9: Dell WR202KD032G E70290F5, 90014a, max UDMA7
[ 1.887190] ata2.00: 61071360 sectors, multi 1: LBA48
[ 1.887478] ata2.00: configured for UDMA/133
[ 1.887672] scsi 1:0:0:0: Direct-Access ATA Dell WR202KD032G 4a
PQ: 0 ANSI: 5
[ 1.887910] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.887968] sd 1:0:0:0: [sda] 61071360 512-byte logical blocks: (31.3
GB/29.1 GiB)
[ 1.887987] sd 1:0:0:0: [sda] Write Protect is off
[ 1.887989] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.888016] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.894713] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 1.895989] sda: sda1 sda2
[ 1.896525] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.951314] psmouse serio1: elantech: assuming hardware version 4 (with
firmware version 0x4d1f01)
[ 1.962066] psmouse serio1: elantech: Synaptics capabilities query result
0x11, 0x15, 0x0b.
[ 1.972481] psmouse serio1: elantech: Elan sample query result 01, 7a, 75
[ 2.006709] tsc: Refined TSC clocksource calibration: 1597.002 MHz
[ 2.006716] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x170514dcf86, max_idle_ns: 440795282824 ns
[ 2.006733] clocksource: Switched to clocksource tsc
[ 2.013424] fbcon: Taking over console
[ 2.013530] Console: switching to colour frame buffer device 170x48
[ 2.021485] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
(null)
[ 2.027712] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=5520,
bcdDevice=71.66
[ 2.027716] usb 1-1.1: New USB device strings: Mfr=3, Product=1,
SerialNumber=2
[ 2.027718] usb 1-1.1: Product: Integrated_Webcam_HD
[ 2.027720] usb 1-1.1: Manufacturer: CNFHH46O043420031F32
[ 2.027721] usb 1-1.1: SerialNumber: 200901010001
[ 2.031035] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio1/input/input7
[ 2.110712] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 2.219558] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0129,
bcdDevice=39.60
[ 2.219562] usb 1-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.219563] usb 1-1.3: Product: USB2.0-CRW
[ 2.219565] usb 1-1.3: Manufacturer: Generic
[ 2.219566] usb 1-1.3: SerialNumber: 20100201396000000
[ 2.265266] systemd[1]: Inserted module 'autofs4'
[ 2.322471] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2
default-hierarchy=hybrid)
[ 2.339008] systemd[1]: Detected architecture x86-64.
[ 2.341048] systemd[1]: Set hostname to <adminmeir-Inspiron-3180>.
[ 2.342673] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid
argument
[ 2.530271] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream=
references a path below legacy directory /var/run/, updating
/var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update
the unit file accordingly.
[ 2.625183] systemd[1]: Set up automount Arbitrary Executable File Formats
File System Automount Point.
[ 2.625389] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.625511] systemd[1]: Listening on Journal Socket.
[ 2.627318] systemd[1]: Starting Set the console keyboard layout...
[ 2.628033] systemd[1]: Condition check resulted in Set Up Additional Binary
Formats being skipped.
[ 2.688875] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 2.697618] lp: driver loaded but no devices found
[ 2.719485] ppdev: user-space parallel port driver
[ 2.946799] Adding 1392256k swap on /swapfile. Priority:-2 extents:5
across:1425024k SSFS
[ 3.419866] systemd-journald[306]: Received request to flush runtime journal
from PID 1
[ 3.687738] input: DELL Wireless hotkeys as /devices/virtual/input/input11
[ 3.966967] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[ 3.970170] input: DELL087E:00 04F3:3082 Touchpad as
/devices/platform/AMD0010:00/i2c-0/i2c-DELL087E:00/0018:04F3:3082.0001/input/input13
[ 3.970899] hid-multitouch 0018:04F3:3082.0001: input,hidraw0: I2C HID v1.00
Mouse [DELL087E:00 04F3:3082] on i2c-DELL087E:00
[ 3.976429] Bluetooth: Core ver 2.22
[ 3.976454] NET: Registered protocol family 31
[ 3.976456] Bluetooth: HCI device and connection manager initialized
[ 3.976461] Bluetooth: HCI socket layer initialized
[ 3.976464] Bluetooth: L2CAP socket layer initialized
[ 3.976469] Bluetooth: SCO socket layer initialized
[ 3.976809] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.3)
[ 3.987624] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.022749] input: Dell WMI hotkeys as
/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input15
[ 4.032082] mc: Linux media interface: v0.10
[ 4.069618] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroe...@suse.de>
[ 4.086604] usbcore: registered new interface driver btusb
[ 4.107514] videodev: Linux video capture interface: v2.00
[ 4.111257] usbcore: registered new interface driver rtsx_usb
[ 4.167922] usb 2-2: USB disconnect, device number 2
[ 4.177275] usbcore: registered new interface driver ath3k
[ 4.192800] cryptd: max_cpu_qlen set to 1000
[ 4.324704] AVX2 version of gcm_enc/dec engaged.
[ 4.324707] AES CTR mode by8 optimization enabled
[ 4.420660] [drm] amdgpu kernel modesetting enabled.
[ 4.420875] Parsing CRAT table with 1 nodes
[ 4.420879] Creating topology SYSFS entries
[ 4.420902] Topology: Add APU node [0x0:0x0]
[ 4.420903] Finished initializing topology
[ 4.420976] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0:
0xe8000000 -> 0xefffffff
[ 4.420979] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2:
0xf0000000 -> 0xf07fffff
[ 4.420982] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 5:
0xf0b00000 -> 0xf0b3ffff
[ 4.420984] checking generic (e8000000 420000) vs hw (e8000000 8000000)
[ 4.420985] fb0: switching to amdgpudrmfb from EFI VGA
[ 4.421086] Console: switching to colour dummy device 80x25
[ 4.421138] amdgpu 0000:00:01.0: vgaarb: deactivate vga console
[ 4.421525] [drm] initializing kernel modesetting (STONEY 0x1002:0x98E4
0x1028:0x087E 0xEB).
[ 4.421850] [drm] register mmio base: 0xF0B00000
[ 4.421851] [drm] register mmio size: 262144
[ 4.421857] [drm] add ip block number 0 <vi_common>
[ 4.421859] [drm] add ip block number 1 <gmc_v8_0>
[ 4.421860] [drm] add ip block number 2 <cz_ih>
[ 4.421861] [drm] add ip block number 3 <gfx_v8_0>
[ 4.421862] [drm] add ip block number 4 <sdma_v3_0>
[ 4.421864] [drm] add ip block number 5 <powerplay>
[ 4.421865] [drm] add ip block number 6 <dm>
[ 4.421866] [drm] add ip block number 7 <uvd_v6_0>
[ 4.421867] [drm] add ip block number 8 <vce_v3_0>
[ 4.421868] [drm] add ip block number 9 <acp_ip>
[ 4.421872] amdgpu 0000:00:01.0: kfd not supported on this ASIC
[ 4.421907] ATOM BIOS: 113-C91400-007
[ 4.421931] [drm] UVD is enabled in physical mode
[ 4.421933] [drm] VCE enabled in VM mode
[ 4.421983] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment
size is 9-bit
[ 4.421991] amdgpu 0000:00:01.0: VRAM: 80M 0x000000F400000000 -
0x000000F404FFFFFF (80M used)
[ 4.421993] amdgpu 0000:00:01.0: GART: 1024M 0x000000FF00000000 -
0x000000FF3FFFFFFF
[ 4.421999] [drm] Detected VRAM RAM=80M, BAR=80M
[ 4.422001] [drm] RAM width 64bits UNKNOWN
[ 4.434056] [TTM] Zone kernel: Available graphics memory: 1985928 KiB
[ 4.434058] [TTM] Initializing pool allocator
[ 4.434065] [TTM] Initializing DMA pool allocator
[ 4.434135] [drm] amdgpu: 80M of VRAM memory ready
[ 4.434140] [drm] amdgpu: 2909M of GTT memory ready.
[ 4.434163] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 4.434202] [drm] PCIE GART of 1024M enabled (table at 0x000000F400401000).
[ 4.436090] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5520)
[ 4.454609] uvcvideo 1-1.1:1.0: Entity type for entity Realtek Extended
Controls Unit was not initialized!
[ 4.454613] uvcvideo 1-1.1:1.0: Entity type for entity Extension 4 was not
initialized!
[ 4.454616] uvcvideo 1-1.1:1.0: Entity type for entity Extension 7 was not
initialized!
[ 4.454618] uvcvideo 1-1.1:1.0: Entity type for entity Processing 2 was not
initialized!
[ 4.454620] uvcvideo 1-1.1:1.0: Entity type for entity Camera 1 was not
initialized!
[ 4.454859] input: Integrated_Webcam_HD: Integrate as
/devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input16
[ 4.454972] usbcore: registered new interface driver uvcvideo
[ 4.454973] USB Video Class driver (1.1.1)
[ 4.470381] ath: phy0: WB335 2-ANT card detected
[ 4.470385] ath: phy0: Set BT/WLAN RX diversity capability
[ 4.482719] usb 2-2: new full-speed USB device number 3 using xhci_hcd
[ 4.494915] amdgpu: [powerplay] hwmgr_sw_init smu backed is smu8_smu
[ 4.501452] [drm] Found UVD firmware Version: 1.43 Family ID: 15
[ 4.501478] [drm] UVD ENC is disabled
[ 4.506603] [drm] Found VCE firmware Version: 52.0 Binary ID: 3
[ 4.512491] smu version 33.06.00
[ 4.538588] ath: phy0: Enable LNA combining
[ 4.540884] ath: phy0: ASPM enabled: 0x42
[ 4.540888] ath: EEPROM regdomain: 0x6c
[ 4.540889] ath: EEPROM indicates we should expect a direct regpair map
[ 4.540892] ath: Country alpha2 being used: 00
[ 4.540893] ath: Regpair used: 0x6c
[ 4.545861] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.647295] ieee80211 phy0: Atheros AR9565 Rev:2 mem=0xffffa6a600880000,
irq=33
[ 4.651867] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x83 has
wMaxPacketSize 0, skipping
[ 4.651872] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x3 has
wMaxPacketSize 0, skipping
[ 4.651878] usb 2-2: New USB device found, idVendor=0cf3, idProduct=e005,
bcdDevice= 0.02
[ 4.651881] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.728914] [drm] DM_PPLIB: values for Engine clock
[ 4.728917] [drm] DM_PPLIB: 200000
[ 4.728918] [drm] DM_PPLIB: 300000
[ 4.728919] [drm] DM_PPLIB: 400000
[ 4.728920] [drm] DM_PPLIB: 450000
[ 4.728920] [drm] DM_PPLIB: 496560
[ 4.728921] [drm] DM_PPLIB: 533340
[ 4.728922] [drm] DM_PPLIB: 576000
[ 4.728922] [drm] DM_PPLIB: 600000
[ 4.728924] [drm] DM_PPLIB: Validation clocks:
[ 4.728925] [drm] DM_PPLIB: engine_max_clock: 60000
[ 4.728925] [drm] DM_PPLIB: memory_max_clock: 93300
[ 4.728930] [drm] DM_PPLIB: level : 8
[ 4.728941] [drm] DM_PPLIB: values for Display clock
[ 4.728942] [drm] DM_PPLIB: 300000
[ 4.728943] [drm] DM_PPLIB: 400000
[ 4.728944] [drm] DM_PPLIB: 496560
[ 4.728944] [drm] DM_PPLIB: 626090
[ 4.728945] [drm] DM_PPLIB: 685720
[ 4.728946] [drm] DM_PPLIB: 757900
[ 4.728946] [drm] DM_PPLIB: 800000
[ 4.728947] [drm] DM_PPLIB: 847060
[ 4.728948] [drm] DM_PPLIB: Validation clocks:
[ 4.728948] [drm] DM_PPLIB: engine_max_clock: 60000
[ 4.728949] [drm] DM_PPLIB: memory_max_clock: 93300
[ 4.728950] [drm] DM_PPLIB: level : 8
[ 4.728951] [drm] DM_PPLIB: values for Memory clock
[ 4.728952] [drm] DM_PPLIB: 667000
[ 4.728953] [drm] DM_PPLIB: 933000
[ 4.728953] [drm] DM_PPLIB: Validation clocks:
[ 4.728954] [drm] DM_PPLIB: engine_max_clock: 60000
[ 4.728955] [drm] DM_PPLIB: memory_max_clock: 93300
[ 4.728956] [drm] DM_PPLIB: level : 8
[ 4.750667] [drm] Display Core initialized with v3.2.35!
[ 4.774884] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 4.791813] input: HDA ATI HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.1/sound/card0/input17
[ 4.817451] kvm: Nested Virtualization enabled
[ 4.817461] kvm: Nested Paging enabled
[ 4.817462] SVM: Virtual VMLOAD VMSAVE supported
[ 4.817462] SVM: Virtual GIF supported
[ 4.836529] MCE: In-kernel MCE decoding enabled.
[ 4.851248] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3204:
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.851252] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 4.851255] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1
(0x21/0x0/0x0/0x0/0x0)
[ 4.851257] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 4.851259] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 4.851261] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19
[ 4.851264] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a
[ 4.851266] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 4.871298] ACPI: button: The lid device is not compliant to SW_LID.
[ 4.905802] input: HD-Audio Generic Headphone Mic as
/devices/pci0000:00/0000:00:09.2/sound/card1/input18
[ 4.909352] [drm] SADs count is: -2, don't need to read it
[ 4.919917] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.919919] [drm] Driver supports precise vblank timestamp query.
[ 4.946751] [drm] UVD initialized successfully.
[ 5.047229] [drm] VCE initialized successfully.
[ 5.054535] [drm] fb mappable at 0xC12686000
[ 5.054537] [drm] vram apper at 0x112000000
[ 5.054539] [drm] size 4325376
[ 5.054539] [drm] fb depth is 24
[ 5.054540] [drm] pitch is 5632
[ 5.054645] fbcon: amdgpudrmfb (fb0) is primary device
[ 5.054775] Console: switching to colour frame buffer device 170x48
[ 5.054806] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[ 5.181610] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0
[ 5.262842] [drm] Initialized amdgpu 3.33.0 20150101 for 0000:00:01.0 on
minor 0
[ 6.369860] audit: type=1400 audit(1575566905.661:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=640
comm="apparmor_parser"
[ 6.393974] audit: type=1400 audit(1575566905.685:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=639
comm="apparmor_parser"
[ 6.393980] audit: type=1400 audit(1575566905.685:4): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=639
comm="apparmor_parser"
[ 6.393984] audit: type=1400 audit(1575566905.685:5): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=639 comm="apparmor_parser"
[ 6.393987] audit: type=1400 audit(1575566905.685:6): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/connman/scripts/dhclient-script" pid=639 comm="apparmor_parser"
[ 6.408047] audit: type=1400 audit(1575566905.701:7): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/lib/cups/backend/cups-pdf" pid=642 comm="apparmor_parser"
[ 6.408053] audit: type=1400 audit(1575566905.701:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=642
comm="apparmor_parser"
[ 6.408057] audit: type=1400 audit(1575566905.701:9): apparmor="STATUS"
operation="profile_load" profile="unconfined"
name="/usr/sbin/cupsd//third_party" pid=642 comm="apparmor_parser"
[ 6.419375] audit: type=1400 audit(1575566905.713:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="system_tor" pid=643
comm="apparmor_parser"
[ 6.423181] audit: type=1400 audit(1575566905.717:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed"
pid=644 comm="apparmor_parser"
[ 6.657547] mmc0: new ultra high speed SDR50 SDXC card at address 0001
[ 6.816210] mmcblk0: mmc0:0001 GD4QT 119 GiB
[ 6.822875] mmcblk0: p1
[ 7.982860] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.982864] Bluetooth: BNEP filters: protocol multicast
[ 7.982871] Bluetooth: BNEP socket layer initialized
[ 11.552225] wlp1s0: authenticate with f4:f2:6d:c5:c8:35
[ 11.565463] wlp1s0: send auth to f4:f2:6d:c5:c8:35 (try 1/3)
[ 11.567988] wlp1s0: authenticated
[ 11.570772] wlp1s0: associate with f4:f2:6d:c5:c8:35 (try 1/3)
[ 11.578594] wlp1s0: RX AssocResp from f4:f2:6d:c5:c8:35 (capab=0x431
status=0 aid=6)
[ 11.578750] wlp1s0: associated
[ 11.709109] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 17.424345] rfkill: input handler disabled
[ 32.153990] rfkill: input handler enabled
[ 32.850749] Bluetooth: RFCOMM TTY layer initialized
[ 32.850759] Bluetooth: RFCOMM socket layer initialized
[ 32.850766] Bluetooth: RFCOMM ver 1.11
[ 36.755362] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data
may be corrupt. Please run fsck.
[ 162.043866] SGI XFS with ACLs, security attributes, realtime, no debug
enabled
[ 162.072831] JFS: nTxBlock = 8192, nTxLock = 65536
[ 162.108200] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 162.184913] QNX4 filesystem 0.2.3 registered.
[ 162.267911] raid6: avx2x4 gen() 2429 MB/s
[ 162.315908] raid6: avx2x4 xor() 3016 MB/s
[ 162.363899] raid6: avx2x2 gen() 2869 MB/s
[ 162.411898] raid6: avx2x2 xor() 3200 MB/s
[ 162.459896] raid6: avx2x1 gen() 2405 MB/s
[ 162.507892] raid6: avx2x1 xor() 2867 MB/s
[ 162.555898] raid6: sse2x4 gen() 3356 MB/s
[ 162.603891] raid6: sse2x4 xor() 2723 MB/s
[ 162.651899] raid6: sse2x2 gen() 2945 MB/s
[ 162.699894] raid6: sse2x2 xor() 2853 MB/s
[ 162.747902] raid6: sse2x1 gen() 3714 MB/s
[ 162.795898] raid6: sse2x1 xor() 3315 MB/s
[ 162.795902] raid6: using algorithm sse2x1 gen() 3714 MB/s
[ 162.795902] raid6: .... xor() 3315 MB/s, rmw enabled
[ 162.795905] raid6: using avx2x2 recovery algorithm
[ 162.805546] xor: automatically using best checksumming function avx
[ 162.864314] Btrfs loaded, crc32c=crc32c-intel
[ 1627.182708] PM: suspend entry (deep)
[ 1627.254125] Filesystems sync: 0.071 seconds
[ 1627.254400] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1627.256648] OOM killer disabled.
[ 1627.256649] Freezing remaining freezable tasks ... (elapsed 0.001 seconds)
done.
[ 1627.258371] printk: Suspending console(s) (use no_console_suspend to debug)
[ 1627.260996] wlp1s0: deauthenticating from f4:f2:6d:c5:c8:35 by local choice
(Reason: 3=DEAUTH_LEAVING)
[ 1627.285734] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 1627.286420] sd 1:0:0:0: [sda] Stopping disk
[ 1627.417436] snd_hda_intel 0000:00:09.2: Refused to change power state,
currently in D0
[ 1627.437504] ACPI: Preparing to enter system sleep state S3
[ 1627.493598] PM: Saving platform NVS memory
[ 1627.493658] Disabling non-boot CPUs ...
[ 1627.494016] IRQ 28: no longer affine to CPU1
[ 1627.494022] IRQ 33: no longer affine to CPU1
[ 1627.495109] smpboot: CPU 1 is now offline
[ 1627.499152] ACPI: Low-level resume complete
[ 1627.499200] PM: Restoring platform NVS memory
[ 1627.499306] LVT offset 0 assigned for vector 0x400
[ 1627.499553] Enabling non-boot CPUs ...
[ 1627.499624] x86: Booting SMP configuration:
[ 1627.499625] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 1627.499816] microcode: CPU1: patch_level=0x06006704
[ 1627.502415] CPU1 is up
[ 1627.502813] ACPI: Waking up from system sleep state S3
[ 1627.632238] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000).
[ 1627.632253] smu version 33.06.00
[ 1627.658978] ath: phy0: ASPM enabled: 0x42
[ 1627.677030] sd 1:0:0:0: [sda] Starting disk
[ 1627.688289] [drm] UVD initialized successfully.
[ 1627.788461] [drm] VCE initialized successfully.
[ 1627.902055] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
[ 1627.916463] usb 2-2: reset full-speed USB device number 3 using xhci_hcd
[ 1628.070009] usb 2-2: device firmware changed
[ 1628.090060] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
[ 1628.138057] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1628.138618] ata2.00: configured for UDMA/133
[ 1628.771689] acpi LNXPOWER:05: Turning OFF
[ 1628.771788] OOM killer enabled.
[ 1628.771789] Restarting tasks ...
[ 1628.783190] usb 2-2: USB disconnect, device number 3
[ 1628.796317] done.
[ 1628.854778] PM: suspend exit
[ 1628.917889] usb 2-2: new full-speed USB device number 4 using xhci_hcd
[ 1629.087146] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x83 has
wMaxPacketSize 0, skipping
[ 1629.087150] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x3 has
wMaxPacketSize 0, skipping
[ 1629.087156] usb 2-2: New USB device found, idVendor=0cf3, idProduct=e005,
bcdDevice= 0.01
[ 1629.087159] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1629.193390] usb 2-2: USB disconnect, device number 4
[ 1629.469868] usb 2-2: new full-speed USB device number 5 using xhci_hcd
[ 1629.635119] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x83 has
wMaxPacketSize 0, skipping
[ 1629.635123] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x3 has
wMaxPacketSize 0, skipping
[ 1629.635129] usb 2-2: New USB device found, idVendor=0cf3, idProduct=e005,
bcdDevice= 0.02
[ 1629.635131] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1629.683492] psmouse serio1: elantech: assuming hardware version 4 (with
firmware version 0x4d1f01)
[ 1629.694490] psmouse serio1: elantech: Synaptics capabilities query result
0x11, 0x15, 0x0b.
[ 1629.705502] psmouse serio1: elantech: Elan sample query result 01, 7a, 75
[ 1629.761954] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio1/input/input20
[ 1630.247670] wlp1s0: authenticate with f4:f2:6d:c5:c8:35
[ 1630.260893] wlp1s0: send auth to f4:f2:6d:c5:c8:35 (try 1/3)
[ 1630.267310] wlp1s0: authenticated
[ 1630.269870] wlp1s0: associate with f4:f2:6d:c5:c8:35 (try 1/3)
[ 1630.274704] wlp1s0: RX AssocResp from f4:f2:6d:c5:c8:35 (capab=0x431
status=0 aid=6)
[ 1630.274816] wlp1s0: associated
[ 1630.282361] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 1740.623628] rfkill: input handler disabled
[ 1773.385652] rfkill: input handler enabled
[ 4290.727993] PM: suspend entry (deep)
[ 4290.804209] Filesystems sync: 0.076 seconds
[ 4290.806418] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 4290.809162] OOM killer disabled.
[ 4290.809163] Freezing remaining freezable tasks ... (elapsed 0.001 seconds)
done.
[ 4290.810704] printk: Suspending console(s) (use no_console_suspend to debug)
[ 4290.812649] wlp1s0: deauthenticating from f4:f2:6d:c5:c8:35 by local choice
(Reason: 3=DEAUTH_LEAVING)
[ 4290.828164] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 4290.828741] sd 1:0:0:0: [sda] Stopping disk
[ 4290.990461] ACPI: Preparing to enter system sleep state S3
[ 4291.046544] PM: Saving platform NVS memory
[ 4291.046604] Disabling non-boot CPUs ...
[ 4291.046923] IRQ 26: no longer affine to CPU1
[ 4291.046928] IRQ 29: no longer affine to CPU1
[ 4291.046933] IRQ 32: no longer affine to CPU1
[ 4291.047993] smpboot: CPU 1 is now offline
[ 4291.050470] ACPI: Low-level resume complete
[ 4291.050518] PM: Restoring platform NVS memory
[ 4291.050622] LVT offset 0 assigned for vector 0x400
[ 4291.050918] Enabling non-boot CPUs ...
[ 4291.050987] x86: Booting SMP configuration:
[ 4291.050988] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 4291.051182] microcode: CPU1: patch_level=0x06006704
[ 4291.053758] CPU1 is up
[ 4291.054155] ACPI: Waking up from system sleep state S3
[ 4291.181219] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000).
[ 4291.181234] smu version 33.06.00
[ 4291.182175] ath: phy0: ASPM enabled: 0x42
[ 4291.200045] sd 1:0:0:0: [sda] Starting disk
[ 4291.236863] [drm] UVD initialized successfully.
[ 4291.337032] [drm] VCE initialized successfully.
[ 4291.423015] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
[ 4291.436581] usb 2-2: reset full-speed USB device number 5 using xhci_hcd
[ 4291.590268] usb 2-2: device firmware changed
[ 4291.610997] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
[ 4291.659003] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4291.659569] ata2.00: configured for UDMA/133
[ 4292.290308] OOM killer enabled.
[ 4292.290309] Restarting tasks ...
[ 4292.304536] usb 2-2: USB disconnect, device number 5
[ 4292.329227] done.
[ 4292.388057] PM: suspend exit
[ 4292.434876] usb 2-2: new full-speed USB device number 6 using xhci_hcd
[ 4292.600115] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x83 has
wMaxPacketSize 0, skipping
[ 4292.600119] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x3 has
wMaxPacketSize 0, skipping
[ 4292.600125] usb 2-2: New USB device found, idVendor=0cf3, idProduct=e005,
bcdDevice= 0.01
[ 4292.600127] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4292.695410] usb 2-2: USB disconnect, device number 6
[ 4293.006884] usb 2-2: new full-speed USB device number 7 using xhci_hcd
[ 4293.137556] psmouse serio1: elantech: assuming hardware version 4 (with
firmware version 0x4d1f01)
[ 4293.147822] psmouse serio1: elantech: Synaptics capabilities query result
0x11, 0x15, 0x0b.
[ 4293.158075] psmouse serio1: elantech: Elan sample query result 01, 7a, 75
[ 4293.172133] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x83 has
wMaxPacketSize 0, skipping
[ 4293.172137] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x3 has
wMaxPacketSize 0, skipping
[ 4293.172145] usb 2-2: New USB device found, idVendor=0cf3, idProduct=e005,
bcdDevice= 0.02
[ 4293.172147] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4293.220794] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio1/input/input22
[ 4293.844662] wlp1s0: authenticate with f4:f2:6d:c5:c8:35
[ 4293.861350] wlp1s0: send auth to f4:f2:6d:c5:c8:35 (try 1/3)
[ 4293.863862] wlp1s0: authenticated
[ 4293.866887] wlp1s0: associate with f4:f2:6d:c5:c8:35 (try 1/3)
[ 4293.880301] wlp1s0: RX AssocResp from f4:f2:6d:c5:c8:35 (capab=0x431
status=0 aid=2)
[ 4293.880412] wlp1s0: associated
[ 4293.888038] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 4527.700371] perf: interrupt took too long (2556 > 2500), lowering
kernel.perf_event_max_sample_rate to 78000
[ 9778.021561] PM: suspend entry (deep)
[ 9778.108639] Filesystems sync: 0.087 seconds
[ 9778.115912] Freezing user space processes ... (elapsed 0.009 seconds) done.
[ 9778.125611] OOM killer disabled.
[ 9778.125613] Freezing remaining freezable tasks ... (elapsed 0.002 seconds)
done.
[ 9778.127854] printk: Suspending console(s) (use no_console_suspend to debug)
[ 9778.132456] wlp1s0: deauthenticating from f4:f2:6d:c5:c8:35 by local choice
(Reason: 3=DEAUTH_LEAVING)
[ 9778.154232] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 9778.154965] sd 1:0:0:0: [sda] Stopping disk
[ 9778.193868] psmouse serio1: Failed to disable mouse on isa0060/serio1
[ 9778.314258] ACPI: Preparing to enter system sleep state S3
[ 9778.370391] PM: Saving platform NVS memory
[ 9778.370450] Disabling non-boot CPUs ...
[ 9778.370776] IRQ 26: no longer affine to CPU1
[ 9778.370781] IRQ 29: no longer affine to CPU1
[ 9778.370788] IRQ 33: no longer affine to CPU1
[ 9778.371892] smpboot: CPU 1 is now offline
[ 9778.374066] ACPI: Low-level resume complete
[ 9778.374113] PM: Restoring platform NVS memory
[ 9778.374219] LVT offset 0 assigned for vector 0x400
[ 9778.374526] Enabling non-boot CPUs ...
[ 9778.374597] x86: Booting SMP configuration:
[ 9778.374599] smpboot: Booting Node 0 Processor 1 APIC 0x11
[ 9778.374813] microcode: CPU1: patch_level=0x06006704
[ 9778.377373] CPU1 is up
[ 9778.377774] ACPI: Waking up from system sleep state S3
[ 9778.505000] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000).
[ 9778.505016] smu version 33.06.00
[ 9778.505947] ath: phy0: ASPM enabled: 0x42
[ 9778.523894] sd 1:0:0:0: [sda] Starting disk
[ 9778.562023] [drm] UVD initialized successfully.
[ 9778.664090] [drm] VCE initialized successfully.
[ 9778.746832] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
[ 9778.760195] usb 2-2: reset full-speed USB device number 7 using xhci_hcd
[ 9778.914039] usb 2-2: device firmware changed
[ 9778.934831] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
[ 9778.982826] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9778.983389] ata2.00: configured for UDMA/133
[ 9779.630023] OOM killer enabled.
[ 9779.630024] Restarting tasks ...
[ 9779.637880] usb 2-2: USB disconnect, device number 7
[ 9779.655810] done.
[ 9779.728824] PM: suspend exit
[ 9779.766689] usb 2-2: new full-speed USB device number 8 using xhci_hcd
[ 9779.932895] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x83 has
wMaxPacketSize 0, skipping
[ 9779.932900] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x3 has
wMaxPacketSize 0, skipping
[ 9779.932907] usb 2-2: New USB device found, idVendor=0cf3, idProduct=e005,
bcdDevice= 0.01
[ 9779.932910] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9780.048692] usb 2-2: USB disconnect, device number 8
[ 9780.363634] usb 2-2: new full-speed USB device number 9 using xhci_hcd
[ 9780.527956] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x83 has
wMaxPacketSize 0, skipping
[ 9780.527960] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x3 has
wMaxPacketSize 0, skipping
[ 9780.527968] usb 2-2: New USB device found, idVendor=0cf3, idProduct=e005,
bcdDevice= 0.02
[ 9780.527970] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9781.237647] wlp1s0: authenticate with f4:f2:6d:c5:c8:35
[ 9781.274801] wlp1s0: send auth to f4:f2:6d:c5:c8:35 (try 1/3)
[ 9781.278026] wlp1s0: authenticated
[ 9781.282686] wlp1s0: associate with f4:f2:6d:c5:c8:35 (try 1/3)
[ 9781.288369] wlp1s0: RX AssocResp from f4:f2:6d:c5:c8:35 (capab=0x431
status=0 aid=2)
[ 9781.288499] wlp1s0: associated
[ 9781.296521] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[12285.734644] PM: suspend entry (deep)
[12285.787554] Filesystems sync: 0.052 seconds
[12285.787873] Freezing user space processes ... (elapsed 0.005 seconds) done.
[12285.793427] OOM killer disabled.
[12285.793429] Freezing remaining freezable tasks ... (elapsed 0.002 seconds)
done.
[12285.795627] printk: Suspending console(s) (use no_console_suspend to debug)
[12285.800808] wlp1s0: deauthenticating from f4:f2:6d:c5:c8:35 by local choice
(Reason: 3=DEAUTH_LEAVING)
[12285.821548] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[12285.822135] sd 1:0:0:0: [sda] Stopping disk
[12285.969071] ACPI: Preparing to enter system sleep state S3
[12286.029248] PM: Saving platform NVS memory
[12286.029321] Disabling non-boot CPUs ...
[12286.029765] IRQ 26: no longer affine to CPU1
[12286.029771] IRQ 29: no longer affine to CPU1
[12286.029779] IRQ 33: no longer affine to CPU1
[12286.030925] smpboot: CPU 1 is now offline
[12286.033412] ACPI: Low-level resume complete
[12286.033460] PM: Restoring platform NVS memory
[12286.033568] LVT offset 0 assigned for vector 0x400
[12286.033860] Enabling non-boot CPUs ...
[12286.033931] x86: Booting SMP configuration:
[12286.033932] smpboot: Booting Node 0 Processor 1 APIC 0x11
[12286.034126] microcode: CPU1: patch_level=0x06006704
[12286.036708] CPU1 is up
[12286.037108] ACPI: Waking up from system sleep state S3
[12286.163771] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000).
[12286.163790] smu version 33.06.00
[12286.166535] sd 1:0:0:0: [sda] Starting disk
[12286.190579] ath: phy0: ASPM enabled: 0x42
[12286.219993] [drm] UVD initialized successfully.
[12286.319856] [drm] VCE initialized successfully.
[12286.441615] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
[12286.451901] usb 2-2: reset full-speed USB device number 9 using xhci_hcd
[12286.605750] usb 2-2: device firmware changed
[12286.629638] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
[12286.641619] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[12286.642182] ata2.00: configured for UDMA/133
[12287.283480] OOM killer enabled.
[12287.283482] Restarting tasks ...
[12287.283567] usb 2-2: USB disconnect, device number 9
[12287.324263] done.
[12287.390200] PM: suspend exit
[12287.433505] usb 2-2: new full-speed USB device number 10 using xhci_hcd
[12287.592497] psmouse serio1: elantech: synaptics_send_cmd query 0x01 failed.
[12287.599604] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x83 has
wMaxPacketSize 0, skipping
[12287.599608] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x3 has
wMaxPacketSize 0, skipping
[12287.599614] usb 2-2: New USB device found, idVendor=0cf3, idProduct=e005,
bcdDevice= 0.01
[12287.599616] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[12287.697038] usb 2-2: USB disconnect, device number 10
[12288.009500] usb 2-2: new full-speed USB device number 11 using xhci_hcd
[12288.174595] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x83 has
wMaxPacketSize 0, skipping
[12288.174599] usb 2-2: config 1 interface 1 altsetting 0 endpoint 0x3 has
wMaxPacketSize 0, skipping
[12288.174606] usb 2-2: New USB device found, idVendor=0cf3, idProduct=e005,
bcdDevice= 0.02
[12288.174608] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[12288.328628] psmouse serio1: elantech: assuming hardware version 4 (with
firmware version 0x4d1f01)
[12288.339305] psmouse serio1: elantech: Synaptics capabilities query result
0x11, 0x15, 0x0b.
[12288.350288] psmouse serio1: elantech: Elan sample query result 01, 7a, 75
[12288.410023] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio1/input/input24
[12288.470665] psmouse serio1: Failed to enable mouse on isa0060/serio1
[12289.023333] wlp1s0: authenticate with f4:f2:6d:c5:c8:35
[12289.039525] wlp1s0: send auth to f4:f2:6d:c5:c8:35 (try 1/3)
[12289.042033] wlp1s0: authenticated
[12289.045503] wlp1s0: associate with f4:f2:6d:c5:c8:35 (try 1/3)
[12289.050323] wlp1s0: RX AssocResp from f4:f2:6d:c5:c8:35 (capab=0x431
status=0 aid=7)
[12289.050433] wlp1s0: associated
[12289.058151] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[12350.925711] usb 1-1.4: new low-speed USB device number 5 using ehci-pci
[12351.037847] usb 1-1.4: New USB device found, idVendor=04f3, idProduct=0230,
bcdDevice=24.58
[12351.037854] usb 1-1.4: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[12351.037857] usb 1-1.4: Product: USB+PS/2 Optical Mouse
[12351.084619] input: USB+PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:04F3:0230.0002/input/input25
[12351.084847] hid-generic 0003:04F3:0230.0002: input,hidraw1: USB HID v1.11
Mouse [USB+PS/2 Optical Mouse] on usb-0000:00:12.0-1.4/input0
[12351.084912] usbcore: registered new interface driver usbhid
[12351.084913] usbhid: USB HID core driver
user-meir@adminmeir-Inspiron-3180:~$
thanksMeir Levi
On Friday, September 27, 2019, 3:50:47 AM PDT, Kleber Sacilotto de Souza
<kleber.so...@canonical.com> wrote:
The kernel patch "drm/amdgpu: pin the csb buffer on hw init for gfx v8"
(Upstream commit 72cda9bb5e219aea0f2f62f56ae05198c59022a7) has already
been applied to Disco as part of bug #1842128 (Disco update: upstream
stable patchset 2019-08-30).
** Changed in: linux (Ubuntu Disco)
Status: New => Fix Committed
--
You received this bug notification because you are subscribed to the bug
report.
https://bugs.launchpad.net/bugs/1833617
Title:
[amdgpu] screen freeze after suspend
Status in linux package in Ubuntu:
Fix Committed
Status in linux source package in Disco:
Fix Committed
Status in xserver-xorg-video-amdgpu source package in Disco:
Invalid
Status in linux source package in Eoan:
Fix Committed
Status in xserver-xorg-video-amdgpu source package in Eoan:
Invalid
Bug description:
=== SRU Justification ===
[Impact]
Screen freeze after S3 on AMD Stoney Ridge.
[Fix]
Pin the VRAM so it won't contain garbage data after S3.
[Test]
After applying this patch I can confirm the issue is gone on Dell
Inspiron 3180, a Stoney Ridge laptop.
[Regression Potential]
Low. This patch only touched a small subset of amdgpu.
=== Original Bug Report ===
It's most likely amdgup driver needs an upgrade. Problem occurs since kernel
upgrade to 5.0
ProblemType: Bug
DistroRelease: Ubuntu 19.04
Package: xorg 1:7.7+19ubuntu12
ProcVersionSignature: Ubuntu 5.0.0-18.19-generic 5.0.12
Uname: Linux 5.0.0-18-generic x86_64
ApportVersion: 2.20.10-0ubuntu27
Architecture: amd64
CompositorRunning: None
Date: Thu Jun 20 13:46:46 2019
DistUpgraded: Fresh install
DistroCodename: disco
DistroVariant: ubuntu
ExtraDebuggingInterest: Yes, if not too technical
GraphicsCard:
Advanced Micro Devices, Inc. [AMD/ATI] Stoney [Radeon R2/R3/R4/R5 Graphics]
[1002:98e4] (rev eb) (prog-if 00 [VGA controller])
Subsystem: Dell Stoney [Radeon R2/R3/R4/R5 Graphics] [1028:087e]
InstallationDate: Installed on 2019-06-06 (14 days ago)
InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Release amd64 (20190416)
MachineType: Dell Inc. Inspiron 3180
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-18-generic
root=UUID=a16bd163-e82f-4ec1-9c5f-c9bd32e225fa ro
SourcePackage: xorg
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 03/09/2018
dmi.bios.vendor: Dell Inc.
dmi.bios.version: 1.3.0
dmi.board.name: 0918N8
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 10
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: 1.3.0
dmi.modalias:
dmi:bvnDellInc.:bvr1.3.0:bd03/09/2018:svnDellInc.:pnInspiron3180:pvr1.3.0:rvnDellInc.:rn0918N8:rvrA00:cvnDellInc.:ct10:cvr1.3.0:
dmi.product.family: Inspiron
dmi.product.name: Inspiron 3180
dmi.product.sku: 087E
dmi.product.version: 1.3.0
dmi.sys.vendor: Dell Inc.
version.compiz: compiz N/A
version.libdrm2: libdrm2 2.4.97-1ubuntu1
version.libgl1-mesa-dri: libgl1-mesa-dri 19.0.2-1ubuntu1.1
version.libgl1-mesa-glx: libgl1-mesa-glx N/A
version.xserver-xorg-core: xserver-xorg-core 2:1.20.4-1ubuntu3
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A
version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A
version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1833617/+subscriptions
** Attachment added: "gnome-system-log.desktop"
https://bugs.launchpad.net/bugs/1833617/+attachment/5310263/+files/gnome-system-log.desktop
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1833617
Title:
[amdgpu] screen freeze after suspend
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1833617/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
