We found that the system is booting into emergency mode due to unable to
mount EFI partition.

I suspect this is points to 18.04 bug. There is no issue with 20.04

Jun 07 17:08:32 test-Alienware-Aurora-R9 kernel: Initramfs unpacking failed: 
Decoding failed
Jun 07 17:08:32 test-Alienware-Aurora-R9 kernel: Freeing initrd memory: 48284K
Jun 07 17:08:33 test-Alienware-Aurora-R9 systemd[1]: Found device PM981a NVMe 
SAMSUNG 2048GB ESP.
Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Mounting /boot/efi...
Jun 07 17:08:34 test-Alienware-Aurora-R9 mount[669]: mount: /boot/efi: wrong fs 
type, bad option, bad superblock on /dev/nvme0n1p1, missing codepage or helper 
program, or other error.
Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Started Emergency Shell.
Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Reached target Emergency 
Mode.

** Description changed:

- Issue:- Getting blank screen after the initial install grub prompt.
+ Issue:- Booting into recovery mode, after post installation
  
- Tried acpi=off, nomodeset parameters added in grub still no luck
+ Tried  nomodeset parameters added in grub, able to install and post
+ installation of NVIDIA-440 , machine booting in recovery mode.
  
  Note:- Ubuntu 20.04 LTS worked without any issues.
  
  Env:-
- 
- ====
- 
+ Dell Alienware Aurora R9
+ Ubuntu 18.04.4 LTS
+ 5.3.0-28-generic 
+ dosfstools  4.1-1
  UEFI - Dual boot, secure boot disabled, SATA to AHCI
- 
  Bios vers - 1.0.7
  
- $find /sys/devices -name "edid"
- 
- /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-1/edid
- 
- /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-1/edid
- 
  $lspci | grep VGA
- 
- 01:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX
- 2080 SUPER] (rev a1)
- 
- 02:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX
- 2080 SUPER] (rev a1)
+    01:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 
2080 SUPER] (rev a1)
+     02:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 
2080 SUPER] (rev a1)
  
  ===
  
- nomodeset:- defined to instructs the kernel to not load video drivers
- and use BIOS modes instead until X is loaded.
+ Below is the journal logs, for the failure of machine boots into
+ emergency mode. For some reasons, while unpacking the initramfs, it's
+ unable to mount the EFI partition and dropping into emergency mode. And
+ it's points bad superblock
+ 
+ Might-be this is a bug in the 18.04. At the same time 20.04 worked
+ without any issues.
+ 
+ ~~~
+ Jun 07 17:08:32 test-Alienware-Aurora-R9 kernel: Initramfs unpacking failed: 
Decoding failed
+ Jun 07 17:08:32 test-Alienware-Aurora-R9 kernel: Freeing initrd memory: 48284K
+ Jun 07 17:08:33 test-Alienware-Aurora-R9 systemd[1]: Found device PM981a NVMe 
SAMSUNG 2048GB ESP.
+ Jun 07 17:08:33 test-Alienware-Aurora-R9 systemd[1]: Starting File System 
Check on /dev/disk/by-uuid/CCF3-E7D6...
+ Jun 07 17:08:33 test-Alienware-Aurora-R9 systemd[1]: Started File System 
Check Daemon to report status.
+ Jun 07 17:08:33 test-Alienware-Aurora-R9 systemd[1]: Found device 
ST2000DM008-2FR102 4.
+ Jun 07 17:08:33 test-Alienware-Aurora-R9 systemd[1]: Activating swap 
/dev/disk/by-uuid/5cfe5c2d-6dd7-46b3-9fce-0e08b35b26cb...
+ Jun 07 17:08:33 test-Alienware-Aurora-R9 systemd[1]: Activated swap 
/dev/disk/by-uuid/5cfe5c2d-6dd7-46b3-9fce-0e08b35b26cb.
+ Jun 07 17:08:33 test-Alienware-Aurora-R9 systemd[1]: Reached target Swap.
+ Jun 07 17:08:33 test-Alienware-Aurora-R9 kernel: Adding 62499836k swap on 
/dev/sda4.  Priority:-2 extents:1 across:62499836k FS
+ Jun 07 17:08:33 test-Alienware-Aurora-R9 systemd-fsck[623]: fsck.fat 4.1 
(2017-01-24)
+ Jun 07 17:08:33 test-Alienware-Aurora-R9 systemd-fsck[623]: /dev/nvme0n1p1: 
389 files, 36496/74752 clusters
+ Jun 07 17:08:33 test-Alienware-Aurora-R9 systemd[1]: Started File System 
Check on /dev/disk/by-uuid/CCF3-E7D6.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Mounting /boot/efi...
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 mount[669]: mount: /boot/efi: wrong 
fs type, bad option, bad superblock on /dev/nvme0n1p1, missing codepage or 
helper program, or other error.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: boot-efi.mount: Mount 
process exited, code=exited status=32
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: boot-efi.mount: Failed 
with result 'exit-code'.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Failed to mount 
/boot/efi.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 kernel: FAT-fs (nvme0n1p1): IO 
charset iso8859-1 not found
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Dependency failed for 
Local File Systems.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Dependency failed for 
Clean up any mess left by 0dns-up.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: dns-clean.service: Job 
dns-clean.service/start failed with result 'dependency'.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: local-fs.target: Job 
local-fs.target/start failed with result 'dependency'.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: local-fs.target: 
Triggering OnFailure= dependencies.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Starting Set console 
font and keymap...
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Started Stop ureadahead 
data collection 45s after completed startup.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Reached target Timers.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Closed Syslog Socket.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Starting Set console 
scheme...
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Reached target Paths.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Reached target Sockets.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Started Emergency Shell.
+ Jun 07 17:08:34 test-Alienware-Aurora-R9 systemd[1]: Reached target Emergency 
Mode.
+ ~~~
  
  
- Please note:- we need to rely on 18.04 LTS due to application
- compatibility.
+ We are able to boot even after passing "nomodeset" in grub
+ 
+ This is a freshly installed machine, and tried with different kernels
+ while switching from higher to lower. In all the case, same result.
+ 
+ This machine consist of two drives SSD and HDD. I suspect it might be
+ caused issue with hardware dependency?
+ 
+ ~~~
+ cat /proc/scsi/scsi
+ Attached devices:
+ Host: scsi0 Channel: 00 Id: 00 Lun: 00
+   Vendor: ATA      Model: ST2000DM008-2FR1 Rev: 0001
+   Type:   Direct-Access                    ANSI  SCSI revision: 05
+ ~~~
  
  Please suggest
+ 
  
  Thanks
  ---
  ProblemType: Bug
  ApportVersion: 2.20.11-0ubuntu27.2
  Architecture: amd64
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/controlC1', 
'/dev/snd/controlC2', '/dev/snd/hwC1D0', '/dev/snd/pcmC1D9p', 
'/dev/snd/pcmC1D8p', '/dev/snd/hwC2D0', '/dev/snd/pcmC2D9p', 
'/dev/snd/pcmC2D8p', '/dev/snd/pcmC1D7p', '/dev/snd/pcmC1D3p', 
'/dev/snd/pcmC2D7p', '/dev/snd/pcmC2D3p', '/dev/snd/by-path', 
'/dev/snd/controlC0', '/dev/snd/hwC0D2', '/dev/snd/hwC0D0', 
'/dev/snd/pcmC0D10p', '/dev/snd/pcmC0D9p', '/dev/snd/pcmC0D8p', 
'/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D2c', 
'/dev/snd/pcmC0D1p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  CasperMD5CheckResult: skip
  DistroRelease: Ubuntu 20.04
  InstallationDate: Installed on 2020-06-04 (1 days ago)
  InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423)
  MachineType: Alienware Alienware Aurora R9
  NonfreeKernelModules: nvidia_modeset nvidia
  Package: linux (not installed)
  ProcFB: 0 EFI VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-33-generic 
root=UUID=6f3dec95-0e04-4bcb-992c-ee9a185fbb34 ro quiet splash vt.handoff=7
  ProcVersionSignature: Ubuntu 5.4.0-33.37-generic 5.4.34
  RelatedPackageVersions:
   linux-restricted-modules-5.4.0-33-generic N/A
   linux-backports-modules-5.4.0-33-generic  N/A
   linux-firmware                            1.187
  Tags:  focal
  Uname: Linux 5.4.0-33-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 12/23/2019
  dmi.bios.vendor: Alienware
  dmi.bios.version: 1.0.7
  dmi.board.name: 0T76PD
  dmi.board.vendor: Alienware
  dmi.board.version: A01
  dmi.chassis.type: 3
  dmi.chassis.vendor: Alienware
  dmi.chassis.version: Not Specified
  dmi.modalias: 
dmi:bvnAlienware:bvr1.0.7:bd12/23/2019:svnAlienware:pnAlienwareAuroraR9:pvr1.0.7:rvnAlienware:rn0T76PD:rvrA01:cvnAlienware:ct3:cvrNotSpecified:
  dmi.product.family: Alienware
  dmi.product.name: Alienware Aurora R9
  dmi.product.sku: 0961
  dmi.product.version: 1.0.7
  dmi.sys.vendor: Alienware
  ---
  ProblemType: Bug
  ApportVersion: 2.20.9-0ubuntu7.9
  Architecture: amd64
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/controlC0', 
'/dev/snd/hwC0D2', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D2c', '/dev/snd/pcmC0D1p', 
'/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/by-path', 
'/dev/snd/controlC2', '/dev/snd/controlC1', '/dev/snd/hwC2D0', 
'/dev/snd/pcmC2D9p', '/dev/snd/pcmC2D8p', '/dev/snd/hwC1D0', 
'/dev/snd/pcmC1D9p', '/dev/snd/pcmC1D8p', '/dev/snd/pcmC2D7p', 
'/dev/snd/pcmC2D3p', '/dev/snd/pcmC1D7p', '/dev/snd/pcmC1D3p', '/dev/snd/seq', 
'/dev/snd/timer'] failed with exit code 1:
  DistroRelease: Ubuntu 18.04
  InstallationDate: Installed on 2020-06-07 (0 days ago)
  InstallationMedia: Ubuntu 18.04.4 LTS "Bionic Beaver" - Release amd64 
(20200203.1)
  MachineType: Alienware Alienware Aurora R9
  Package: linux (not installed)
  ProcFB: 0 EFI VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-28-generic 
root=UUID=6f3dec95-0e04-4bcb-992c-ee9a185fbb34 ro nomodeset
  ProcVersionSignature: Ubuntu 5.3.0-28.30~18.04.1-generic 5.3.13
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions:
   linux-restricted-modules-5.3.0-28-generic N/A
   linux-backports-modules-5.3.0-28-generic  N/A
   linux-firmware                            1.173.14
  Tags:  bionic
  Uname: Linux 5.3.0-28-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
  _MarkForUpload: True
  dmi.bios.date: 12/23/2019
  dmi.bios.vendor: Alienware
  dmi.bios.version: 1.0.7
  dmi.board.name: 0T76PD
  dmi.board.vendor: Alienware
  dmi.board.version: A01
  dmi.chassis.type: 3
  dmi.chassis.vendor: Alienware
  dmi.chassis.version: Not Specified
  dmi.modalias: 
dmi:bvnAlienware:bvr1.0.7:bd12/23/2019:svnAlienware:pnAlienwareAuroraR9:pvr1.0.7:rvnAlienware:rn0T76PD:rvrA01:cvnAlienware:ct3:cvrNotSpecified:
  dmi.product.family: Alienware
  dmi.product.name: Alienware Aurora R9
  dmi.product.sku: 0961
  dmi.product.version: 1.0.7
  dmi.sys.vendor: Alienware

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1882195

Title:
  Dell Alienware Aurora R9 ubuntu 18.04LTS installation issue - Dual
  boot - UEFI

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1882195/+subscriptions

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to