Public bug reported: (base) jb@harshit-ubuntu:~$ # finish any partial work first sudo apt --fix-broken install -y sudo dpkg --configure -a
# update and attempt the downgrade to the jammy versions sudo apt update sudo apt install --allow-downgrades libc6:i386=2.35-0ubuntu3.11 locales=2.35-0ubuntu3.11 libnsl-dev=1.3.0-2build2 -y # then finish configuring/upgrading sudo apt --fix-broken install -y sudo dpkg --configure -a sudo apt upgrade -y Reading package lists... Done Building dependency tree... Done Reading state information... Done Correcting dependencies... failed. The following packages have unmet dependencies: libnsl-dev : Depends: libnsl2 (= 1.3.0-3build3) but 1.3.0-2build2 is installed locales : Depends: libc-bin (> 2.39) E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. E: Unable to correct dependencies dpkg: dependency problems prevent configuration of locales: locales depends on libc-bin (>> 2.39); however: Version of libc-bin on system is 2.35-0ubuntu3.11. dpkg: error processing package locales (--configure): dependency problems - leaving unconfigured dpkg: error processing package libc6:i386 (--configure): package libc6:i386 cannot be configured because libc6:amd64 is not ready (current status 'half-installed') dpkg: dependency problems prevent configuration of libnsl-dev:amd64: libnsl-dev:amd64 depends on libnsl2 (= 1.3.0-3build3); however: Version of libnsl2:amd64 on system is 1.3.0-2build2. dpkg: error processing package libnsl-dev:amd64 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent processing triggers for man-db: man-db depends on libc6 (>= 2.34); however: Package libc6:amd64 is not installed. dpkg: error processing package man-db (--configure): dependency problems - leaving triggers unprocessed dpkg: dependency problems prevent processing triggers for libc-bin: libc-bin depends on libc6 (>> 2.35); however: Package libc6:amd64 is not installed. libc-bin depends on libc6 (<< 2.36); however: Package libc6:amd64 is not installed. dpkg: error processing package libc-bin (--configure): dependency problems - leaving triggers unprocessed Errors were encountered while processing: locales libc6:i386 libnsl-dev:amd64 man-db libc-bin Hit:1 http://in.archive.ubuntu.com/ubuntu jammy InRelease Hit:2 http://in.archive.ubuntu.com/ubuntu jammy-updates InRelease Hit:3 http://in.archive.ubuntu.com/ubuntu jammy-backports InRelease Get:4 http://security.ubuntu.com/ubuntu jammy-security InRelease [129 kB] Get:5 http://security.ubuntu.com/ubuntu jammy-security/main amd64 DEP-11 Metadata [54.6 kB] Get:6 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 DEP-11 Metadata [208 B] Hit:7 https://ppa.launchpadcontent.net/obsproject/obs-studio/ubuntu jammy InRelease Get:8 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 DEP-11 Metadata [125 kB] Get:9 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 DEP-11 Metadata [208 B] Fetched 309 kB in 2s (134 kB/s) Reading package lists... Done Building dependency tree... Done Reading state information... Done 24 packages can be upgraded. Run 'apt list --upgradable' to see them. Reading package lists... Done Building dependency tree... Done Reading state information... Done libc6:i386 is already the newest version (2.35-0ubuntu3.11). libc6:i386 set to manually installed. The following packages were automatically installed and are no longer required: catch2 cmake cmake-data cppcheck dh-elpa-helper docutils-common fonts-lyx google-mock googletest libasound2-dev libassimp-dev libassimp5 libbullet-dev libbullet3.06 libconsole-bridge-dev libconsole-bridge1.0 libdc1394-25 libdc1394-dev libdecor-0-dev libdraco-dev libdraco4 libdrm-dev libexif-dev libexif-doc libfmt-dev libfmt8 libgbm-dev libgdcm-dev libgphoto2-dev libgtest-dev libibus-1.0-dev libignition-cmake2-dev libignition-math6 libignition-math6-dev libilmbase-dev libilmbase25 libjs-jquery-hotkeys libjs-jquery-isonscreen libjs-jquery-metadata libjs-jquery-tablesorter libjs-jquery-throttle-debounce liblbfgsb0 liblept5 libopencv-calib3d-dev libopencv-calib3d4.5d libopencv-contrib-dev libopencv-contrib4.5d libopencv-core-dev libopencv-core4.5d libopencv-dev libopencv-dnn-dev libopencv-dnn4.5d libopencv-features2d-dev libopencv-features2d4.5d libopencv-flann-dev libopencv-flann4.5d libopencv-highgui-dev libopencv-highgui4.5d libopencv-imgcodecs-dev libopencv-imgcodecs4.5d libopencv-imgproc-dev libopencv-imgproc4.5d libopencv-ml-dev libopencv-ml4.5d libopencv-objdetect-dev libopencv-objdetect4.5d libopencv-photo-dev libopencv-photo4.5d libopencv-shape-dev libopencv-shape4.5d libopencv-stitching-dev libopencv-stitching4.5d libopencv-superres-dev libopencv-superres4.5d libopencv-video-dev libopencv-video4.5d libopencv-videoio-dev libopencv-videoio4.5d libopencv-videostab-dev libopencv-videostab4.5d libopencv-viz-dev libopencv-viz4.5d libopencv4.5-java libopencv4.5d-jni libopenexr-dev libopenexr25 liborocos-kdl-dev liborocos-kdl1.5 libpciaccess-dev libpulse-dev libpyside2-dev libraw1394-dev libraw1394-tools librhash0 libsdl2-dev libshiboken2-dev libsndio-dev libsndio7.0 libspdlog-dev libspdlog1 libtbb2 libtesseract4 libtinyxml-dev libtinyxml2-9 libtinyxml2-dev libudev-dev libxaw7-dev libxmu-dev libxmu-headers libxpm-dev libxsimd-dev libxv-dev libxxf86vm-dev libyaml-cpp-dev libyaml-cpp0.7 libyaml-dev libz3-4 mercurial mercurial-common nvidia-firmware-570-570.133.07 nvidia-firmware-570-570.172.08 opencv-data pybind11-dev pydocstyle pyflakes3 pyqt5-dev python-matplotlib-data python3-appdirs python3-beniget python3-brotli python3-bs4 python3-colcon-argcomplete python3-colcon-bash python3-colcon-cd python3-colcon-cmake python3-colcon-core python3-colcon-defaults python3-colcon-devtools python3-colcon-installed-package-information python3-colcon-library-path python3-colcon-metadata python3-colcon-mixin python3-colcon-notification python3-colcon-output python3-colcon-override-check python3-colcon-package-information python3-colcon-package-selection python3-colcon-parallel-executor python3-colcon-pkg-config python3-colcon-powershell python3-colcon-python-setup-py python3-colcon-recursive-crawl python3-colcon-test-result python3-colcon-zsh python3-cov-core python3-coverage python3-cycler python3-decorator python3-distlib python3-docutils python3-empy python3-flake8 python3-fonttools python3-fs python3-gast python3-html5lib python3-kiwisolver python3-lark python3-lxml python3-lz4 python3-matplotlib python3-mccabe python3-mpmath python3-nose2 python3-opencv python3-ply python3-pycodestyle python3-pydocstyle python3-pydot python3-pyflakes python3-pykdl python3-pyside2.qtsvg python3-pytest-cov python3-pythran python3-roman python3-scipy python3-sip python3-sip-dev python3-snowballstemmer python3-soupsieve python3-sympy python3-ufolib2 python3-unicodedata2 python3-vcstool python3-vcstools python3-webencodings shiboken2 sip-dev tango-icon-theme uncrustify unicode-data Use 'sudo apt autoremove' to remove them. The following packages will be DOWNGRADED: libnsl-dev locales 0 upgraded, 0 newly installed, 2 downgraded, 0 to remove and 24 not upgraded. 4 not fully installed or removed. Need to get 0 B/7,554 kB of archives. After this operation, 366 kB of additional disk space will be used. Preconfiguring packages ... dpkg: error processing package libc6:amd64 (--configure): package libc6:amd64 is not ready for configuration cannot configure (current status 'half-installed') Errors were encountered while processing: libc6:amd64 E: Sub-process /usr/bin/dpkg returned an error code (1) Reading package lists... Done Building dependency tree... Done Reading state information... Done Correcting dependencies... failed. The following packages have unmet dependencies: libnsl-dev : Depends: libnsl2 (= 1.3.0-3build3) but 1.3.0-2build2 is installed locales : Depends: libc-bin (> 2.39) E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. E: Unable to correct dependencies dpkg: dependency problems prevent configuration of locales: locales depends on libc-bin (>> 2.39); however: Version of libc-bin on system is 2.35-0ubuntu3.11. dpkg: error processing package locales (--configure): dependency problems - leaving unconfigured dpkg: error processing package libc6:i386 (--configure): package libc6:i386 cannot be configured because libc6:amd64 is not ready (current status 'half-installed') dpkg: dependency problems prevent configuration of libnsl-dev:amd64: libnsl-dev:amd64 depends on libnsl2 (= 1.3.0-3build3); however: Version of libnsl2:amd64 on system is 1.3.0-2build2. dpkg: error processing package libnsl-dev:amd64 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent processing triggers for man-db: man-db depends on libc6 (>= 2.34); however: Package libc6:amd64 is not installed. dpkg: error processing package man-db (--configure): dependency problems - leaving triggers unprocessed dpkg: dependency problems prevent processing triggers for libc-bin: libc-bin depends on libc6 (>> 2.35); however: Package libc6:amd64 is not installed. libc-bin depends on libc6 (<< 2.36); however: Package libc6:amd64 is not installed. dpkg: error processing package libc-bin (--configure): dependency problems - leaving triggers unprocessed Errors were encountered while processing: locales libc6:i386 libnsl-dev:amd64 man-db libc-bin Reading package lists... Done Building dependency tree... Done Reading state information... Done You might want to run 'apt --fix-broken install' to correct these. The following packages have unmet dependencies: libnsl-dev : Depends: libnsl2 (= 1.3.0-3build3) but 1.3.0-2build2 is installed locales : Depends: libc-bin (> 2.39) E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution). ProblemType: Package DistroRelease: Ubuntu 22.04 Package: libc6:amd64 2.35-0ubuntu3.11 ProcVersionSignature: Ubuntu 6.8.0-85.85~22.04.1-generic 6.8.12 Uname: Linux 6.8.0-85-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.10 AptOrdering: libc6:amd64: Configure locales:amd64: Install libnsl-dev:amd64: Install NULL: ConfigurePending Architecture: amd64 CasperMD5CheckResult: pass Date: Mon Oct 27 17:28:53 2025 DpkgTerminalLog: [1mdpkg:[0m error processing package libc6:amd64 (--configure): package libc6:amd64 is not ready for configuration cannot configure (current status 'half-installed') ErrorMessage: package libc6:amd64 is not ready for configuration cannot configure (current status 'half-installed') InstallationDate: Installed on 2025-05-02 (177 days ago) InstallationMedia: Ubuntu 22.04.5 LTS "Jammy Jellyfish" - Release amd64 (20240911) Python3Details: /usr/bin/python3.10, Python 3.10.12, python3-minimal, 3.10.6-1~22.04.1 PythonDetails: N/A RelatedPackageVersions: dpkg 1.21.1ubuntu2.6 apt 2.4.14 SourcePackage: glibc Title: package libc6:amd64 2.35-0ubuntu3.11 failed to install/upgrade: package libc6:amd64 is not ready for configuration cannot configure (current status 'half-installed') UpgradeStatus: Upgraded to jammy on 2025-10-19 (8 days ago) ** Affects: glibc (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package jammy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2129932 Title: package libc6:amd64 2.35-0ubuntu3.11 failed to install/upgrade: package libc6:amd64 is not ready for configuration cannot configure (current status 'half-installed') To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/glibc/+bug/2129932/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
