lshal
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'
(string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'UHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1d.1' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.22-14-generic uhci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
(string)
info.product = 'USB Raw Device Access' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_usbraw'
(string)
linux.device_file = '/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev2.1' (string)
usbraw.device = '/dev/bus/usb/002/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
(string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
(string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'
(string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'
(string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1d.1' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.22-14-generic uhci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_24c2'
info.bus = 'pci' (string)
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1'
(string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_24c2' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
pci.product = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1'
(string)
pci.product_id = 9410 (0x24c2) (int)
pci.subsys_product_id = 21063 (0x5247) (int)
pci.subsys_vendor = 'Intel Corporation' (string)
pci.subsys_vendor_id = 32902 (0x8086) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_24c2' (string)
info.product = 'UHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
(string)
info.vendor = 'Linux 2.6.22-14-generic uhci_hcd' (string)
linux.device_file = '/dev/usb1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'
(string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'UHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1d.0' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.22-14-generic uhci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
(string)
info.product = 'USB Raw Device Access' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_usbraw'
(string)
linux.device_file = '/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev1.1' (string)
usbraw.device = '/dev/bus/usb/001/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_LMMQR0409162331440'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
(string)
info.product = 'USB Printer' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_LMMQR0409162331440'
(string)
info.vendor = 'EPSON' (string)
linux.device_file = '/dev/1-2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 256 (0x100) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 4 (0x4) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2'
(string)
usb_device.max_power = 2 (0x2) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'USB Printer' (string)
usb_device.product_id = 5 (0x5) (int)
usb_device.serial = 'LMMQR0409162331440' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'EPSON' (string)
usb_device.vendor_id = 1208 (0x4b8) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_LMMQR0409162331440_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent =
'/org/freedesktop/Hal/devices/usb_device_4b8_5_LMMQR0409162331440' (string)
info.product = 'USB Raw Device Access' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_4b8_5_LMMQR0409162331440_usbraw'
(string)
linux.device_file = '/dev/bus/usb/001/004' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev1.4' (string)
usbraw.device = '/dev/bus/usb/001/004' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_LMMQR0409162331440_if0'
info.bus = 'usb' (string)
info.linux.driver = 'usblp' (string)
info.parent =
'/org/freedesktop/Hal/devices/usb_device_4b8_5_LMMQR0409162331440' (string)
info.product = 'USB Printer Interface' (string)
info.subsystem = 'usb' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_4b8_5_LMMQR0409162331440_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0'
(string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 256 (0x100) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 7 (0x7) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 2 (0x2) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 4 (0x4) (int)
usb.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0' (string)
usb.max_power = 2 (0x2) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Printer Interface' (string)
usb.product_id = 5 (0x5) (int)
usb.serial = 'LMMQR0409162331440' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'EPSON' (string)
usb.vendor_id = 1208 (0x4b8) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)
udi =
'/org/freedesktop/Hal/devices/usb_device_4b8_5_LMMQR0409162331440_if0_printer_noserial'
info.addons = {'hal_lpadmin --add'} (string list)
info.callouts.remove = {'hal_lpadmin --remove'} (string list)
info.capabilities = {'printer'} (string list)
info.category = 'printer' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Printer'} (string list)
info.parent =
'/org/freedesktop/Hal/devices/usb_device_4b8_5_LMMQR0409162331440_if0' (string)
info.product = 'Stylus C86' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_4b8_5_LMMQR0409162331440_if0_printer_noserial'
(string)
info.vendor = 'EPSON' (string)
linux.device_file = '/dev/usb/lp0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/class/usb/lp0' (string)
org.freedesktop.Hal.Device.Printer.method_argnames = {'make model'} (string
list)
org.freedesktop.Hal.Device.Printer.method_execpaths = {'hal_lpadmin
--configure'} (string list)
org.freedesktop.Hal.Device.Printer.method_names = {'Configure'} (string list)
org.freedesktop.Hal.Device.Printer.method_signatures = {'ss'} (string list)
printer.commandset = {'ESCPL2', 'BDC', 'D4'} (string list)
printer.description = 'EPSON Stylus C86' (string)
printer.device = '/dev/usb/lp0' (string)
printer.originating_device =
'/org/freedesktop/Hal/devices/usb_device_4b8_5_LMMQR0409162331440_if0' (string)
printer.physical_device =
'/org/freedesktop/Hal/devices/usb_device_4b8_5_LMMQR0409162331440_if0' (string)
printer.product = 'Stylus C86' (string)
printer.vendor = 'EPSON' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_545_8333_noserial'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
(string)
info.product = 'Unknown (0x8333)' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_545_8333_noserial'
(string)
info.vendor = 'Unknown (0x0545)' (string)
linux.device_file = '/dev/1-1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 255 (0xff) (int)
usb_device.device_protocol = 255 (0xff) (int)
usb_device.device_revision_bcd = 1 (0x1) (int)
usb_device.device_subclass = 255 (0xff) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 3 (0x3) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1'
(string)
usb_device.max_power = 100 (0x64) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product_id = 33587 (0x8333) (int)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor_id = 1349 (0x545) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_545_8333_noserial_video4linux'
info.capabilities = {'video4linux'} (string list)
info.category = 'video4linux' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_545_8333_noserial'
(string)
info.product = 'Video Device' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_545_8333_noserial_video4linux'
(string)
linux.device_file = '/dev/video0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'video4linux' (string)
linux.sysfs_path = '/sys/class/video4linux/video0' (string)
video4linux.device = '/dev/video0' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_545_8333_noserial_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_545_8333_noserial'
(string)
info.product = 'USB Raw Device Access' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_545_8333_noserial_usbraw'
(string)
linux.device_file = '/dev/bus/usb/001/003' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev1.3' (string)
usbraw.device = '/dev/bus/usb/001/003' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_545_8333_noserial_if0'
info.bus = 'usb' (string)
info.linux.driver = 'gspca' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_545_8333_noserial'
(string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_545_8333_noserial_if0'
(string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0'
(string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 255 (0xff) (int)
usb.device_protocol = 255 (0xff) (int)
usb.device_revision_bcd = 1 (0x1) (int)
usb.device_subclass = 255 (0xff) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 3 (0x3) (int)
usb.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 33587 (0x8333) (int)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor_id = 1349 (0x545) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
(string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
(string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'
(string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'
(string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1d.0' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.22-14-generic uhci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2561'
info.bus = 'pci' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2561' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string)
pci.product = '82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge' (string)
pci.product_id = 9569 (0x2561) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_2e1'
info.bus = 'pci' (string)
info.linux.driver = 'nvidia' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2561' (string)
info.product = 'G73 [GeForce 7600 GS]' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_2e1' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
(string)
pci.device_class = 3 (0x3) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
(string)
pci.product = 'G73 [GeForce 7600 GS]' (string)
pci.product_id = 737 (0x2e1) (int)
pci.subsys_product_id = 1600 (0x640) (int)
pci.subsys_vendor = 'Micro-Star International Co., Ltd.' (string)
pci.subsys_vendor_id = 5218 (0x1462) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2560'
info.bus = 'pci' (string)
info.linux.driver = 'agpgart-intel' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub
Interface' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2560' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.product = '82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub
Interface' (string)
pci.product_id = 9568 (0x2560) (int)
pci.subsys_product_id = 9568 (0x2560) (int)
pci.subsys_vendor = 'Intel Corporation' (string)
pci.subsys_vendor_id = 32902 (0x8086) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
Dumped 114 device(s) from the Global Device List.
------------------------------------------------
[EMAIL PROTECTED]:~$
--
permission denied while automounting removable device
https://bugs.launchpad.net/bugs/119394
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
