In reviewing installation logs from previous kernels I found one for Feisty (2.6.20-15-generic) that didn't suffer the aacraid problems. The pertinent part where aacraid initialises is this:
Jul 6 08:12:57 kernel: [ 5.385325] libata version 2.20 loaded. Jul 6 08:12:57 kernel: [ 5.393187] Adaptec aacraid driver (1.1-5[2423]-mh3) Jul 6 08:12:57 kernel: [ 5.408009] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver Jul 6 08:12:57 kernel: [ 5.775027] input: PS/2 Generic Mouse as /class/input/input2 Jul 6 08:12:57 kernel: [ 20.336635] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 Jul 6 08:12:57 kernel: [ 20.336641] <Adaptec aic7890/91 Ultra2 SCSI adapter> Jul 6 08:12:57 kernel: [ 20.336647] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs Jul 6 08:12:57 kernel: [ 20.336653] Jul 6 08:12:57 kernel: [ 20.337314] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 22 (level, low) -> IRQ 17 Jul 6 08:12:57 kernel: [ 35.547156] scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 Jul 6 08:12:57 kernel: [ 35.547163] <Adaptec aic7890/91 Ultra2 SCSI adapter> Jul 6 08:12:57 kernel: 9] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs Jul 6 08:12:57 kernel: [ 35.547175] Jul 6 08:12:57 kernel: [ 35.547775] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 18 Jul 6 08:12:57 kernel: [ 50.561757] scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 Jul 6 08:12:57 kernel: [ 50.561764] <Adaptec aic7860 Ultra SCSI adapter> Jul 6 08:12:57 kernel: [ 50.561769] aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs Jul 6 08:12:57 kernel: [ 50.561775] Jul 6 08:12:57 kernel: [ 50.564505] ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 11 Jul 6 08:12:57 kernel: [ 50.564580] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNK8] -> GSI 11 (level, low) -> IRQ 11 Jul 6 08:12:57 kernel: [ 50.573857] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 18 (level, low) -> IRQ 19 Jul 6 08:12:57 kernel: [ 50.606049] AAC0: kernel 2.8-0[6089] Jul 6 08:12:57 kernel: [ 50.606113] AAC0: monitor 2.8-0[6089] Jul 6 08:12:57 kernel: [ 50.606175] AAC0: bios 2.8-0[6089] Jul 6 08:12:57 kernel: [ 50.606234] AAC0: serial 8a0376 Jul 6 08:12:57 kernel: [ 50.606717] scsi3 : percraid Jul 6 08:12:57 kernel: [ 50.607327] scsi 3:0:0:0: Direct-Access DELL Array1 V1.0 PQ: 0 ANSI: 2 Jul 6 08:12:57 kernel: [ 50.607737] scsi 3:0:1:0: Direct-Access DELL Archive V1.0 PQ: 0 ANSI: 2 Jul 6 08:12:57 kernel: [ 51.881025] scsi 2:0:5:0: CD-ROM NEC CD-ROM DRIVE:466 1.06 PQ: 0 ANSI: 2 Jul 6 08:12:57 kernel: [ 51.881144] target2:0:5: Beginning Domain Validation Jul 6 08:12:57 kernel: [ 51.884397] target2:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15) Jul 6 08:12:57 kernel: [ 51.887587] target2:0:5: Domain Validation skipping write tests Jul 6 08:12:57 kernel: [ 51.887656] target2:0:5: Ending Domain Validation Jul 6 08:12:57 kernel: [ 65.776294] scsi4 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 Jul 6 08:12:57 kernel: [ 65.776302] <Adaptec 2940 Ultra2 SCSI adapter> Jul 6 08:12:57 kernel: [ 65.776307] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs Jul 6 08:12:57 kernel: [ 65.776313] -- -server kernel variant fails to boot on PowerEdge 2650 with AACRAID timeouts https://bugs.launchpad.net/bugs/149071 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
