There seems to be a problem with the cdimage server containing the
Feisty Server CD image (long time outs, less than 1KB/s transfer rate)
so I've installed Feisty Alternate x86 command-line on the Dell
PowerEdge 6300/550 in order to get some information on the hardware.
Note that after the installer reboots the system the PERC/2 controller
reports unflushed data in the cache and refuses to boot the kernel. It
requires a power-off followed by a full system memory count (which can
take over 5 minutes) to clear the situation.
$ uname -a
Linux PowerEdge6300 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686
GNU/Linux
The PERC/2 controller is:
03:03.0 RAID bus controller [0104]: Digital Equipment Corporation DECchip 21554
[1011:0046] (rev 01)
It is managed by aacraid:
~$ modinfo aacraid
filename:
/lib/modules/2.6.20-15-generic/kernel/drivers/scsi/aacraid/aacraid.ko
version: 1.1-5[2423]-mh3
license: GPL
description: Dell PERC2, 2/Si, 3/Si, 3/Di, Adaptec Advanced Raid Products,
HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver
author: Red Hat Inc and Adaptec
srcversion: 9F4AEF75C12F7128F830FA2
depends: scsi_mod
vermagic: 2.6.20-15-generic SMP mod_unload 586
$ lspci -nnn
00:02.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA
[8086:7110] (rev 02)
00:02.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE
[8086:7111] (rev 01)
00:02.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB
[8086:7112] (rev 01)
00:02.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 02)
00:04.0 VGA compatible controller [0300]: ATI Technologies Inc 3D Rage Pro
[1002:4749] (rev 5c)
00:08.0 SCSI storage controller [0100]: Adaptec AHA-2940U2/U2W [9005:0010]
00:0a.0 PCI bridge [0604]: Intel Corporation 21154 PCI-to-PCI Bridge [8086:b154]
00:10.0 Host bridge [0600]: Intel Corporation 450NX - 82451NX Memory & I/O
Controller [8086:84ca] (rev 03)
00:12.0 Host bridge [0600]: Intel Corporation 450NX - 82454NX/84460GX PCI
Expander Bridge [8086:84cb] (rev 04)
00:13.0 Host bridge [0600]: Intel Corporation 450NX - 82454NX/84460GX PCI
Expander Bridge [8086:84cb] (rev 04)
00:14.0 Host bridge [0600]: Intel Corporation 450NX - 82454NX/84460GX PCI
Expander Bridge [8086:84cb] (rev 04)
01:04.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro
100] [8086:1229] (rev 0d)
01:05.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro
100] [8086:1229] (rev 0d)
02:04.0 SCSI storage controller [0100]: Adaptec AHA-2940U2/U2W / 7890/7891
[9005:001f]
02:06.0 SCSI storage controller [0100]: Adaptec AHA-2940U2/U2W / 7890/7891
[9005:001f]
02:08.0 SCSI storage controller [0100]: Adaptec AIC-7860 [9004:6078] (rev 03)
03:03.0 RAID bus controller [0104]: Digital Equipment Corporation DECchip 21554
[1011:0046] (rev 01)
$ lsmod | grep aac
aacraid 59652 2
scsi_mod 142348 8
st,sr_mod,sg,sd_mod,aacraid,aic7xxx,scsi_transport_spi,libata
$ grep -i aac /var/log/kern.log
Apr 3 18:07:41 PowerEdge6300 kernel: [ 6.394845] Adaptec aacraid driver
(1.1-5[2423]-mh3)
Apr 3 18:07:41 PowerEdge6300 kernel: [ 51.623757] AAC0: kernel 2.8-0[6089]
Apr 3 18:07:41 PowerEdge6300 kernel: [ 51.623770] AAC0: monitor 2.8-0[6089]
Apr 3 18:07:41 PowerEdge6300 kernel: [ 51.623779] AAC0: bios 2.8-0[6089]
Apr 3 18:07:41 PowerEdge6300 kernel: [ 51.623787] AAC0: serial 8a0376
$ egrep -i 'scsi3|3:0:' /var/log/kern.log
Apr 3 18:07:41 PowerEdge6300 kernel: [ 51.624202] scsi3 : percraid
Apr 3 18:07:41 PowerEdge6300 kernel: [ 51.624823] scsi 3:0:0:0:
Direct-Access DELL Array1 V1.0 PQ: 0 ANSI: 2
Apr 3 18:07:41 PowerEdge6300 kernel: [ 51.625185] scsi 3:0:1:0:
Direct-Access DELL Archive V1.0 PQ: 0 ANSI: 2
Apr 3 18:07:41 PowerEdge6300 kernel: [ 66.973120] sd 3:0:0:0: Attached scsi
removable disk sda
Apr 3 18:07:41 PowerEdge6300 kernel: [ 66.974231] sd 3:0:1:0: Attached scsi
removable disk sdb
Apr 3 18:07:41 PowerEdge6300 kernel: [ 66.997669] sd 3:0:0:0: Attached scsi
generic sg1 type 0
Apr 3 18:07:41 PowerEdge6300 kernel: [ 66.998217] sd 3:0:1:0: Attached scsi
generic sg2 type 0
Apr 3 18:07:41 PowerEdge6300 kernel: [ 67.016451] sr0: scsi3-mmc drive:
17x/40x cd/rw xa/form2 cdda tray
** Also affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
-server kernel variant fails to boot on PowerEdge 2650 with AACRAID timeouts
https://bugs.launchpad.net/bugs/149071
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
