*** This bug is a duplicate of bug 212271 ***
https://bugs.launchpad.net/bugs/212271
Hi Thom
here is my dmesg, lsmod and lspci.
1. dmesg
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dec00000)
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 -
0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 129906
[ 0.000000] Kernel command line:
root=UUID=0eafdf36-1390-4e01-9401-525904fe33e6 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 2660.041 MHz processor.
[ 16.319149] Console: colour VGA+ 80x25
[ 16.319153] console [tty0] enabled
[ 16.319389] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 16.319617] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.329020] Memory: 506772k/523712k available (2164k kernel code, 16308k
reserved, 1006k data, 364k init, 0k highmem)
[ 16.329029] virtual kernel memory layout:
[ 16.329031] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 16.329032] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.329033] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 16.329034] lowmem : 0xc0000000 - 0xdff70000 ( 511 MB)
[ 16.329035] .init : 0xc041f000 - 0xc047a000 ( 364 kB)
[ 16.329037] .data : 0xc031d1cd - 0xc0418dc4 (1006 kB)
[ 16.329038] .text : 0xc0100000 - 0xc031d1cd (2164 kB)
[ 16.329041] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 16.329076] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1,
Nodes=1
[ 16.408901] Calibrating delay using timer specific routine.. 5324.75
BogoMIPS (lpj=10649511)
[ 16.408925] Security Framework initialized
[ 16.408932] SELinux: Disabled at boot.
[ 16.408946] AppArmor: AppArmor initialized
[ 16.408951] Failure registering capabilities with primary security module.
[ 16.408960] Mount-cache hash table entries: 512
[ 16.409092] CPU: After generic identify, caps: bfebfbff 00000000 00000000
00000000 00004400 00000000 00000000 00000000
[ 16.409106] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 16.409109] CPU: L2 cache: 512K
[ 16.409111] CPU: Hyper-Threading is disabled
[ 16.409113] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080
00004400 00000000 00000000 00000000
[ 16.409124] Compat vDSO mapped to ffffe000.
[ 16.409137] Checking 'hlt' instruction... OK.
[ 16.425233] SMP alternatives: switching to UP code
[ 16.426779] Freeing SMP alternatives: 11k freed
[ 16.426909] Early unpacking initramfs... done
[ 16.758476] ACPI: Core revision 20070126
[ 16.770979] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 16.795379] CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09
[ 16.795421] Total of 1 processors activated (5324.75 BogoMIPS).
[ 16.795554] ENABLING IO-APIC IRQs
[ 16.795734] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 16.939658] Brought up 1 CPUs
[ 16.939679] CPU0 attaching sched-domain:
[ 16.939683] domain 0: span 01
[ 16.939685] groups: 01
[ 16.939871] net_namespace: 64 bytes
[ 16.939883] Booting paravirtualized kernel on bare hardware
[ 16.940508] Time: 20:31:06 Date: 04/10/08
[ 16.940565] NET: Registered protocol family 16
[ 16.940794] EISA bus registered
[ 16.940820] ACPI: bus type pci registered
[ 16.940998] PCI: PCI BIOS revision 2.10 entry at 0xfbb16, last bus=2
[ 16.941001] PCI: Using configuration type 1
[ 16.941002] Setting up standard PCI resources
[ 16.942693] ACPI: EC: Look up EC in DSDT
[ 16.970918] ACPI: Interpreter enabled
[ 16.970922] ACPI: (supports S0 S1 S3 S4 S5)
[ 16.970940] ACPI: Using IOAPIC for interrupt routing
[ 17.000005] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.000516] HPET at base address 0xfed00000
[ 17.000523] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 17.000527] PCI quirk: region 0880-08bf claimed by ICH4 GPIO
[ 17.001109] PCI: Transparent bridge - 0000:00:1e.0
[ 17.001134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.001585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 17.105188] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 17.105508] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 17.105822] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 17.106138] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 17.106453] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 17.106768] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 17.107083] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 17.107403] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 17.107623] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.107659] pnp: PnP ACPI init
[ 17.107668] ACPI: bus type pnp registered
[ 17.130831] pnp: PnP ACPI: found 12 devices
[ 17.130834] ACPI: ACPI bus type pnp unregistered
[ 17.130839] PnPBIOS: Disabled by ACPI PNP
[ 17.131091] PCI: Using ACPI for IRQ routing
[ 17.131095] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 17.155096] NET: Registered protocol family 8
[ 17.155099] NET: Registered protocol family 20
[ 17.155224] hpet clockevent registered
[ 17.155230] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 17.155235] hpet0: 3 64-bit timers, 14318180 Hz
[ 17.156274] AppArmor: AppArmor Filesystem Enabled
[ 17.159078] Time: tsc clocksource has been installed.
[ 17.167105] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 17.167109] system 00:00: iomem range 0x100000-0xffffff could not be reserved
[ 17.167111] system 00:00: iomem range 0x1000000-0x1ff6ffff could not be
reserved
[ 17.167114] system 00:00: iomem range 0xc0000-0xfffff could not be reserved
[ 17.167117] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be
reserved
[ 17.167120] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be
reserved
[ 17.167123] system 00:00: iomem range 0xfed20000-0xfed8ffff could not be
reserved
[ 17.167126] system 00:00: iomem range 0xfecf0000-0xfecf0fff could not be
reserved
[ 17.167129] system 00:00: iomem range 0xffb00000-0xffbfffff could not be
reserved
[ 17.167131] system 00:00: iomem range 0xffc00000-0xffffffff could not be
reserved
[ 17.167144] system 00:0b: ioport range 0x800-0x85f has been reserved
[ 17.167147] system 00:0b: ioport range 0xc00-0xc7f has been reserved
[ 17.167150] system 00:0b: ioport range 0x860-0x8ff could not be reserved
[ 17.197552] PCI: Bridge: 0000:00:01.0
[ 17.197554] IO window: disabled.
[ 17.197560] MEM window: fc000000-feafffff
[ 17.197564] PREFETCH window: d8000000-efffffff
[ 17.197570] PCI: Bridge: 0000:00:1e.0
[ 17.197574] IO window: d000-dfff
[ 17.197579] MEM window: fbf00000-fbffffff
[ 17.197583] PREFETCH window: disabled.
[ 17.197601] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 17.197613] NET: Registered protocol family 2
[ 17.234979] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 17.235231] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 17.235300] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 17.235369] TCP: Hash tables configured (established 16384 bind 16384)
[ 17.235372] TCP reno registered
[ 17.247006] checking if image is initramfs... it is
[ 17.657872] Switched to high resolution mode on CPU 0
[ 17.894141] Freeing initrd memory: 7683k freed
[ 17.894305] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[ 17.894307] Simple Boot Flag at 0x7a set to 0x1
[ 17.894733] audit: initializing netlink socket (disabled)
[ 17.894748] audit(1207859467.464:1): initialized
[ 17.896919] VFS: Disk quotas dquot_6.5.1
[ 17.897002] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.897157] io scheduler noop registered
[ 17.897160] io scheduler anticipatory registered
[ 17.897162] io scheduler deadline registered
[ 17.897175] io scheduler cfq registered (default)
[ 17.897274] Boot video device is 0000:01:00.0
[ 17.897282] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled,
disabling
[ 17.897582] isapnp: Scanning for PnP cards...
[ 18.250755] isapnp: No Plug & Play device found
[ 18.282537] Real Time Clock Driver v1.12ac
[ 18.282628] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 18.282750] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.283581] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.284689] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 18.284764] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 18.284884] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq
1,12
[ 18.287775] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.287781] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.300250] mice: PS/2 mouse device common for all mice
[ 18.300381] EISA: Probing bus 0 at eisa.0
[ 18.300416] EISA: Detected 0 cards.
[ 18.300420] cpuidle: using governor ladder
[ 18.300422] cpuidle: using governor menu
[ 18.300519] NET: Registered protocol family 1
[ 18.300551] Using IPI No-Shortcut mode
[ 18.300582] registered taskstats version 1
[ 18.300685] Magic number: 4:338:548
[ 18.300801] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 18.300803] EDD information not available.
[ 18.301108] Freeing unused kernel memory: 364k freed
[ 18.328119] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 19.525200] fuse init (API version 7.9)
[ 19.550710] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 20.118116] usbcore: registered new interface driver usbfs
[ 20.118142] usbcore: registered new interface driver hub
[ 20.131543] usbcore: registered new device driver usb
[ 20.145404] USB Universal Host Controller Interface driver v3.0
[ 20.145475] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 20.145489] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 20.145493] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 20.145785] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 20.145815] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
[ 20.145970] usb usb1: configuration #1 chosen from 1 choice
[ 20.145999] hub 1-0:1.0: USB hub found
[ 20.146006] hub 1-0:1.0: 2 ports detected
[ 20.243258] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 20.243262] e100: Copyright(c) 1999-2006 Intel Corporation
[ 20.250914] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 17
[ 20.250927] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 20.250932] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 20.250957] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 20.250985] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[ 20.251104] usb usb2: configuration #1 chosen from 1 choice
[ 20.251133] hub 2-0:1.0: USB hub found
[ 20.251140] hub 2-0:1.0: 2 ports detected
[ 20.261104] SCSI subsystem initialized
[ 20.299120] libata version 3.00 loaded.
[ 20.351077] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 18
[ 20.351090] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 20.351095] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 20.351120] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 20.351147] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 20.351271] usb usb3: configuration #1 chosen from 1 choice
[ 20.351298] hub 3-0:1.0: USB hub found
[ 20.351305] hub 3-0:1.0: 2 ports detected
[ 20.402557] FDC 0 is a post-1991 82077
[ 20.454792] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) ->
IRQ 16
[ 20.454805] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 20.454810] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 20.454835] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 4
[ 20.454859] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20
[ 20.454979] usb usb4: configuration #1 chosen from 1 choice
[ 20.455010] hub 4-0:1.0: USB hub found
[ 20.455017] hub 4-0:1.0: 2 ports detected
[ 20.558652] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) ->
IRQ 19
[ 20.558671] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 20.558676] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 20.558708] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 5
[ 20.562609] ehci_hcd 0000:00:1d.7: debug port 1
[ 20.562616] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[ 20.562626] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80800
[ 20.590375] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 20.602358] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 20.602521] usb usb5: configuration #1 chosen from 1 choice
[ 20.602549] hub 5-0:1.0: USB hub found
[ 20.602557] hub 5-0:1.0: 8 ports detected
[ 20.706265] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 20.730651] e100: eth0: e100_probe: addr 0xfbffb000, irq 20, MAC addr
00:0c:f1:7b:4d:ec
[ 20.730688] ACPI: PCI Interrupt 0000:02:00.2[B] -> GSI 22 (level, low) ->
IRQ 21
[ 20.780368] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]
MMIO=[fbffa800-fbffafff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 20.786305] ata_piix 0000:00:1f.1: version 2.12
[ 20.786326] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) ->
IRQ 18
[ 20.786370] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 20.787525] scsi0 : ata_piix
[ 20.788389] scsi1 : ata_piix
[ 20.788439] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 20.788443] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 20.949898] ata1.00: ATA-7: Maxtor 6Y120P0, YAR41BW0, max UDMA/133
[ 20.949903] ata1.00: 234375000 sectors, multi 8: LBA
[ 20.965793] ata1.00: configured for UDMA/100
[ 21.049183] usb 5-4: new high speed USB device using ehci_hcd and address 2
[ 21.181866] usb 5-4: configuration #1 chosen from 1 choice
[ 21.301013] ata2.00: ATA-6: IC35L120AVV207-0, V24OA66A, max UDMA/100
[ 21.301018] ata2.00: 241254720 sectors, multi 8: LBA48
[ 21.301042] ata2.01: ATAPI: PLEXTOR DVDR PX-712A, 1.09, max UDMA/33
[ 21.324894] ata2.00: configured for UDMA/100
[ 21.420220] usb 5-5: new high speed USB device using ehci_hcd and address 3
[ 21.488274] ata2.01: configured for UDMA/33
[ 21.488403] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120P0 YAR4
PQ: 0 ANSI: 5
[ 21.488853] scsi 1:0:0:0: Direct-Access ATA IC35L120AVV207-0 V24O
PQ: 0 ANSI: 5
[ 21.489633] scsi 1:0:1:0: CD-ROM PLEXTOR DVDR PX-712A 1.09
PQ: 0 ANSI: 5
[ 21.489706] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 21.489725] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) ->
IRQ 18
[ 21.489766] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 21.490104] scsi2 : ata_piix
[ 21.490272] scsi3 : ata_piix
[ 21.490309] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18
[ 21.490312] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18
[ 21.553000] usb 5-5: configuration #1 chosen from 1 choice
[ 21.572008] usbcore: registered new interface driver libusual
[ 21.578714] Initializing USB Mass Storage driver...
[ 21.579840] scsi4 : SCSI emulation for USB Mass Storage devices
[ 21.580654] usbcore: registered new interface driver usb-storage
[ 21.580660] USB Mass Storage support registered.
[ 21.580755] usb-storage: device found at 3
[ 21.580758] usb-storage: waiting for device to settle before scanning
[ 22.054715] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0411003f94]
[ 23.159618] Driver 'sd' needs updating - please use bus_type methods
[ 23.159714] sd 0:0:0:0: [sda] 234375000 512-byte hardware sectors (120000 MB)
[ 23.159730] sd 0:0:0:0: [sda] Write Protect is off
[ 23.159733] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.159756] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 23.159889] sd 0:0:0:0: [sda] 234375000 512-byte hardware sectors (120000 MB)
[ 23.159902] sd 0:0:0:0: [sda] Write Protect is off
[ 23.159904] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.159926] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 23.159930] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 23.174678] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 23.232649] sd 0:0:0:0: [sda] Attached SCSI disk
[ 23.233653] sd 1:0:0:0: [sdb] 241254720 512-byte hardware sectors (123522 MB)
[ 23.233670] sd 1:0:0:0: [sdb] Write Protect is off
[ 23.233673] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 23.233695] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 23.233751] sd 1:0:0:0: [sdb] 241254720 512-byte hardware sectors (123522 MB)
[ 23.233764] sd 1:0:0:0: [sdb] Write Protect is off
[ 23.233767] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 23.233787] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 23.233792] sdb: sdb1 < sdb5 sdb6 >
[ 23.258328] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 23.268391] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 23.268413] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 23.268454] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 23.270747] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 23.270754] Uniform CD-ROM driver Revision: 3.20
[ 23.270813] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 23.594832] Attempting manual resume
[ 23.594836] swsusp: Resume From Partition 8:8
[ 23.594838] PM: Checking swsusp image.
[ 23.595032] PM: Resume from disk failed.
[ 23.628413] kjournald starting. Commit interval 5 seconds
[ 23.628431] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.567266] usb-storage: device scan complete
[ 26.567886] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S204N TS00
PQ: 0 ANSI: 0
[ 26.575844] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 26.575893] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 26.575931] sr 4:0:0:0: Attached scsi generic sg3 type 5
[ 32.890395] iTCO_vendor_support: vendor-support=0
[ 32.923658] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 32.923798] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1,
TCOBASE=0x0860)
[ 32.923847] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 32.990795] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 33.026859] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 33.089906] Linux agpgart interface v0.102
[ 33.138476] agpgart: Detected an Intel 865 Chipset.
[ 33.144847] agpgart: AGP aperture is 128M @ 0xd0000000
[ 33.209206] intel_rng: Firmware space is locked read-only. If you can't or
[ 33.209209] intel_rng: don't want to disable this in firmware setup, and if
[ 33.209210] intel_rng: you are certain that your system has a functional
[ 33.209212] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 33.266241] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 33.389920] input: Power Button (FF) as /devices/virtual/input/input3
[ 33.401702] ACPI: Power Button (FF) [PWRF]
[ 33.401822] input: Power Button (CM) as /devices/virtual/input/input4
[ 33.421643] ACPI: Power Button (CM) [VBTN]
[ 35.013398] Linux video capture interface: v2.00
[ 35.153539] nvidia: module license 'NVIDIA' taints kernel.
[ 35.868789] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 35.869910] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) ->
IRQ 21
[ 35.869920] saa7134[0]: found at 0000:02:01.0, rev: 1, irq: 21, latency: 64,
mmio: 0xfbffa400
[ 35.869927] saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i
DVB-T + PAL [card=50,autodetected]
[ 35.869942] saa7134[0]: board init: gpio is c806000
[ 36.003063] saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c
55 d2 b2 92
[ 36.003076] saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff
ff ff ff ff
[ 36.003087] saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25
ff ff ff ff
[ 36.003098] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 36.003108] saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff
ff ff ff ff
[ 36.003119] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff
[ 36.003129] saa7134[0]: i2c eeprom 60: 0c 22 17 44 02 94 f7 38 ff ff ff ff
ff ff ff ff
[ 36.003140] saa7134[0]: i2c eeprom 70: 00 30 8d 14 fa 61 ff ff b4 90 ff ff
ff ff ff ff
[ 36.184720] Symbol usb_register_driver is being used by a non-GPL module,
which will not be allowed in the future
[ 36.184727] Please see the file Documentation/feature-removal-schedule.txt
in the kernel source tree for more details.
[ 36.185141] Symbol usb_deregister is being used by a non-GPL module, which
will not be allowed in the future
[ 36.185143] Please see the file Documentation/feature-removal-schedule.txt
in the kernel source tree for more details.
[ 36.187850] fwlanusb: AVM FRITZ!WLAN USB Stick driver, revision 1.00.00
[ 36.187854] fwlanusb: (fwlanusb built on Apr 3 2008 at 00:22:13)
[ 36.187857] fwlanusb: -- 32 bit driver --
[ 36.187858] fwlanusb: Loading...
[ 36.187900] fwlanusb: Found FRITZ!Wlan device.
[ 36.187905] fwlanusb: Driver 'fwlanusb' attached to fwlanusb-stack version
[Protokollstack=1.00.00]. (176)
[ 36.226524] tuner 0-0043: chip found @ 0x86 (saa7134[0])
[ 36.226559] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
[ 36.226562] tuner 0-0043: type set to tda9887
[ 36.242737] Chip ID is not zero. It is not a TEA5767
[ 36.242744] tuner 0-0060: chip found @ 0xc0 (saa7134[0])
[ 36.258428] mt20xx 0-0060: microtune: companycode=3cbf part=42 rev=2f
[ 36.290326] mt20xx 0-0060: microtune MT2050 found, OK
[ 36.290332] tuner 0-0060: type set to MT2050
[ 36.298333] usb 5-4: reset high speed USB device using ehci_hcd and address 2
[ 36.306314] mt20xx 0-0060: microtune: companycode=3cbf part=42 rev=2f
[ 36.342201] mt20xx 0-0060: microtune MT2050 found, OK
[ 36.342206] tuner 0-0060: type set to MT2050
[ 36.347022] saa7134[0]: registered device video0 [v4l2]
[ 36.347050] saa7134[0]: registered device vbi0
[ 36.418154] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 36.418394] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14
17:53:07 PST 2008
[ 36.438399] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input5
[ 36.468548] parport_pc 00:0a: reported by Plug and Play ACPI
[ 36.468602] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
[ 36.470339] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 36.590214] DVB: registering new adapter (saa7134[0])
[ 36.590223] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
[ 36.874692] fwlanusb: Config manager successully created and started.
[ 36.875069] usbcore: registered new interface driver fwlanusb
[ 36.875074] fwlanusb: Loaded.
[ 37.037306] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) ->
IRQ 22
[ 37.040905] ALSA
/build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/emu10k1/../../alsa-kernel/pci/emu10k1/emufx.c:1544:
Installing spdif_bug patch: Audigy 2 ZS [SB0353]
[ 38.664012] lp0: using parport0 (interrupt-driven).
[ 42.897564] NET: Registered protocol family 17
[ 43.002756] ieee1394: raw1394: /dev/raw1394 device initialized
[ 43.172259] Adding 995988k swap on /dev/sda8. Priority:-1 extents:1
across:995988k
[ 44.515456] EXT3 FS on sda7, internal journal
[ 44.700882] device-mapper: uevent: version 1.0.3
[ 44.700917] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised:
[EMAIL PROTECTED]
[ 46.640440] kjournald starting. Commit interval 5 seconds
[ 46.640706] EXT3 FS on sda9, internal journal
[ 46.640711] EXT3-fs: mounted filesystem with ordered data mode.
[ 47.288719] kjournald starting. Commit interval 5 seconds
[ 47.293404] EXT3 FS on sdb5, internal journal
[ 47.293410] EXT3-fs: mounted filesystem with ordered data mode.
[ 48.062450] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 48.125867] NET: Registered protocol family 10
[ 48.126164] lo: Disabled Privacy Extensions
[ 48.680120] No dock devices found.
[ 48.899086] wlan0: duplicate address detected!
[ 52.085873] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 52.248333] ppdev: user-space parallel port driver
[ 52.564755] audit(1207852302.029:2): type=1503 operation="inode_permission"
request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5476
profile="/usr/sbin/cupsd" namespace="default"
[ 52.656586] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 52.656592] apm: overridden by ACPI.
[ 52.943569] Bluetooth: Core ver 2.11
[ 52.944593] NET: Registered protocol family 31
[ 52.944599] Bluetooth: HCI device and connection manager initialized
[ 52.944603] Bluetooth: HCI socket layer initialized
[ 52.969133] Bluetooth: L2CAP ver 2.9
[ 52.969138] Bluetooth: L2CAP socket layer initialized
[ 53.065639] Bluetooth: RFCOMM socket layer initialized
[ 53.065657] Bluetooth: RFCOMM TTY layer initialized
[ 53.065659] Bluetooth: RFCOMM ver 1.8
[ 56.407784] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 56.407804] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 56.407837] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
2. lsmod
Module Size Used by
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
ppdev 10372 0
speedstep_lib 6532 0
cpufreq_userspace 5284 0
cpufreq_conservative 8712 0
cpufreq_powersave 2688 0
cpufreq_ondemand 9740 0
cpufreq_stats 7104 0
freq_table 5536 2 cpufreq_ondemand,cpufreq_stats
dock 11280 0
video 19856 0
output 4736 1 video
sbs 15112 0
sbshc 7680 1 sbs
container 5632 0
battery 14212 0
ipv6 267780 8
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
nls_iso8859_1 4992 2
nls_cp437 6656 2
vfat 14464 2
fat 54556 1 vfat
aes_i586 33536 0
dm_crypt 15364 0
dm_mod 62660 1 dm_crypt
ac 6916 0
raw1394 29144 0
af_packet 23812 4
sbp2 24072 0
lp 12324 0
snd_emu10k1_synth 8064 0
snd_emux_synth 36224 1 snd_emu10k1_synth
snd_seq_virmidi 8192 1 snd_emux_synth
snd_seq_midi_emul 7552 1 snd_emux_synth
snd_emu10k1 146880 4 snd_emu10k1_synth
snd_ac97_codec 101028 1 snd_emu10k1
ac97_bus 3072 1 snd_ac97_codec
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
snd_pcm 78596 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 11400 2 snd_emu10k1,snd_pcm
snd_util_mem 5632 2 snd_emux_synth,snd_emu10k1
snd_hwdep 10500 2 snd_emux_synth,snd_emu10k1
snd_seq_dummy 4868 0
mt352 7556 1
saa7134_dvb 16652 0
videobuf_dvb 7812 1 saa7134_dvb
dvb_core 81404 1 videobuf_dvb
tda1004x 16900 1 saa7134_dvb
snd_seq_oss 35584 0
snd_seq_midi 9376 0
snd_rawmidi 25760 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
dcdbas 9504 0
snd_seq_midi_event 8320 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
parport_pc 36260 1
parport 37832 3 ppdev,lp,parport_pc
fwlanusb 608000 0
tuner 42912 0
tea5767 6788 1 tuner
tda8290 12420 1 tuner
tuner_simple 10248 1 tuner
mt20xx 13192 1 tuner
tea5761 6020 1 tuner
snd_seq 54224 9
snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
evdev 13056 3
snd_timer 24836 3 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device 9612 8
snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
saa7134 131920 1 saa7134_dvb
snd 56996 20
snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 40336 0
compat_ioctl32 2304 1 saa7134
videobuf_dma_sg 14980 3 saa7134_dvb,videobuf_dvb,saa7134
videobuf_core 18820 3 videobuf_dvb,saa7134,videobuf_dma_sg
ir_kbd_i2c 10768 1 saa7134
ir_common 36100 2 saa7134,ir_kbd_i2c
serio_raw 7940 0
nvidia 7825536 24
videodev 29440 1 saa7134
v4l2_common 18304 3 tuner,saa7134,videodev
v4l1_compat 15492 2 saa7134,videodev
soundcore 8800 1 snd
i2c_core 24832 12
mt352,saa7134_dvb,tda1004x,tuner,tea5767,tda8290,tuner_simple,mt20xx,tea5761,saa7134,ir_kbd_i2c,nvidia
button 9232 0
pcspkr 4224 0
intel_agp 25492 1
agpgart 34760 2 nvidia,intel_agp
shpchp 34452 0
pci_hotplug 30880 1 shpchp
iTCO_wdt 13092 0
iTCO_vendor_support 4868 1 iTCO_wdt
ext3 136712 3
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36880 0
sr_mod 17956 0
cdrom 37408 1 sr_mod
sd_mod 30720 10
pata_acpi 8320 0
ata_generic 8324 0
usb_storage 73664 0
libusual 19108 1 usb_storage
floppy 59588 0
ata_piix 19588 8
libata 159344 3 pata_acpi,ata_generic,ata_piix
ohci1394 33584 0
scsi_mod 151436 6 sbp2,sg,sr_mod,sd_mod,usb_storage,libata
e100 37388 0
mii 6400 1 e100
ieee1394 93752 3 raw1394,sbp2,ohci1394
ehci_hcd 37900 0
uhci_hcd 27024 0
usbcore 146028 6 fwlanusb,usb_storage,libusual,ehci_hcd,uhci_hcd
thermal 16796 0
processor 36872 1 thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50580 5
3. lspci
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub
Interface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface
Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller
(rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev
02)
01:00.0 VGA compatible controller: nVidia Corporation NV44A [GeForce 6200] (rev
a1)
02:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
02:00.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
02:01.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video
Broadcast Decoder (rev 01)
02:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet
Controller (rev 02)
And I havn't yet followed Juans recommendation since I am not familiar with the
procedure of compiling kernel moduls.
Regards,
Bozza
--
[hardy][2.6.24-15] Failed to initialize HAL
https://bugs.launchpad.net/bugs/212221
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
